Re: More RAID 1 questions

Looks to me like you've already got a raid 1 set up;

Physical drive 0 and 1 are a raid set, identified by the Logical Drive: Sil
Raid1 set.

You can't create any more raid sets, as all your drives are already in raid
sets.

--
Les Connor [SBS Community Member - SBS MVP]
-----------------------------------------------------------
SBS Rocks !


"lorne balsam" <lbalsam@xxxxxxxxxxxx> wrote in message
news:OeFngijgFHA.1444@xxxxxxxxxxxxxxxxxxxxxxx
>I started a new thread as i figured out that i had to load the drivers for
> the SATARaid configuration software to work.... oh silly me.
> Now, in the configuration window, when i click on setup RAID 1, it says
> there are not enough single drives.
> THere are several windows in the configuration setup.....
> One window shows: create RAID set, delete RAID set, rebuild RAID 1 set,
> resolve conflicts, low level format and logical drive info.
> 2nd window: Help info
> 3rd window: Physical Drives: lists 0 ST3160827AS 152627MB
> 1 ST3160827AS 152627MB
> 4th window: Logical Drive: Sil RAID1 set 152626 MB
>
> Can I not use RAID1 with 2 drives?
> Does the low level format refer to the 2nd hard drive?
>
>


.

Relevant Pages

  • More RAID 1 questions
    ... Now, in the configuration window, when i click on setup RAID 1, it says ... create RAID set, delete RAID set, rebuild RAID 1 set, ... Can I not use RAID1 with 2 drives? ...
    (microsoft.public.windows.server.sbs)
  • Re: More RAID 1 questions
    ... >> the SATARaid configuration software to work.... ... >> Now, in the configuration window, when i click on setup RAID 1, it says ... >> there are not enough single drives. ... create RAID set, delete RAID set, rebuild RAID 1 set, ...
    (microsoft.public.windows.server.sbs)
  • Re: adding disks
    ... Are you buying the disks new from IBM? ... and add them to the RAID set). ... So even if you don't get the drives new, ... You've got between 30 and 60 seconds to install the drive, ...
    (comp.sys.ibm.as400.misc)
  • Upgrade & Migrate Plan
    ... As for moving the OS from one RAID set to another RAID set ... (larger drives), I ended up using Ghost 6.5 Enterprize to ... >I need to upgrade our Windows 2000 Advanced Server to SBS ...
    (microsoft.public.windows.server.sbs)
  • Re: Possible to delete RAID metadata from hard drives?
    ... "signatures") from my hard drives? ... the two drives as a RAID set because of the metadata present on them. ... Complete disk/parition blanking under Linux: ...
    (comp.sys.ibm.pc.hardware.storage)