Re: ISA 2004 did not install MSDE SP4



Yes, we have that folder.

Two pieces of information that may be relevant: 1) I installed this server
about 1 month before SP1 came out. My practice is to fully patch a new
install so SQL and all MSDE instances were patched to SP4 BEFORE SP1 was
released (I didn't go through any SQL install from the SBS SP1 CDs) and 2) I
installed ISA 2004 to E:\Program Files\ISA Server rather than the default
location.

Thanks, I'm here at the office trying to fix this so your help is MUCH
appreciated.

John

"Marina Roos [SBS-MVP]" <marina@xxxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:uDGbKhbeFHA.2984@xxxxxxxxxxxxxxxxxxxxxxx
> Hi,
>
> That error 0x80070002 usually points to a file not found. I have no clue
> however which file exactly it is looking for at this point. Do you have
> the
> \program files\microsoft SQL Server SP4\MSDE folder?
>
> --
> Regards,
>
> Marina Roos
> Microsoft SBS-MVP
> One of the Magical M&M's
> www.smallbizserver.net
> Take part in SBS forum:
> http://www.smallbizserver.net/Default.aspx?tabid=53
>
> "JML" <nospam@xxxxxxxxxxxxx> schreef in bericht
> news:uxHnZQbeFHA.2128@xxxxxxxxxxxxxxxxxxxxxxx
>> No. SBS2003 SP1 was successful. MBSA is reporting that the MSFW instance
> is
>> at SP3, Monitoring is at SP4. When you referred to monitoring, I thought
> you
>> were referring to the MSFW instance. My bad. All MSDE instances are at
>> SP4
>> except MSFW.
>>
>> Thanks
>>
>> John
>> "Marina Roos [SBS-MVP]" <marina@xxxxxxxxxxxxxxxxxxxxxxxxxx> wrote in
> message
>> news:eKhu%231ZeFHA.2124@xxxxxxxxxxxxxxxxxxxxxxx
>> > If MBSA is reporting that the Monitoring instance is also still on SP3,
>> > your
>> > SBS 2003 SP1 install failed. Did you rename the Sharepoint instance?
>> > Can
>> > you
>> > look in the kb885918 log file in \Windows and see which error lines you
>> > have?
>> >
>> > --
>> > Regards,
>> >
>> > Marina Roos
>> > Microsoft SBS-MVP
>> > One of the Magical M&M's
>> > www.smallbizserver.net
>> > Take part in SBS forum:
>> > http://www.smallbizserver.net/Default.aspx?tabid=53
>> >
>> > "JML" <nospam@xxxxxxxxxxxxx> schreef in bericht
>> > news:eQ0B8xZeFHA.1448@xxxxxxxxxxxxxxxxxxxxxxx
>> >> I have no idea how to determine whether the monitoring instance
>> >> reports
>> > SP4.
>> >> I suppose it's some osql command but that's beyond my experience so
> far.
>> > :)
>> >> However, as noted, MBSA reports it as SP3 and I got the error message
>> >> that
>> >> ISA setup could not install SP4.
>> >>
>> >> Here is the portion of the sbsisa2k4setup.log file referring to MSDE
> SP4:
>> >>
>> >> SBSISA2K4POSTSETUP: LaunchICW returned OK
>> >> SBSISA2K4POSTSETUP: Launching CEICW returned OK
>> >> SBSISA2K4POSTSETUP: Reading ICW_RUN_REGKEY_VALUE returned OK
>> >> SBSISA2K4SETUP: WaitingForMultipleObjects returned OK
>> >> SBSISA2K4SETUP: LaunchISA2k4NativeSetup returned OK
>> >> SBSISA2K4SETUP: Running ISA2k4 setup unattended returned OK
>> >> SBSISA2K4SETUP: Entering IsISA2k4Installed
>> >> IsISA2k4Installed returned TRUE
>> >> SBSISA2K4SETUP: Entering LaunchMsdeSp4
>> >> SBSISA2K4SETUP: *** LaunchMSDESP4 returned ERROR 0x80070002
>> >> SBSISA2K4SETUP: *** Running MSDE SP4 setup unattended returned ERROR
>> >> 0x80070002
>> >> SBSISA2K4SETUP: MSDE SP4 failed. Setting property to signal user of
>> > failure.
>> >> SBSISA2K4SETUP: WriteBool( GUID_PROPERTY_MSDE_INSTALL_FAILED, TRUE )
>> >> returned OK
>> >> SBSISA2K4SETUP: CSbsIsa2k4SetupCommit::CommitEx returned OK
>> >> SBSISA2K4SETUP: CommitEx returned OK
>> >> SBSISA2K4SETUP: Marking committer succeeded.
>> >> SBSISA2K4SETUP: Reading MSDE Failed property returned OK
>> >> SBSISA2K4SETUP: Warning the user that MSDE SP4 installation failed.
>> >> SBSISA2K4SETUP: Waiting for the user to dismiss the status dialog
>> >> SBSISA2K4SETUP: Commit returned OK
>> >> SBSISA2K4SETUP: Commit returned OK
>> >> SBSISA2K4SETUP: Prompting user for a reboot
>> >> SBSISA2K4SETUP: Setting the event to signal post setup
>> >> SBSISA2K4SETUP: InstallISA2k4 returned OK
>> >> SBSISA2K4SETUP: Installing ISA2k4 returned OK
>> >> SBSISA2K4SETUP: Exiting
>> >>
>> >> Thanks!
>> >>
>> >> "Marina Roos [SBS-MVP]" <marina@xxxxxxxxxxxxxxxxxxxxxxxxxx> wrote in
>> > message
>> >> news:e3tJfnXeFHA.2700@xxxxxxxxxxxxxxxxxxxxxxx
>> >> > Hi,
>> >> >
>> >> > Does the monitoring instance report SP4? If yes, can you check the
>> >> > sbsisa2k3setup.log for error lines?
>> >> >
>> >> > --
>> >> > Regards,
>> >> >
>> >> > Marina Roos
>> >> > Microsoft SBS-MVP
>> >> > One of the Magical M&M's
>> >> > www.smallbizserver.net
>> >> > Take part in SBS forum:
>> >> > http://www.smallbizserver.net/Default.aspx?tabid=53
>> >> >
>> >> > "JML" <nospam@xxxxxxxxxxxxx> schreef in bericht
>> >> > news:ekcl8dUeFHA.3012@xxxxxxxxxxxxxxxxxxxxxxx
>> >> >> Just completed another sucessful install of SBS SP1. Almost.
>> >> >> Everything
>> >> > went
>> >> >> without a hitch except for ISA 2004 which gave me the message: "
> MSDE
>> >> >> 2000
>> >> >> Service Pack 4 did not install. For additional instructions, see
>> >> >> the
>> > SQL
>> >> >> Server 2000 Service Pack Web site at
>> >> >> http://go.microsoft.com/fwlink/?LinkId=46241.";
>> >> >>
>> >> >> ISA and everything else seems to work fine.
>> >> >>
>> >> >> MBSA says that the MSFW instance is at SP3.
>> >> >>
>> >> >> I have not had success doing a repair installation of ISA, an
> upgrade
>> > of
>> >> > the
>> >> >> MSDE instance from the downloaded file for MSDE SP4, or from Disk3
> of
>> > the
>> >> >> SBS SP1 install CDs.
>> >> >>
>> >> >> Help.
>> >> >>
>> >> >> John
>> >> >>
>> >> >>
>> >> >>
>> >> >
>> >> >
>> >>
>> >>
>> >
>> >
>>
>>
>
>


.



Relevant Pages

  • RE: Webparts error after sp1 install
    ... SBS 2k3 Premium ... server set up to install the intranet. ... server prompted me that the version needed upgradeing to sp1 level. ...
    (microsoft.public.windows.server.sbs)
  • Re: Error installing VPN on SBS 2003 SP1
    ... When running winver I get a pretty Small Business Server Box with the ... I had assumed that SP1 was installed. ... I am now starting to really wonder if SP1 has been installed on our SBS ... To resolve the issues, install SBS 2003 SP1. ...
    (microsoft.public.windows.server.sbs)
  • Re: Cannot activate SBS 2003 SP2
    ... PCie card - sp1 slipstream is fine and gets all the way through so its a ... the arcane worls of MS Server stuff. ... other persons SP1 or SP2? ... My main reason for slipstreaming the install is because I cannot get ...
    (microsoft.public.windows.server.sbs)
  • RE: SBS 2003 CompanyWeb install restore
    ... Select Windows Small Business Server 2003 and then click Change/Remove. ... select Microsoft SQL Server Desktop Engine ... If AV software install any extra IIS web site in IIS, ... Location of the MSSQL$SHAREPOINT folder is determined by ...
    (microsoft.public.windows.server.sbs)
  • RE: Companyweb errors
    ... right click Companyweb to choose Properties, ... > point the SBS Integrated setup program to the folder for the 'SP1 CD3' ... > 829114 How to remove and how to install the Windows Small Business Server ...
    (microsoft.public.windows.server.sbs)