Re: Remote Web Workplace not working after installing ISA server 2

Yes I installed the clients on workstations replacing the old clients even
thought the old clients were working. About the new clients the functionality
changed? Because with the old client if I disable the client I was unable to
connect to internet but with the new client I can disable it and I can
connect to the internet.
Thanks a lot
--
Oswaldo Cortes


"Cris Hanna [SBS-MVP]" wrote:

> Did you install the firewall clients on your workstations??
>
> --
> Cris Hanna [SBS-MVP]
> -------------------------------------------------
> Please do not email me directly for assistance. Reply only in the Newsgroups for the benefit of everyone
> "Oswaldo" <Oswaldo@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message news:1EB9DB93-656E-4235-8744-1E4C0A690981@xxxxxxxxxxxxxxxx
> Hello again,
> I found an article about Extending the ISA Firewall’s SSL Tunnel Port Range
> to add ports for the SSL
> http://www.isaserver.org/articles/2004tunnelportrange.html. It looks good but
> I don't know which ports should I add. How can I know the ports to add?
> Thanks a lot
> --
> Oswaldo Cortes
>
>
> "Oswaldo" wrote:
>
> > Hi,
> > I found a way to fix the problem but I am not sure if it is the best. I was
> > having problems with SSL sites, I was getting a blank page or page cannot be
> > displayed error with https sites.
> > I configured my IE no to use proxy and now I can see the https sites with no
> > problems and the Web Workplace is working fine.
> > I feel that I have to configure the proxy so I can use the Remote Web
> > Workplace and see ssl sites using it, but I don't know how.
> > Any suggestions?
> >
> > --
> > Oswaldo Cortes
> >
> >
> > "Oswaldo" wrote:
> >
> > > Hi Cris,
> > > I applied the Service Pack 1 for SBS and install ISA from the Premium
> > > Technologies CD. I was thinking that the Internet connection wizard will fix
> > > the problem because I enable the Remote Web Workplace access but it didn't
> > > work.
> > > Any ideas?
> > >
> > > --
> > > Oswaldo Cortes
> > >
> > >
> > > "Cris Hanna [SBS-MVP]" wrote:
> > >
> > > > did you do this by applying Service Pack 1 for SBS or just updating ISA??? and was this retail ISA??
> > > >
> > > > --
> > > > Cris Hanna [SBS-MVP]
> > > > -------------------------------------------------
> > > > Please do not email me directly for assistance. Reply only in the Newsgroups for the benefit of everyone
> > > > "Oswaldo" <Oswaldo@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message news:C668C233-F028-48C7-B1EA-52CAD26EBCA2@xxxxxxxxxxxxxxxx
> > > > Hi,
> > > > I updated my ISA server from 2000 to 2004 and now I cannot connect to any
> > > > computer using the Remote Web Workplace. I can log in and see the computers
> > > > but when I try to connect I get an error screen telling me that the
> > > > connection couldn't be establish. I ran the internet connection wizard and
> > > > the remote connections wizard again an I cannot make it work. Everything was
> > > > working fine with ISA server 2000. What can I do to enable the Remote Web
> > > > Workplace?
> > > > Thank you very much
> > > > --
> > > > Oswaldo Cortes
.

Relevant Pages

  • Whos blocking these ports? Please help...
    ... server - one is called Vicomsoft Internet Gateway (proxy server, ... IG basically takes over the TCP/IP routing and does this using ... Each of these ports uses a NIC in the server. ... All the clients are assigned IPs ...
    (microsoft.public.win2000.security)
  • Re: Firewall advice
    ... > The VPN will only way for outside users to connect. ... old ipchains you'd be allowing inbound on the unpriv'd ports anyway. ... You'll need to let 3389 in from the PPTP sessions. ... IP's if only a few clients) to route through. ...
    (comp.security.firewalls)
  • Re: Open Ports
    ... want the ports open even ifs all in house and behind the hardware firewall??? ... it opens up in demo mode. ... server is Cisco Catalyst Express 500 switches for voice over IP. ... will take requests from the clients. ...
    (microsoft.public.windows.server.general)
  • RE: [fw-wiz] Defense in Depth to the Desktop
    ... feel that servers are the best defended resources on the network. ... while exposing the servers to the risks of the clients. ... MAC isolation (or private vlans in Cisco(tm) speak) block any traffic to vlan ... ports that are not designated as "community" or "public" ports. ...
    (Firewall-Wizards)
  • Re: NAT Problem Port Forwarding
    ... If the clients are XP with firewalls enabled (or any OS with a firewall ... you will have to open these ports on the clients as well. ... > -Internal NIC as private interface... ... I need to forward traffic from the internet to my Windows 2003 DC TCP ...
    (microsoft.public.windows.server.networking)