RE: POP3 Connector
- From: v-natliu@xxxxxxxxxxxxxxxxxxxx (Nathan Liu [MSFT])
- Date: Wed, 13 Jul 2005 05:35:40 GMT
Hello Matthew,
Thank you for posting in the SBS newsgroup.
Also, many thanks for moismoje's input.
According to your description, I understand that you would like to
configure the POP3 Connector to retrieve e-mail from multiple individual
mailboxes with multiple domains. If I have misunderstood your concern,
please don't hesitate to let me know.
To narrow down this issue, please answer and perform the following
questions and steps:
1. As you mentioned, you have the pop3 connector configured to collect
from 3 separate pop3 accounts with all 3 domains having the same user
prefix anyone@. Please refer to the below KB article to configure the
Exchange to receive mail from multiple domains:
268838 Configuring Exchange to receive mail from multiple domains
http://support.microsoft.com/?id=268838
After you finish the above steps, please try again, and then check if the
issue can be re-produced.
2. If the issue persists, please refer to the below information to enable
Diagnostic Logging on POP3 Connector:
1) Click Start, point to Programs, point to Microsoft Exchange, and
then click System Manager.
2) In the left pane, expand the Connectors node.
3) Right-click "Connector for POP3 Mailboxes", and then click
Properties.
4) In the "Connector for POP3 Mailboxes Properties" dialog box,
click Diagnostic Logging.
5) Verify that the "Enable event logging on the services" check box
is selected.
6) Under the Services box, click Delivery Service, and under Logging
Level click Maximum.
7) Click OK to apply changes.
8) Close the System Manager console.
9) Click Start, point to Programs, point to Administrative Tools,
and then click Services.
10) In the left pane, right-click "Microsoft Connector for POP3",
and then click Restart. After the service restarts, close the Services
Management console.
After the problem occurs again, the events of POP3 connector will be
created in Application event log. Please check the Application event log
whether there are any error messages noted on this issue, then paste the
full context in your reply.
3. Please refer to the below steps to enable SMTP logging:
1) Open the properties page of the Default SMTP Virtual Server in
Exchange System Manager.
2) On the General tab, check the "Enable logging" box.
3) Click Properties, click the Extended Properties tab and check all
the boxes on the list.
4) Click OK twice.
5) Stop and restart the SMTP virtual server.
6) Reproduce the issue.
7) Stop the SMTP virtual server.
8) Go to the C:\WINDOWS\system32\LogFiles\SMTPSVC1 folder and check
the latest two (if there are many) log files.
To get additional information, you may refer to the following KB article:
249299 HOW TO: Configure Recipient Policies in Exchange
http://support.microsoft.com/?id=249299
I am appreciated your time and cooperation. If anything is unclear, please
feel free to let me know. I am looking forward to hearing from you.
Best regards,
Nathan Liu (MSFT)
Microsoft CSS Online Newsgroup Support
Get Secure! - www.microsoft.com/security
=====================================================
When responding to posts, please "Reply to Group" via your newsreader so
that others may learn and benefit from your issue.
=====================================================
This posting is provided "AS IS" with no warranties, and confers no rights.
--------------------
>Thread-Topic: POP3 Connector
>thread-index: AcWHKdjUnB1vzdeOT0qtpMMVyO8vAQ==
>X-WBNR-Posting-Host: 212.57.244.158
>From: =?Utf-8?B?TWF0dGhldyBTaGFybG90?=
<MatthewSharlot@xxxxxxxxxxxxxxxxxxxxxxxxx>
>Subject: POP3 Connector
>Date: Tue, 12 Jul 2005 14:37:05 -0700
>Lines: 21
>Message-ID: <2815555D-C988-4361-A54F-588846D29A3B@xxxxxxxxxxxxx>
>MIME-Version: 1.0
>Content-Type: text/plain;
> charset="Utf-8"
>Content-Transfer-Encoding: 7bit
>X-Newsreader: Microsoft CDO for Windows 2000
>Content-Class: urn:content-classes:message
>Importance: normal
>Priority: normal
>X-MimeOLE: Produced By Microsoft MimeOLE V6.00.3790.0
>Newsgroups: microsoft.public.windows.server.sbs
>NNTP-Posting-Host: TK2MSFTNGXA03.phx.gbl 10.40.2.250
>Path: TK2MSFTNGXA01.phx.gbl!TK2MSFTNGXA03.phx.gbl
>Xref: TK2MSFTNGXA01.phx.gbl microsoft.public.windows.server.sbs:135162
>X-Tomcat-NG: microsoft.public.windows.server.sbs
>
>Hi, I'm new to SBS so please forgive my ignorance. (Please use only
obvious
>abbreviations in replies as it takes me ages to figure what they mean!)
>I'm running SBS2003 with Exchange SP1 applied.
>I have the pop3 connector configured to collect from 3 seperate pop3
>accounts with all 3 domains having the same user prefix anyone@. The
problem
>seems to be that only mail to the domain name set as the primary seems to
get
>delivered, with mail for the same user at another domain being sent to the
>administrator account.
>e.g. anyone@xxxxxxxxxxx is the primary address for the user and mail to
this
>address gets delivered to their mailbox. The same user has other addresses
>such as anyone@xxxxxxxxxxx and these do not get delivered.
>In an effort to fix this problem quickly a colleague has installed an
>evaluation copy of an app called POPCon, which works great. Thing is that
I
>will have to pay for this (yes I am that tight!), and I'm thinking if
there
>is a component of SBS that will do the job if properly configured then I
>should be trying to use that rather than using 3rd party apps. I'm sure I
>will come accross this again, so I thought I'd ask the question
>
>TIA
>
>Matthew
>
.
- Follow-Ups:
- RE: POP3 Connector
- From: Matthew Sharlot
- RE: POP3 Connector
- From: Matthew Sharlot
- RE: POP3 Connector
- References:
- POP3 Connector
- From: Matthew Sharlot
- POP3 Connector
- Prev by Date: RE: Upgrading Small Business Server 2003 to Premium hanging on SQL Ser
- Next by Date: Re: Delivery Reciets
- Previous by thread: RE: POP3 Connector
- Next by thread: RE: POP3 Connector
- Index(es):
Relevant Pages
|
