Re: SBS2003 Clients will not remote

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

Hi Bitbob,

50, 500, 4500 and 80??? Where do you need those for?

--
Regards,

Marina Roos
Microsoft SBS-MVP
One of the Magical M&M's
www.smallbizserver.net
Take part in SBS forum:
http://www.smallbizserver.net/Default.aspx?tabid=53

"Bitbob" <Bitbob@xxxxxxxxxxxxxxxxxxxxxxxxx> schreef in bericht
news:BE672A8A-DC52-4796-B7B8-921DE211BA88@xxxxxxxxxxxxxxxx
> Marina: Sorry forgot to mention the following ports have been forwarded
> through the hardware firewall ,444,25,50,500,4500,80,1723,3389,4125,and
443
> to the external nic.
>
> "Marina Roos [SBS-MVP]" wrote:
>
> > Hi Bitbob,
> >
> > Of course the machines will have to be turned on ;-)
> > Did you also forward port 4125 from the router to the external nic IP?
Does
> > it work from inside the lan (rdp-ing to another client)?
> >
> > --
> > Regards,
> >
> > Marina Roos
> > Microsoft SBS-MVP
> > One of the Magical M&M's
> > www.smallbizserver.net
> > Take part in SBS forum:
> > http://www.smallbizserver.net/Default.aspx?tabid=53
> >
> > "Bitbob" <Bitbob@xxxxxxxxxxxxxxxxxxxxxxxxx> schreef in bericht
> > news:A42CE194-271A-41A1-B267-C501F55025C2@xxxxxxxxxxxxxxxx
> > > I have an installation of sbs2003 w/sp1 and ISA4 installed behind a
> > hardware
> > > firewall. All the pertinent ports have been forwarded and remote
desktop
> > is
> > > set up on clients and users added to remote list. I have no trouble
> > setting
> > > up rww from remote laptop and accessing outlook or websight or
contolling
> > > server, but when I try to access clients which show on rww desktop as
> > choices
> > > they just time out and will not connect. Do the clients have to be in
any
> > > particular state before remote controll is allowed? Any help
appreciated
> >
> >
> >


.

Relevant Pages

  • Re: TAPI and a firewall
    ... Try running netstat on the server and the clients to see what ports try to ... > I will try contacting Avaya - unfortunately I know what that is like! ... >> Are the clients using MS's remote TSP? ... I don't know which ports MS' ...
    (microsoft.public.win32.programmer.tapi)
  • Re: Other remote control solutions?
    ... ability to open and forward ports on your PC (not your clients). ... I used the RemoteOffice and designed my own UI for the customer (the UI ... *they* connect to me and therefore control my remote access to them. ...
    (borland.public.delphi.thirdpartytools.general)
  • Whos blocking these ports? Please help...
    ... server - one is called Vicomsoft Internet Gateway (proxy server, ... IG basically takes over the TCP/IP routing and does this using ... Each of these ports uses a NIC in the server. ... All the clients are assigned IPs ...
    (microsoft.public.win2000.security)
  • Re: Firewall advice
    ... > The VPN will only way for outside users to connect. ... old ipchains you'd be allowing inbound on the unpriv'd ports anyway. ... You'll need to let 3389 in from the PPTP sessions. ... IP's if only a few clients) to route through. ...
    (comp.security.firewalls)
  • Re: Open Ports
    ... want the ports open even ifs all in house and behind the hardware firewall??? ... it opens up in demo mode. ... server is Cisco Catalyst Express 500 switches for voice over IP. ... will take requests from the clients. ...
    (microsoft.public.windows.server.general)