Re: CEICW Fails at RegisterMSBOExchangeBP

This is the ip on or external NIC. The ip was suggested by our router when
it had DHCP on so I left it after disabling DHCP on the router.
Which sites do you recommend I do without? I have to keep at least the
external and the one for the email.

Thanks
Bob
"Marina Roos [SBS-MVP]" <marina@xxxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:edfgeECgFHA.3124@xxxxxxxxxxxxxxxxxxxxxxx
> Hi Bob,
>
> But where does this IP come from? It is the external nic IP, and that
> shouldn't be listed in IIS I think. Anyway, with all those silly websites
> you are bound to run into problems with CEICW. The error you get is
> pointing
> to that, but we don't know enough about this specific error. If you are a
> MS
> Partner, you might want to post in the Partner Newsgroups. Else I would
> suggest you call MS PSS. No way we can solve this in the public
> newsgroups.
>
> --
> Regards,
>
> Marina Roos
> Microsoft SBS-MVP
> One of the Magical M&M's
> www.smallbizserver.net
> Take part in SBS forum:
> http://www.smallbizserver.net/Default.aspx?tabid=53
>
> "Bob Snee" <swsupport@xxxxxxxxxxxxxxx> schreef in bericht
> news:%230d0JxBgFHA.3436@xxxxxxxxxxxxxxxxxxxxxxx
>> That is our external company website for customer browsing and company
>> information.
>>
>> Bob
>>
>> "Marina Roos [SBS-MVP]" <marina@xxxxxxxxxxxxxxxxxxxxxxxxxx> wrote in
> message
>> news:eo4AbT$fFHA.1996@xxxxxxxxxxxxxxxxxxxxxxx
>> > Hi Bob,
>> >
>> > What is that website that is running on 192.168.1.101???
>> >
>> > --
>> > Regards,
>> >
>> > Marina Roos
>> > Microsoft SBS-MVP
>> > One of the Magical M&M's
>> > www.smallbizserver.net
>> > Take part in SBS forum:
>> > http://www.smallbizserver.net/Default.aspx?tabid=53
>> >
>> > "Bob Snee" <swsupport@xxxxxxxxxxxxxxx> schreef in bericht
>> > news:O99vP49fFHA.1948@xxxxxxxxxxxxxxxxxxxxxxx
>> >> No solution? That is not good! Is it possible to deactivate ISA 2004
>> >> until
>> > a
>> >> fix is found?
>> >> Here are my sites:
>> >>
>> >> Microsoft SharePoint Administrator Identifier 2 Host header blank IP
> All
>> >> Unassigned port 6023
>> >> External Identifier 2092244365 Host header blank IP 192.168.1.101 port
> 80
>> >> SharePoint Central Administrator Identifier 3 Host header blank IP All
>> >> Unassigned port 8081
>> >> companyweb Identifier 4 Host header companyweb IP 192.168.0.24 Port 80
>> >> SSL
>> >> port 444
>> >> Microsoft Operations Manager Identifier 5 Host header blank IP All
>> >> Unassigned port 1272
>> >> Symantec Mail Security for Microsoft Exchange Identifier 6 Host header
>> > blank
>> >> IP All Unassigned Port 8082
>> >> Default Web Site Identifier 990577302 Host header blank IP
>> >> 192.168.0.24
>> > Port
>> >> 80 SSL 443
>> >>
>> >> Is it possible one of these sites is the problem? I can deactivate any
> of
>> >> these except External and Default and be ok temporarily.
>> >>
>> >> Thanks
>> >> Bob
>> >> "Marina Roos [SBS-MVP]" <marina@xxxxxxxxxxxxxxxxxxxxxxxxxx> wrote in
>> > message
>> >> news:OWB2567fFHA.460@xxxxxxxxxxxxxxxxxxxxxxx
>> >> > Hi Bob,
>> >> >
>> >> > This is a new error in ISA 2004 and you are not the first one. I
>> >> > haven't
>> >> > seen a solution yet.
>> >> > Smallbizserver.Net > Smallbizserver.Net Forum > CEICW Dramas:
>> >> >
>> >
> http://www.smallbizserver.net/Default.aspx?tabid=53&view=topic&forumid=11&postid=5612
>> >> >
>> >> > Can you please list all the websites you have in IIS with the
>> >> > properties
>> >> > (hostheader, IP, port number)?
>> >> >
>> >> > --
>> >> > Regards,
>> >> >
>> >> > Marina Roos
>> >> > Microsoft SBS-MVP
>> >> > One of the Magical M&M's
>> >> > www.smallbizserver.net
>> >> > Take part in SBS forum:
>> >> > http://www.smallbizserver.net/Default.aspx?tabid=53
>> >> >
>> >> > "Bob Snee" <swsupport@xxxxxxxxxxxxxxx> schreef in bericht
>> >> > news:OIo$yg4fFHA.2484@xxxxxxxxxxxxxxxxxxxxxxx
>> >> >> I am trying to bring a upgraded server on line and I am getting
> errors
>> >> > when
>> >> >> I run the CEICW. The relevent errors are:
>> >> >>
>> >> >> Error 0x1 returned from call to RegisterMSBOExchangeBP().
>> >> >> Error 0x80070057 returned from call to Configuring anonymous access
>> >> >> for
>> >> > SBS
>> >> >> dirs().
>> >> >> Error 0x80070057 returned from call to
>> >> >> CStingrayCommit::DoGeneralConfiguration().
>> >> >> Error 0x80070057 returned from call to Doing general
> configuration().
>> >> >> Error 0x80070057 returned from call to CStingrayCommit::CommitEx().
>> >> >>
>> >> >> Here are my ipconfig settings:
>> >> >>
>> >> >> Microsoft Windows [Version 5.2.3790]
>> >> >> (C) Copyright 1985-2003 Microsoft Corp.
>> >> >>
>> >> >> C:\Documents and Settings\Administrator>ipconfig /all
>> >> >>
>> >> >> Windows IP Configuration
>> >> >>
>> >> >> Host Name . . . . . . . . . . . . : microtek-web
>> >> >> Primary Dns Suffix . . . . . . . : Microtekstl.local
>> >> >> Node Type . . . . . . . . . . . . : Unknown
>> >> >> IP Routing Enabled. . . . . . . . : Yes
>> >> >> WINS Proxy Enabled. . . . . . . . : Yes
>> >> >> DNS Suffix Search List. . . . . . : Microtekstl.local
>> >> >>
>> >> >> Ethernet adapter Network Connection:
>> >> >>
>> >> >> Connection-specific DNS Suffix . :
>> >> >> Description . . . . . . . . . . . : Realtek RTL8139 Family PCI
> Fast
>> >> >> Ethernet
>> >> >> NIC
>> >> >> Physical Address. . . . . . . . . : 00-40-05-04-D7-62
>> >> >> DHCP Enabled. . . . . . . . . . . : No
>> >> >> IP Address. . . . . . . . . . . . : 192.168.1.101
>> >> >> Subnet Mask . . . . . . . . . . . : 255.255.255.0
>> >> >> Default Gateway . . . . . . . . . : 192.168.1.1
>> >> >> DNS Servers . . . . . . . . . . . : 192.168.0.24
>> >> >> NetBIOS over Tcpip. . . . . . . . : Disabled
>> >> >>
>> >> >> Ethernet adapter Server Local Area Connection:
>> >> >>
>> >> >> Connection-specific DNS Suffix . :
>> >> >> Description . . . . . . . . . . . : Broadcom NetXtreme 5751
> Gigabit
>> >> >> Controlle
>> >> >> r
>> >> >> Physical Address. . . . . . . . . : 00-13-20-09-D8-DB
>> >> >> DHCP Enabled. . . . . . . . . . . : No
>> >> >> IP Address. . . . . . . . . . . . : 192.168.0.24
>> >> >> Subnet Mask . . . . . . . . . . . : 255.255.255.0
>> >> >> Default Gateway . . . . . . . . . :
>> >> >> DNS Servers . . . . . . . . . . . : 192.168.0.24
>> >> >> Primary WINS Server . . . . . . . : 192.168.0.24
>> >> >>
>> >> >> Here is the full icwlog.txt:
>> >> >>
>> >> >>
>> >> >> 7/2/2005 11:14 PM
>> >> >> d:\Program Files\Microsoft Windows Small Business
>> >> >> Server\Networking\ICW\wizinet.dll, version 5.2.2893.0
>> >> >> calling CNetCommit::ValidatePropertyBag ().
>> >> >> Call to Querying for the property bag () returned ok.
>> >> >> Call to Reading hardware selection () returned ok.
>> >> >> Hardware selection: 0
>> >> >> Call to Validating hardware selection () returned ok.
>> >> >> Call to Initializing the Stingray util in ValidateNICProperties ()
>> >> > returned
>> >> >> ok.
>> >> >> Call to Reading LAN NIC Guid () returned ok.
>> >> >> LAN NIC Guid: {DEABD7B4-E355-404F-B3F9-17E5C44EBADA}
>> >> >> Call to Validating LAN NIC Guid () returned ok.
>> >> >> Call to Getting the IP address for the LAN NIC () returned ok.
>> >> >> LAN NIC IP: 192.168.0.24
>> >> >> Call to Validating NIC properties () returned ok.
>> >> >> Broadband selection: 1
>> >> >> Call to Validating broadband selection () returned ok.
>> >> >> calling CNetCommit::ValidateRouterConnectionProperties ().
>> >> >> Call to Reading UPNP selection () returned ok.
>> >> >> NOT a UPnP router
>> >> >> Call to Reading Router IP () returned ok.
>> >> >> Router IP: 192.168.1.1
>> >> >> Call to Validating Router IP () returned ok.
>> >> >> Call to Reading preferred DNS server IP () returned ok.
>> >> >> Preferred DNS server IP: 151.164.14.201
>> >> >> Call to Validating preferred DNS server IP () returned ok.
>> >> >> Call to Reading alternate DNS server IP () returned ok.
>> >> >> Alternate DNS server IP: 151.164.88.200
>> >> >> Call to Validating alternate DNS server IP () returned ok.
>> >> >> Call to Validating preferred and alternate DNS servers () returned
> ok.
>> >> >> Call to Reading router on second NIC () returned ok.
>> >> >> Router is connected through the second NIC
>> >> >> Call to Initializing the Stingray util in ValidateNICProperties ()
>> >> > returned
>> >> >> ok.
>> >> >> Call to Reading LAN NIC Guid () returned ok.
>> >> >> LAN NIC Guid: {DEABD7B4-E355-404F-B3F9-17E5C44EBADA}
>> >> >> Call to Validating LAN NIC Guid () returned ok.
>> >> >> Call to Getting the IP address for the LAN NIC () returned ok.
>> >> >> LAN NIC IP: 192.168.0.24
>> >> >> Call to Reading 2nd NIC Guid () returned ok.
>> >> >> External NIC Guid: {B7637F07-C33D-45C0-AAC5-3EE2CF0B3BC4}
>> >> >> Call to Validating external NIC Guid () returned ok.
>> >> >> Call to Validating the external IP against LAT () returned ok.
>> >> >> Call to CNetCommit::ValidateRouterConnectionProperties () returned
> ok.
>> >> >>
>> >> >> 7/2/2005 11:14 PM
>> >> >> d:\Program Files\Microsoft Windows Small Business
>> >> >> Server\Networking\ICW\wizproxy.dll, version 5.2.2893.0
>> >> >> CStingrayCommit::ValidatePropertyBag
>> >> >> Call to Querying for IPropertyPagePropertyBag () returned ok.
>> >> >> Call to Initializing the StringrayUtil () returned ok.
>> >> >> Call to Reading the firewall selection () returned ok.
>> >> >> Firewall selection: 1
>> >> >> CStingrayCommit::ValidateUpnpProperties
>> >> >> Call to Reading the UPNP selection () returned ok.
>> >> >> Skipping upnp validation
>> >> >> Call to CStingrayCommit::ValidateUpnpProperties () returned ok.
>> >> >> Call to Validating Upnp properties () returned ok.
>> >> >> CStingrayCommit::ValidatePortMappings
>> >> >> Call to Reading the port mappings () returned ok.
>> >> >> Call to Loading port mappings XML () returned ok.
>> >> >> Call to Validating the predefined port mappings XML () returned ok.
>> >> >> Call to Reading the custom port mappings () returned ok.
>> >> >> Loading port mapping XML
>> >> >> Call to Validating the custom port mappings XML () returned ok.
>> >> >> Call to CStingrayCommit::ValidatePortMappings () returned ok.
>> >> >> Call to Validating port mappings () returned ok.
>> >> >> CStingrayCommit::ValidateWebPublishingRules
>> >> >> Call to Reading web publishing selection () returned ok.
>> >> >> Call to CStingrayCommit::ValidateWebPublishingRules () returned ok.
>> >> >> Call to Validating web publishing rules () returned ok.
>> >> >> Call to CStingrayCommit::ValidatePropertyBag () returned ok.
>> >> >>
>> >> >> 7/2/2005 11:14 PM
>> >> >> d:\Program Files\Microsoft Windows Small Business
>> >> >> Server\Networking\ICW\wizcert.dll, version 5.2.2893.0
>> >> >> Calling CCertCommit::ValidatePropertyBag
>> >> >> Require SSL for OWA: 1
>> >> >> Require SSL for Remote Portal: 1
>> >> >> Require SSL for Monitoring: 0
>> >> >> Require SSL for OMA: 0
>> >> >> Require SSL for CompanyWeb: 0
>> >> >> Require 128 Bit Encryption: 1
>> >> >> Cert selection: 1
>> >> >> Web server name: microtek-web.microtekstl.com
>> >> >> CCertCommit::ValidatePropertyBag returned OK
>> >> >>
>> >> >> 7/2/2005 11:14 PM
>> >> >> d:\Program Files\Microsoft Windows Small Business
>> >> >> Server\Networking\ICW\wizemail.dll, version 5.2.2893.0
>> >> >> calling CEmailCommit::ValidatePropertyBag ().
>> >> >> calling pdispPPPBag->QueryInterface (IPropertyPagePropertyBag,
>> > 0x6e50c).
>> >> >> Call to pdispPPPBag->QueryInterface () returned ok.
>> >> >> calling ReadInt4 (0x25b7e8, DB5E5E45-3598-4F1D-8FF7-0ED35B9EB6A4).
>> >> >> Call to ReadInt4 () returned ok.
>> >> >> The out param of ReadInt4() is 1.
>> >> >> calling CValidatePropertyUtil.ValidatePropertyInteger ().
>> >> >> Call to CValidatePropertyUtil.ValidatePropertyInteger () returned
> ok.
>> >> >> calling ReadBool (0x25b7e8, F71526DD-9C19-4fe9-B7DB-FD4360909275).
>> >> >> Call to ReadBool () returned ok.
>> >> >> The out param of ReadBool() is 1.
>> >> >> calling CValidatePropertyUtil.ValidatePropertyBool ().
>> >> >> Call to CValidatePropertyUtil.ValidatePropertyBool () returned ok.
>> >> >> calling ReadBool (0x25b7e8, DB5E5E46-3598-4F1D-8FF7-0ED35B9EB6A4).
>> >> >> Call to ReadBool () returned ok.
>> >> >> The out param of ReadBool() is 0.
>> >> >> calling CValidatePropertyUtil.ValidatePropertyBool ().
>> >> >> Call to CValidatePropertyUtil.ValidatePropertyBool () returned ok.
>> >> >> calling ReadBool (0x25b7e8, 1DB7A50F-98F8-452f-868B-1AAC56585DD0).
>> >> >> Call to ReadBool () returned ok.
>> >> >> The out param of ReadBool() is 1.
>> >> >> calling CValidatePropertyUtil.ValidatePropertyBool ().
>> >> >> Call to CValidatePropertyUtil.ValidatePropertyBool () returned ok.
>> >> >> calling ReadInt4 (0x25b7e8, C9D8697B-0D4C-4767-8F1F-4CE415098774).
>> >> >> Call to ReadInt4 () returned ok.
>> >> >> The out param of ReadInt4() is 0x2.
>> >> >> calling CValidatePropertyUtil.ValidatePropertyLong ().
>> >> >> Call to CValidatePropertyUtil.ValidatePropertyLong () returned ok.
>> >> >> calling ReadString (0x25b7e8,
>> >> >> 01637C90-B142-41C4-8520-6B2E0F891BE7).
>> >> >> Call to ReadString () returned ok.
>> >> >> The out param of ReadString() is microtekstl.com.
>> >> >> calling ReadBool (0x25b7e8, 1DB7A50F-98F8-452f-868B-1AAC56585DD0).
>> >> >> Call to ReadBool () returned ok.
>> >> >> The out param of ReadBool() is 1.
>> >> >> calling ReadInt4 (0x25b7e8, C9D8697B-0D4C-4767-8F1F-4CE415098774).
>> >> >> Call to ReadInt4 () returned ok.
>> >> >> The out param of ReadInt4() is 0x2.
>> >> >> calling CValidatePropertyUtil.ValidatePropertyHostName ().
>> >> >> Call to CValidatePropertyUtil.ValidatePropertyHostName () returned
> ok.
>> >> >> calling AttachCommiter.Validate(pPPPBag) (0x25b7e8,
>> >> >> 01637C90-B142-41C4-8520-6B2E0F891BE7).
>> >> >> calling CAttachCommiter::Validate (0x25b7e8).
>> >> >> calling CAttachCommiter::Validate:ReadVariant (0x0).
>> >> >> calling CAttachCommiter::Validate:m_spDoc.CoCreateInstance (0x0).
>> >> >> calling CAttachCommiter::Validate:m_spDoc->loadXML (0x0).
>> >> >> Call to CAttachCommiter::Validate () returned ok.
>> >> >> Call to CEMailCommit::ValidatePropertyBag () returned ok.
>> >> >> calling CNetCommit::Commit (2471912).
>> >> >> calling CNetCommit::ValidatePropertyBag ().
>> >> >> Call to Querying for the property bag () returned ok.
>> >> >> Property bag is not dirty, skipping validation
>> >> >> calling CNetCommit::Common ().
>> >> >> calling CNetCommit::GetLanNicInfo ().
>> >> >> LAN NIC Guid: {DEABD7B4-E355-404F-B3F9-17E5C44EBADA}
>> >> >> Call to Converting LAN NIC Guid () returned ok.
>> >> >> Call to Getting IP address for the LAN NIC () returned ok.
>> >> >> Call to Reading in the LAN NIC info () returned ok.
>> >> >> Call to Fixing the TCP/IP NIC Binding order () returned ok.
>> >> >> DNS server is installed and not disabled
>> >> >> Call to Changing startup type for DNS () returned ok.
>> >> >> Call to Clearing DNS server entries on the LAN NIC () returned ok.
>> >> >> Call to Setting DNS server IP for the LAN NIC () returned ok.
>> >> >> Call to Resetting DNS recursion timeout () returned ok.
>> >> >> Call to Resetting client dns query timouts in config.dat ()
>> >> >> returned
>> > ok.
>> >> >> Call to DsGetDcName for local domain name () returned ok.
>> >> >> calling CNetCommit::DoRouter ().
>> >> >> Call to Converting external NIC guid () returned ok.
>> >> >> Call to Clearing the default gateway on the LAN NIC () returned ok.
>> >> >> Call to Clearing the default gateway on the external NIC ()
>> >> >> returned
>> > ok.
>> >> >> Call to Setting default gateway on the external NIC () returned ok.
>> >> >> Call to Setting DNS forwarders () returned ok.
>> >> >> Call to Clearing DNS servers on the external NIC () returned ok.
>> >> >> Call to Making sure external NIC points to the local DNS server ()
>> >> > returned
>> >> >> ok.
>> >> >> Call to GetLocalDomainName () returned ok.
>> >> >> Call to Deleting the DNS record for the external NIC () returned
>> >> >> ok.
>> >> >> Call to Preparing DNS for DNS listener reset () returned ok.
>> >> >> Call to Resetting DNS listeners () returned ok.
>> >> >> Call to Disabling dns registration on the external NIC () returned
> ok.
>> >> >> Call to Disabling services on the external NIC () returned ok.
>> >> >> Call to Disabling NetBIOS for the external NIC () returned ok.
>> >> >> URL to the router is http://192.168.1.1
>> >> >> Call to Adding routers IP address to the intranet zone () returned
> ok.
>> >> >> Call to CNetCommit::DoRouter () returned ok.
>> >> >> Call to Configuring for router connection () returned ok.
>> >> >> calling ConfigureIE ().
>> >> >> calling SetInternetOptions ((null), MICROTEK-WEB:8080, <local>).
>> >> >> calling InternetSetOptionA (NULL,
>> > INTERNET_OPTION_PER_CONNECTION_OPTION).
>> >> >> Call to InternetSetOptionA () returned ok.
>> >> >> Call to SetInternetOptions () returned ok.
>> >> >> calling InternetSetOption_AutodialConnection ().
>> >> >> Call to InternetSetOption_AutodialConnection () returned ok.
>> >> >> calling InternetSetOption_AutodialMode (1).
>> >> >> Call to InternetSetOption_AutodialMode () returned ok.
>> >> >> calling InternetSetOption_DisableAutodial (1).
>> >> >> Call to InternetSetOption_DisableAutodial () returned ok.
>> >> >> Call to ConfigureIE () returned ok.
>> >> >> Call to Configuring IE for router connection () returned ok.
>> >> >> Call to Notifying client setup for Default gateway as the SBS
>> >> >> server
>> >> >> ()
>> >> >> returned ok.
>> >> >> Call to Initializing the Stingray util () returned ok.
>> >> >> Call to Turning Stingray autodial off () returned ok.
>> >> >> ISA2k Autodial rule does not exist, ignoring the error
>> >> >> Call to CNetCommit::RemoveISA2kAutodialRule () returned ok.
>> >> >> Call to Removing ISA autodial rule ROUTINGRULE_AUTODIAL () returned
>> >> >> ok.
>> >> >> ISA2k Autodial rule does not exist, ignoring the error
>> >> >> Call to CNetCommit::RemoveISA2kAutodialRule () returned ok.
>> >> >> Call to Removing ISA autodial rule ROUTINGRULE_INTERNALAUTODIAL ()
>> >> > returned
>> >> >> ok.
>> >> >> Call to CNetCommit::RemoveISA2kRelatedAutodialRules () returned ok.
>> >> >> Call to Removing ISA2k related autodial rules () returned ok.
>> >> >> calling RegisterMSBOExchangeBP (0).
>> >> >> Error 0x1 returned from call to RegisterMSBOExchangeBP().
>> >> >> Call to Unregistering the smtp sink () returned ok.
>> >> >> Call to Initializing the Stingray util in CreateLANAccessRule ()
>> > returned
>> >> >> ok.
>> >> >> Call to Creating the protected networks access rule () returned ok.
>> >> >> Call to Saving ISA2k4 changes () returned ok.
>> >> >> Call to GetLocalDomainName () returned ok.
>> >> >> Call to Reading in the local domain name () returned ok.
>> >> >> Local Domain Name is: Microtekstl.local
>> >> >> Call to Enabling secure dynamic DNS updates () returned ok.
>> >> >> Call to Disabling RoundRobin for DNS server () returned ok.
>> >> >> Call to Disabling the RASUTO service () returned ok.
>> >> >> Call to Configuring w32time parameters for fulltime () returned ok.
>> >> >> Call to Configuring the time service () returned ok.
>> >> >> Call to Notifying RWW for ISA () returned ok.
>> >> >> Call to CNetCommit::Common () returned ok.
>> >> >> Call to CNetCommit::Commit () returned ok.
>> >> >> CStingrayCommit::CommitEx
>> >> >> CStingrayCommit::ValidatePropertyBag
>> >> >> Call to Querying for IPropertyPagePropertyBag () returned ok.
>> >> >> Call to Initializing the StringrayUtil () returned ok.
>> >> >> Call to Reading the firewall selection () returned ok.
>> >> >> Firewall selection: 1
>> >> >> CStingrayCommit::ValidateUpnpProperties
>> >> >> Call to Reading the UPNP selection () returned ok.
>> >> >> Skipping upnp validation
>> >> >> Call to CStingrayCommit::ValidateUpnpProperties () returned ok.
>> >> >> Call to Validating Upnp properties () returned ok.
>> >> >> CStingrayCommit::ValidatePortMappings
>> >> >> Call to Reading the port mappings () returned ok.
>> >> >> Call to Loading port mappings XML () returned ok.
>> >> >> Call to Validating the predefined port mappings XML () returned ok.
>> >> >> Call to Reading the custom port mappings () returned ok.
>> >> >> Loading port mapping XML
>> >> >> Call to Validating the custom port mappings XML () returned ok.
>> >> >> Call to CStingrayCommit::ValidatePortMappings () returned ok.
>> >> >> Call to Validating port mappings () returned ok.
>> >> >> CStingrayCommit::ValidateWebPublishingRules
>> >> >> Call to Reading web publishing selection () returned ok.
>> >> >> Call to CStingrayCommit::ValidateWebPublishingRules () returned ok.
>> >> >> Call to Validating web publishing rules () returned ok.
>> >> >> Call to CStingrayCommit::ValidatePropertyBag () returned ok.
>> >> >> Call to Validating the property bag () returned ok.
>> >> >> Call to Reading the guid for the LAN NIC () returned ok.
>> >> >> Call to Getting the IP address for the LAN NIC () returned ok.
>> >> >> Call to Getting the SM for the LAN NIC () returned ok.
>> >> >> LAN NIC Info:
>> >> >> Guid: {DEABD7B4-E355-404F-B3F9-17E5C44EBADA}
>> >> >> IP: 192.168.0.24
>> >> >> SM: 255.255.255.0
>> >> >> Call to Removing RRAS NAT () returned ok.
>> >> >> CStingrayCommit::DoGeneralConfiguration
>> >> >> Call to Removing SBS access rules () returned ok.
>> >> >> Call to SBS MS Update Access Rule () returned ok.
>> >> >> Call to Creating SBS Internet Access Rule () returned ok.
>> >> >> Call to Setting default logon domain for OMA () returned ok.
>> >> >> Error 0x80070057 returned from call to Configuring anonymous access
>> >> >> for
>> >> > SBS
>> >> >> dirs().
>> >> >> Error 0x80070057 returned from call to
>> >> >> CStingrayCommit::DoGeneralConfiguration().
>> >> >> Error 0x80070057 returned from call to Doing general
> configuration().
>> >> >> Error 0x80070057 returned from call to CStingrayCommit::CommitEx().
>> >> >> calling GetBOConnector ().
>> >> >> Call to GetBOConnector () returned ok.
>> >> >> calling spADs->PutEx (ADS_PROPERTY_CLEAR,
>> >> >> msExchSmtpOutboundSecurityPassword).
>> >> >> Call to spADs->PutEx () returned ok.
>> >> >> calling spADs->SetInfo ().
>> >> >> Call to spADs->SetInfo () returned ok.
>> >> >>
>> >> >> Anyone have any idea what I can do to fix this?
>> >> >>
>> >> >> Thanks
>> >> >> Bob
>> >> >>
>> >> >>
>> >> >
>> >> >
>> >>
>> >>
>> >
>> >
>>
>>
>
>


.

Relevant Pages

  • Re: Linksys WMCE54AG "Could not connect to Wireless Network"
    ... > My WAP is a Dell 2350 B/G router. ... I tried disabling WPA...no luck. ... >>> It is a Linksys WMCE54AG router, ...
    (microsoft.public.windows.mediacenter)
  • Re: Out but not In!!
    ... Wow, thanks Bob, ... You likely will need to setup your new ADSL router. ... > Since most Exchange servers either route via DNS or to a smarthost, ... > 192.168.10.10 for your Exchange server. ...
    (microsoft.public.exchange.connectivity)
  • Re: Two error messages
    ... >>> Bob, ... >>> visible in Network Neighborhood, ... >>router and I entered the IP static address assigned to me by my ISP. ... got rid of the IP error message. ...
    (microsoft.public.windowsxp.network_web)
  • Re: Cant connect to server or client
    ... I must have allowed CEICW to use the PnP of the router. ... But the remote Trend install is still not working. ... Hi Bob, ... Did you also forward port 4125 from the router to your external nic IP? ...
    (microsoft.public.windows.server.sbs)
  • Re: Personal Information on someone elses webpage
    ... broadband connection or a dsl connection you should invest in a linksys ... Bob Smith ... >>Is all the info on a certin website, ... > under a ISP server, ...
    (microsoft.public.security)