SBS two adapter setup with Netopia Router. Help Save my weeked
- From: "Wildwilly" <fonger101@xxxxxxx>
- Date: Fri, 27 May 2005 20:06:42 -0400
I am trying to go to a two adapter set up for the SBS server. I have Read
and reread KB Aricle 825763 How to configure Internte access and I try to
follow it by the numbers. I still cannot make it work. I am sure I am too
involved to see some small setting I have wrong.
My server can access the internet.and the company web. I can remote
workplace from my workstation to the server and run the server. The server
can see my workstation but the only files visible are the Symantec VPHOME
and VP Login, printers and faxes, and scheduled tasks. Cannot see the hard
drive
My workstation cannot access the internet, Cannot send Outlook 2003 Mail.
I am convinced one of the network or router cards is misconfigued.
SBS 2003 Intel Pro 1000 MT card, and a dual Intel Pro 1000 MT card.
DSL Ethernet Switch is Netopia( Cayman) 3346 with 4 ports.
Linksys 16 Port Dual Speed hub.
BellSouth DSL 3Mb service
LAN- side network card
IP X.X.X.9, Subnet 255.255.255.0
Default Gateway is blank
DNS use the LAN IP address of the server x.x.x.9
DNS tab Append primary and connection specific DNS suffixes
Append parent suffixes of the primary DNS sufix
Reister this connection's addresses in DNS
Wins Tab enable LMHOSTs lookup
Enable Net Bios over TCP/IP
Second Network adapter
WAN- side network card LAN IP X.X.X .45, Per article insturctions. "Type
the static IP address that is providedby your ISP,
or the IP you want to use." When using a router should it be the LAN
Side IP or the fixed WAN IP address of the router. Using the Fixed WAN IP
you get an error message that they are on different subnets.
Subnet 255.255.255.0,
Default gateway the LAN IP of the Router X.X.X. 254,
DNS server the LAN IP of the Local Server X.X..X.9 ) Alternate DNS blank
(per article instructions)
WINS Tab of Advanced TCP/IP Enable LMHOSTS. Disable NetBIOS over TCP/IP
Netopia Settings
Status: UP
Local Address: Internet IP Y.Y.Y. 161 Peer addresses 68.152.252.185
Connection Type: always on
NAT : On
IP Address Lan IP X.X.X.254
Netmask: 255.255.255. 0
DHCP Server ON :
DNS-1 WAN IP X.X.X.X
DHCP Leases in use 2
DHCP Server ,
Server mode : Server (other choice is relay agent)
Starting and ending IP Addresses are with the LAN side subnet.
WAN IP interfaces
PPP over Ethernet vcc1
IP Gateway : Enable Gateway option
Interface type: PPP over Ethernet (vcc1) other option is IP address
Enable interface : checked
Adress Mapping (NAT) checked
ISP Usename: filled in
ISP Password : filled in
.
- Follow-Ups:
- Re: SBS two adapter setup with Netopia Router. Help Save my weeked
- From: SuperGumby [SBS MVP]
- Re: SBS two adapter setup with Netopia Router. Help Save my weeked
- Prev by Date: Re: Switches/Hub, Brand?
- Next by Date: Re: Symantec Firewall advice?
- Previous by thread: Service Pack 1 before and after
- Next by thread: Re: SBS two adapter setup with Netopia Router. Help Save my weeked
- Index(es):
Relevant Pages
|
