Re: VPN & ISA

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

Ok,

Got the blinking cursor, but the VPN connection still give error 800. I
tried both the internal IP and the server name.

What's next?


"Les Connor [SBS Community Member - SBS MVP]" <les.connor@xxxxxxxxxxxx>
wrote in message news:u1nD0YIiFHA.2484@xxxxxxxxxxxxxxxxxxxxxxx
> Hi Randy,
>
> Forget the connection manager for now.
>
> On a lan client, open a dos box and telnet <sbsservername> 1723. If you
> get a blinking cursor, something is listening and answering.
>
> On the lan client, in network connections - run the wizard to create new
> VPN connection. Use the servername or the lan nic IP address of the server
> you want to connect to.
>
> If this works, then you can move outside the lan and test from there.
>
> --
> Les Connor [SBS Community Member - SBS MVP]
> -----------------------------------------------------------
> SBS Rocks !
>
>
> "Randy Whitehead" <randy_whitehead@xxxxxxxxxxxxxxxxx> wrote in message
> news:%23f363LIiFHA.2156@xxxxxxxxxxxxxxxxxxxxxxx
>> At this point I am only trying inside the LAN. Once I get that working I
>> will tackle the outside.
>>
>>
>> "Mal the Evil IT manager" <No@xxxxxxx> wrote in message
>> news:a7ucd1hts6p855o2h6q2dspmn0i2pfo8v0@xxxxxxxxxx
>>>
>>>
>>> Are you using a router, does it alliw VPN passthrough (protocol 47/GRE
>>> )
>>>
>>>
>>> http://support.microsoft.com/?id=319108
>>>
>>> Mal
>>>
>>>
>>> On Thu, 14 Jul 2005 09:09:52 -0400, "Randy Whitehead"
>>> <randy_whitehead@xxxxxxxxxxxxxxxxx> wrote:
>>>
>>>>I think I have tried just about everything that I can to get my VPN
>>>>working,
>>>>but no luck.
>>>>
>>>>Currently running SBS2003 Premium
>>>>ISA Server
>>>>Client is a XP SP2
>>>>
>>>>I reran ICW and made sure VPN was enabled.
>>>>
>>>>I ran the remote access wizard.
>>>>
>>>>I checked to see that the server was listening on 1723.
>>>>
>>>>I reinstalled the connection manager.
>>>>
>>>>When I tried to connect from a computer on the LAN, I get - error 800
>>>>
>>>>I went back and ran the ISA allow client VPN wizard
>>>>
>>>>I checked the packet filters for VPN, and all are set to enabled
>>>>
>>>>Still getting error 800
>>>>
>>>>Any Ideas?
>>>>
>>>>
>>>
>>
>>
>
>


.

Relevant Pages

  • Re: Problem with a VPN an a ICS
    ... I have a DSL router which I cannot manage, I couldn't configure RRAS. ... At LAN 2, if I use tracert, obviously trafic stops at LAN 2 server because ... > I have LAN 1 with Windows Server 2003 with VPN server configured, ... I have added in this server a VPN connection to LAN 1 server. ...
    (microsoft.public.windows.server.networking)
  • Re: VPN Connection - Cant establish connection!
    ... > I have not tried the VPN connection within the LAN but will do so. ... >> the GRE protocol 47 from the router to your SBS. ... >>> The server is behind a router that allows IPSec, ...
    (microsoft.public.windows.server.sbs)
  • FW: POCKET-PC: HOW TO SECURE ACCESS FROM A POCKET PC OUTSIDE TO A SERVER IN THE LAN
    ... I would recommend using a VPN connection on the PDA, ... then be terminated onto a server. ... Subject: POCKET-PC: HOW TO SECURE ACCESS FROM A POCKET PC OUTSIDE TO A ... SERVER IN THE LAN ...
    (Security-Basics)
  • Re: VPN & ISA
    ... I am running ISA 2k, haven't installed SP1 yet on SBS2k3. ... >> Got the blinking cursor, but the VPN connection still give error 800. ... >> tried both the internal IP and the server name. ...
    (microsoft.public.windows.server.sbs)
  • Re: Routing and Remote Access
    ... The internal interface is the endpoint for the VPN connection. ... to the server on the LAN. ...
    (microsoft.public.windows.server.networking)