Re: W32 time problem on SBS2003 Premium

I have the same problem with one server, it would be nice to find an answer.

"Ken-T" <KenT@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:7FB190AA-CA2B-499C-9895-7A6B433D0751@xxxxxxxxxxxxxxxx
> Thanks for the input,
>
> HKLM\System\CurrentControlSet\Services\W32Time\Parameters/Type is set to
> NTP
> NtpServer Param is currently set to time.windows.com,0x1
> (Am testing this after reading
> http://support.microsoft.com/default.aspx?scid=kb;en-us;816042#XSLTH3163121123120121120120 )
>
> Have been trying up to now with NtpServer set as time.nist.gov,0x8 or
> ptbtime1.ptb.de,0x8. Even tried time.windows.com.
>
> Always with same results.
>
>
> Ken
>
> "jjjdavidson" wrote:
>
>> Under HKLM\System\CurrentControlSet\Services\W32Time\Parameters, have you
>> made sure that Type is "NTP" instead of "NT5DS"? Something in SBS keeps
>> resetting that on our server. While you're there, double-check the
>> NtpServer
>> parameter.
>>
>> "Ken-T" wrote:
>>
>> >
>> > Am having the same problem with W32Time as others here.
>> > System is SBS2003 with SP1.
>> > Do not have ISA installed and have follwed the instructions at :
>> > http://www.smallbizserver.net/Default.aspx?tabid=142 to the letter.
>> > Have tried numerous time servers, am currently using ptbtime1.ptb.de
>> > which
>> > is working fine with our router. All outbound router ports are open.
>> >
>> > Command w32tm /resync always errors with could not be synced since no
>> > time
>> > available.
>> > After 24 hours the usual "The time service has not synchronized the
>> > system
>> > time for 86400 " etc etc in the log.
>> >
>> > If anyone out there has further ideas for fixing I would be very
>> > grateful.
>> >


.

Relevant Pages

  • ntpdate synchronization b/w two ntpserver
    ... ntpdate uses port 123 UDP to connect to ntp Server ... firewall for randomn ports. ... As a workaround i decide to run ntpserver on my ntpclient. ...
    (SunManagers)
  • RE: W32 time problem on SBS2003 Premium
    ... resetting that on our server. ... While you're there, double-check the NtpServer ... > Am having the same problem with W32Time as others here. ... All outbound router ports are open. ...
    (microsoft.public.windows.server.sbs)
  • Re: Synctime
    ... On the affected machine open regedit and go to: ... Double click Ntpserver and in the value data box, ... I like to have backup on top of backups. ...
    (microsoft.public.windows.server.sbs)
  • RE: W32 time problem on SBS2003 Premium
    ... NtpServer Param is currently set to time.windows.com,0x1 ... (Am testing this after reading ... All outbound router ports are open. ...
    (microsoft.public.windows.server.sbs)
Loading