Re: Lan setup 2 nic

Hi Marina

I am pasting the IP config info below some of the names and ip info have
been changed to protect the connection... I have looked at your website as
Frank McCallister suggested and followed your instructions on the 2 nic no
router config setup but I still can't get it to work. Now when I go to the
internet connection wizard, it proceeds correctly until the web services
configuration, it is not showing any web services such as remote web
workplace, etc. so cannot proceed past that point.

I also note that in the bindings, there is no stand alone TCP/IP binding for
the external connection, only in conjunction with Client for Microsoft
Networks

SBS 2003 Server IP Configuration

Host Name . . . . . . . . . . . . : romanholiday
Primary Dns Suffix . . . . . . . : romanfun.local
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : Yes
WINS Proxy Enabled. . . . . . . . : Yes
DNS Suffix Search List. . . . . . : romanfun.local

Ethernet adapter Server Local Area Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Linksys LNE100TX Fast Ethernet
Adapter(LN
E100TX v4)
Physical Address. . . . . . . . . : 00-0C-41-F1-46-6A
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.0.10
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
DNS Servers . . . . . . . . . . . : 192.168.0.10
Primary WINS Server . . . . . . . : 192.168.0.10

Ethernet adapter WAN Connection:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) PRO/1000 MT Network Connection
Physical Address. . . . . . . . . : 00-0C-F1-CA-6A-8D
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 66.159.241.104
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 66.159.241.1
DNS Servers . . . . . . . . . . . : 192.168.0.10
Primary WINS Server . . . . . . . : 192.168.0.10


Windows XP workstation IP Configuration

Host Name . . . . . . . . . . . . : rosy
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : romanfun.local

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix . : romanfun.local
Description . . . . . . . . . . . : CNet PRO200WL PCI Fast Ethernet
Adap
ter
Physical Address. . . . . . . . . : 00-08-A1-0A-5F-86
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.0.2
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.0.10
DHCP Server . . . . . . . . . . . : 192.168.0.10
DNS Servers . . . . . . . . . . . : 192.168.0.10
Primary WINS Server . . . . . . . : 192.168.0.10
Lease Obtained. . . . . . . . . . : Saturday, June 25, 2005 4:53:40 PM
Lease Expires . . . . . . . . . . : Sunday, July 03, 2005 4:53:40 PM

any help is much apreciated.
Thanks,
RD

"Marina Roos [SBS-MVP]" wrote:

> Can you post the ipconfig/all from the server and one from a client?
>
> --
> Regards,
>
> Marina Roos
> Microsoft SBS-MVP
> One of the Magical M&M's
> www.smallbizserver.net
> Take part in SBS forum:
> http://www.smallbizserver.net/Default.aspx?tabid=53
>
> "RD Wirr" <RDWirr@xxxxxxxxxxxxxxxxxxxxxxxxx> schreef in bericht
> news:B151DC9B-974E-4A00-9240-7AB6CEB4FD16@xxxxxxxxxxxxxxxx
> > Yes Greg, I have connected all clients and the server to the switch ports.
> > The WAN port is empty. I should mention though, that the router setup is
> > still acting as though it is ready to connect with the WAN. I can see no
> way
> > the disable the WAN connection setup (dynamic IP, PPoE, LPT2, etc) but I
> have
> > disabled the DHCP service and the DNS relaying in the router. I guess the
> > other WAN setup items just become irrelevant nif there is nothing
> connected
> > to the WAN physical port.
> >
> > "Gregg Hill" wrote:
> >
> > > Did you connect the server and clients to the router's switch ports, or
> did
> > > you connect the server to the router's WAN port? They should all be on
> the
> > > switch ports.
> > >
> > > If you have the server connected to the WAN port, the clients would be
> > > behind the firewall, just as though the server were an Internet computer
> > > trying to attack them via the WAN port.
> > >
> > > Gregg Hill
> > >
> > >
> > >
> > > "RD Wirr" <RDWirr@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
> > > news:BEFB93A1-9C9A-40D2-927D-304D7744F89C@xxxxxxxxxxxxxxxx
> > > >I am trying to change from a single nic internet/lan setup on sbs 2003
> to a
> > > > two nic setup directly connecting to a dsl modem from the server,
> using
> > > > the
> > > > SBS firewall (standard version) and then using the existing router
> just as
> > > > a
> > > > switch for connecting to the internal network. I have made the
> changeover
> > > > almost without problems, I can get to the internet from the server and
> the
> > > > clients and can connect to the server from the clients however the
> clients
> > > > are invisible from the server. I have tried repairing the connection
> on
> > > > the
> > > > server but I always get an error message saying "failed to flush ARP
> > > > cache".
> > > > I have installed the DHCP service on the server and also the DNS on
> the
> > > > server (disabled on the router). I am using the same IP as the server
> > > > address
> > > > for the DHCP, DNS servers and also for the gateway settings on the
> > > > clients.
> > > > Anyone have any idea what I am doing wrong here?
> > > > Thanks in advance RD Wirr
> > >
> > >
> > >
>
>
>
.

Relevant Pages

  • Re: Still cant connect to RWW or OWA remotely
    ... the router. ... match the broadband connection, the two NIC firewall, the remote ... Windows IP Configuration ... Ethernet adapter Server Local Area Connection: ...
    (microsoft.public.windows.server.sbs)
  • Re: Outgoing POP3 email missing/lost/not received
    ... SUMMARY OF SETTINGS FOR CONFIGURE E-MAIL AND INTERNET ... Internet Connection Wizard. ... NETWORKING CONFIGURATION SUMMARY ... Alternate DNS server: 209.165.254.12 ...
    (microsoft.public.windows.server.sbs)
  • Re: Help - Stalled Swing Migration
    ... I have cleared out the event logs and rebooted. ... Check the database connection and make sure the database is running. ... The DHCP Server has detected that it is running on a DC and has no credentials ... configuration settings you have specified when running the CEICW. ...
    (microsoft.public.windows.server.sbs)
  • RE: Error configuring CEICW (newbie user)
    ... On the Connection Type page, click Broadband, and then click Next. ... next to Preferred DNS server and next to ... configuration settings for an existing firewall device. ... If you still get error when run CEICW, ...
    (microsoft.public.windows.server.sbs)
  • Re: Help - Stalled Swing Migration
    ... frustrating because the server is otherwise behaving correctly. ... I have cleared out the event logs and rebooted. ... configuration settings you have specified when running the CEICW. ... Ethernet adapter Server WAN Connection: ...
    (microsoft.public.windows.server.sbs)