Re: keep on getting this error trying to connect to VPN

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance

I set up up the server as the DMZ on the router, connected immediately.

thnaks
"Leythos" <void@xxxxxxxxxxx> wrote in message
news:MPG.1cfcce9a778a4f1b9897fb@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> In article <Oe7Q6CCYFHA.3040@xxxxxxxxxxxxxxxxxxxx>,
> gabriel@xxxxxxxxxxxxxxxxxxxxx says...
>> Hi
>>
>> My router keeps on throwing this into the log file when I try to connect
>> by
>> VPN...
>>
>> On my machine is says Verifying username and password but then times out
>> with error code 721.
>>
>> GRE Protocol 47 is passed through by default on this router I am told.
>>
>> 2005-05-24 15:32:10 3389/TCP from 203.97.61.29:3273 to 219.89.82.242:3389
>> 3-Invalid TCP packet received, dropping packet
>>
>> I am using a WAG54G router and upgraded the firmware as well. VPN port is
>> forwarded on the router and I have no other problems with RWW etc....just
>> can not get the VPN pass through?
>
> If you check the vendors site, Linksys has a number of documents about
> inbound VPN pass through, which is NOT anything like outbound
> PASSTHROUGH.
>
> Most of the Linksys units require that you forward PORT 47 TCP/UDP (and
> yes, I know it's not a port) to the server directly.
>
> --
> --
> spam999free@xxxxxxxxxx
> remove 999 in order to email me


.

Relevant Pages

  • Re: Cost of setting up a network
    ... A router capable of acting as a VPN endpoint for more than one user simultaneously with four Ethernet ports or a switch to suit. ... The rationale for using a server here is basically that the router doesn't need to be able to decide which PC to route the connection to. ... If you are using a router which supports it, you can set up a port-forwarding inbound rule which also _translates_ the port supplied to the receiving port. ... You can use several of these connections to different machines simultaneously. ...
    (uk.comp.homebuilt)
  • Re: VPN Configuration
    ... them the internal IP address of the server and that you need 'PPTP VPN ... NOT a 'port', it is an IP protocol, Generic Routing Encapsulation ). ... accomplish configuring the router to forward port 1723 to the server? ...
    (microsoft.public.windows.server.sbs)
  • Re: Still cant connect to RWW or OWA remotely
    ... No Phantom NICs as far as I can see. ... that it can not find the server. ... Configure your Router as an Eithernet Bridge. ... Once you have this then configure the Routers Firewall and Port ...
    (microsoft.public.windows.server.sbs)
  • Re: Still cant connect to RWW or OWA remotely
    ... No Phantom NICs as far as I can see. ... that it can not find the server. ... Configure your Router as an Eithernet Bridge. ... Once you have this then configure the Routers Firewall and Port ...
    (microsoft.public.windows.server.sbs)
  • Re: VPN Configuration
    ... them the internal IP address of the server and that you need 'PPTP VPN ... NOT a 'port', it is an IP protocol, Generic Routing Encapsulation ). ... accomplish configuring the router to forward port 1723 to the server? ...
    (microsoft.public.windows.server.sbs)