RE: Event ID 32003 - Nat no longer working

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

Hi Lan,

Thanks for posting here.

>From your description, I understand that you can not access internet ADSL
modem crashed. If I am off base, please don't hesitate to let me know.

Please try follow suggestions in turn till the issue be resolved.

1. At first I suggest you rerun CEICW. Please follow the guide of the
following link to configure your network access properly.

How to configure Internet access in Windows Small Business Server 2003
http://support.microsoft.com/default.aspx?scid=kb;en-us;825763

2. Since the problem occurs after an ADSL modem crash. Please replace a
modem and have a test. (if possible).

3. This problem can occur if there is a custom filter configured under NAT
Basic Firewall in RRAS and the filter conflicts with an existing port/IP
address configuration.

To resolve this issue, re-configure the custom filter with a different port
and/or IP address.

Please follow the steps to reconfigure the custom filter to resolve the
issue.

1). Start the Routing and Remote Access snap-in in MMC.
2). In the left pane, click NAT/Basic Firewall under the IP Routing node.
3). In the right pane, right-click the adapter that has been configured as
the external adapter, and then click Properties.
4). please check the filter configuration and change properly.

*Note: have you installed ISA? For your description, I think you haven't
installed. If you installed ISA, you will not see NAT/Basic Firewall under
the IP Routing node.

4. If problem is not resolved at this time, I suggest you do the following:

1). Reset TCP/IP
a. Click "Start", and then click "Run".
b. In the "Open" box, type " netsh int reset all " (without the quotation
marks), and then click "OK".

2). Reinstall NIC

Then restart computer and check again.

3). Rerun CEICW

I am currently standing by for an update from you and would like to know
how things are going on your end.

Have a nice day!

Best Regards,
Jenny Wu
Microsoft Windows Online Support


.

Relevant Pages

  • RE: Event ID 32003 - Nat no longer working
    ... Since the problem occurs after an ADSL modem crash. ... This problem can occur if there is a custom filter configured under NAT ... > To resolve this issue, re-configure the custom filter with a different port ... please check the filter configuration and change properly. ...
    (microsoft.public.windows.server.sbs)
  • RE: SBS 2003 Fax Service - Cant "Pause Printing" and ...
    ... I'm glad we resolve the outbound fax always go through one modem issue. ... Now, you get error when you try to stop fax from Server Management console, ... Gather MPS network report on SBS: ...
    (microsoft.public.windows.server.sbs)
  • Re: USR 5699B Win Modem and W2K Power Users not happy
    ... Did you ever resolve this problem? ... thing with a very similar set up but with a guest account (I am only ... > will occasionally return an error saying that the modem is=20 ... > directory level to give all power users full controll of=20 ...
    (microsoft.public.win2000.hardware)
  • Re: k key on keyboard malfunctioning
    ... Recently a friend of mine had a key problem with her new HP laptop, ... When modem properties  was checked, it was said to be working ... lots of customer service people will tell the customer to format ... if this had something to do with the registry to resolve by itself? ...
    (comp.sys.laptops)
  • RE: Code 80072EE2 (SP2 Installation Failure)
    ... but gave me an error with windows update with the above ... to resolve the issue. ... I gathered the information for the modem ... I set the MTU rate on the other modem to 1400 and now both modems work fine ...
    (microsoft.public.windowsupdate)