Re: Was working fine, but now I can't connect to my router.

Tech-Archive recommends: Fix windows errors by optimizing your registry

Hi Greg,

What has POP3 got to do with forwarding 25 to your (new) external nic IP? If
you are retrieving with SMTP (which needs port 25), you don't use POP3
connector. Did you rerun CEICW? Yes, you were right on disabling DHCP on
that router. Make sure you forwarded the necessary ports in the router to
the external nic IP.

--
Regards,

Marina Roos
Microsoft SBS-MVP
One of the Magical M&M's
www.smallbizserver.net
Take part in SBS forum:
http://www.smallbizserver.net/Default.aspx?tabid=53

"GTP" <GTP@xxxxxxxxxxxxxxxxxxxxxxxxx> schreef in bericht
news:0670F43D-A625-4D88-94B6-C255FE4DF4B4@xxxxxxxxxxxxxxxx
> Hey Marina,
>
> I made up an IP for my external nic 192.168.0.60, set my sub to
> 255.255.255.0 and left my gateway the Router IP, 192.168.0.1, and
everything
> works fine, except, I can't receive my POP3 emails from my exchange. IU
get
> no errors, they just never come through.
>
> I made sure to go back to my router and port forward 25 to my ext nic IP.
> At the same time I turned off the DHCP in the router since now my SBS is
the
> dhcp, Right?
>
> Evertyting is configured correctly for my smtp virtual server, DNS porting
> to the ISP dns, MX and A created to ISP IP. Any ideas and was I correct in
> turning off DHCP on the router?
>
> Thanks,
> Greg
>
> "Marina Roos [SBS-MVP]" wrote:
>
> > Hi Greg,
> >
> > Because you are using a private IP on the external nic, you can make
those
> > IP's static.
> > Please change that and rerun CEICW.
> >
> > --
> > Regards,
> >
> > Marina Roos
> > Microsoft SBS-MVP
> > One of the Magical M&M's
> > www.smallbizserver.net
> > Take part in SBS forum:
> > http://www.smallbizserver.net/Default.aspx?tabid=53
> >
> > "GTP" <GTP@xxxxxxxxxxxxxxxxxxxxxxxxx> schreef in bericht
> > news:C5E90EE8-7F08-4BB1-8B8B-D2003825652E@xxxxxxxxxxxxxxxx
> > > Hi Marina,
> > >
> > > Client Side -
> > >
> > > Windows IP Configuration
> > >
> > > Host Name . . . . . . . . . . . . : gregpisano01
> > > Primary Dns Suffix . . . . . . . : CourageSafetySystems.local
> > > Node Type . . . . . . . . . . . . : Hybrid
> > > IP Routing Enabled. . . . . . . . : No
> > > WINS Proxy Enabled. . . . . . . . : No
> > > DNS Suffix Search List. . . . . . : CourageSafetySystems.local
> > >
> > > Ethernet adapter Local Area Connection:
> > >
> > > Connection-specific DNS Suffix . : CourageSafetySystems.local
> > > Description . . . . . . . . . . . : Broadcom 440x 10/100
> > Integrated
> > > Cont
> > > roller
> > > Physical Address. . . . . . . . . : 00-0D-56-69-7C-73
> > > Dhcp Enabled. . . . . . . . . . . : Yes
> > > Autoconfiguration Enabled . . . . : Yes
> > > IP Address. . . . . . . . . . . . : 192.168.16.15
> > > Subnet Mask . . . . . . . . . . . : 255.255.255.0
> > > Default Gateway . . . . . . . . . : 192.168.16.2
> > > DHCP Server . . . . . . . . . . . : 192.168.16.2
> > > DNS Servers . . . . . . . . . . . : 192.168.16.2
> > > Primary WINS Server . . . . . . . : 192.168.16.2
> > > Lease Obtained. . . . . . . . . . : Friday, May 20, 2005
6:59:09
> > AM
> > > Lease Expires . . . . . . . . . . : Saturday, May 28, 2005
6:59:09
> > AM
> > >
> > > Server:
> > >
> > > Windows IP Configuration
> > >
> > > Host Name . . . . . . . . . . . . : courage-qek7e1a
> > > Primary Dns Suffix . . . . . . . : CourageSafetySystems.local
> > > Node Type . . . . . . . . . . . . : Unknown
> > > IP Routing Enabled. . . . . . . . : Yes
> > > WINS Proxy Enabled. . . . . . . . : Yes
> > > DNS Suffix Search List. . . . . . : CourageSafetySystems.local
> > >
> > > Ethernet adapter Int Server Local Area Connection:
> > >
> > > Connection-specific DNS Suffix . :
> > > Description . . . . . . . . . . . : Intel(R) PRO/1000 CT Network
> > Connection
> > > Physical Address. . . . . . . . . : 00-C0-9F-39-CD-09
> > > DHCP Enabled. . . . . . . . . . . : No
> > > IP Address. . . . . . . . . . . . : 192.168.16.2
> > > Subnet Mask . . . . . . . . . . . : 255.255.255.0
> > > Default Gateway . . . . . . . . . :
> > > DNS Servers . . . . . . . . . . . : 192.168.16.2
> > > Primary WINS Server . . . . . . . : 192.168.16.2
> > >
> > > Ethernet adapter Ext Network Connection:
> > >
> > > Connection-specific DNS Suffix . :
> > > Description . . . . . . . . . . . : NETGEAR FA311/FA312 PCI Adapter
> > > Physical Address. . . . . . . . . : 00-09-5B-BD-DD-69
> > > DHCP Enabled. . . . . . . . . . . : Yes
> > > Autoconfiguration Enabled . . . . : Yes
> > > IP Address. . . . . . . . . . . . : 192.168.0.2
> > > Subnet Mask . . . . . . . . . . . : 255.255.255.0
> > > Default Gateway . . . . . . . . . : 192.168.0.1
> > > DHCP Server . . . . . . . . . . . : 192.168.0.1
> > > DNS Servers . . . . . . . . . . . : 192.168.16.2
> > > NetBIOS over Tcpip. . . . . . . . : Disabled
> > > Lease Obtained. . . . . . . . . . : Saturday, May 21, 2005 7:14:21
PM
> > > Lease Expires . . . . . . . . . . : Tuesday, May 24, 2005 7:14:21
PM
> > >
> > > I want to mention I got this working by disabling the "router and
remote
> > > access" and then re-enabling it, however this morning the clients did
not
> > > have internet, so I disabled the router and remote access again, this
time
> > I
> > > selected VPN and NAT, however I still can't receive emails from my pop
to
> > my
> > > exchange.
> > >
> > > Is it better just to remove the router in front of the external nic
and
> > let
> > > the SBS be the router?
> > >
> > > Thanks,
> > > Greg
> > >
> > > "Marina Roos [SBS-MVP]" wrote:
> > >
> > > > Hi GTP,
> > > >
> > > > Please post the ipconfig/all from the server and one from a client.
> > > >
> > > > --
> > > > Regards,
> > > >
> > > > Marina Roos
> > > > Microsoft SBS-MVP
> > > > One of the Magical M&M's
> > > > www.smallbizserver.net
> > > > Take part in SBS forum:
> > > > http://www.smallbizserver.net/Default.aspx?tabid=53
> > > >
> > > > "GTP" <GTP@xxxxxxxxxxxxxxxxxxxxxxxxx> schreef in bericht
> > > > news:71F9258E-CEFA-42E1-8FCA-9E57A7CA88A2@xxxxxxxxxxxxxxxx
> > > > > I should also mention, when I say my users can connect to the
> > Intranet,
> > > > the
> > > > > users are on a switch located on my Int nic.
> > > > >
> > > > > "GTP" wrote:
> > > > >
> > > > > > Not sure what happened but now its a total mess.
> > > > > > I tried to repair the "ext netowrk connection" but I got a arp
cache
> > > > error"
> > > > > > and another error about the IP. This all started when my VPN
didn't
> > > > work, and
> > > > > > I reconfigured "router and remote access", but VPN is not a
concern
> > now
> > > > > > because I can't see the router (log-inj from my server. I re-ran
the
> > ICW
> > > > and
> > > > > > messed up something. I have my modem, to router, to ext nic. My
> > users on
> > > > the
> > > > > > network can accesss the Intranet and shared folders, but the
server
> > and
> > > > the
> > > > > > users can't see the internet or the router.
> > > > > >
> > > > > > I think I had my DNS set up on the ext nic as the DNS from the
ISP
> > as
> > > > set in
> > > > > > the router, and for I think for default gateway it was the
address
> > > > > > (192.168.0.1) of the router.
> > > > > >
> > > > > > Still, either way I still get the can't clear the ARP cache
error
> > and I
> > > > > > don't know how to clear it or if I might actually deletect
something
> > > > useful.
> > > > > >
> > > > > > Can anyone tell me how to at least get my ext nic to see the
router?
> > > >
> > > >
> > > >
> >
> >
> >


.

Relevant Pages

  • Re: Best Pratice for web site
    ... borrow a router from friends and installed it replacingt the one in service. ... Marina Roos ... Take part in SBS forum: ...
    (microsoft.public.windows.server.sbs)
  • Re: Networking Question - VLANs on SBS 2003 Premium SP1
    ... DHCP running on the router. ... Set the DHCP on the router, to make a exclusion of IP range. ... you can set the SBS use fix IP by run the CEICW. ... all gust wireless clients will get IP address from DHCP on the ...
    (microsoft.public.windows.server.sbs)
  • help
    ... Network, routers, DHCP and PXE ... wget vs fetch ... It's a Thomson SpeedTouch 585 router. ...
    (freebsd-questions)
  • Re: How do I configure SBS 2003 as a DHCP server?
    ... To disable the private "LAN" side DHCP service (not the DHCP service on the ... of the PPPoE adapter and enable your Speedstream as a DSL modem and router. ... For the Vista computer to interact with SBS, ... Windows Small Business Server 2003: ...
    (microsoft.public.windows.server.sbs)
  • Re: Best Pratice for web site
    ... have redone the router setup for port 443. ... If not, close port 80 inbound. ... Marina Roos ... Take part in SBS forum: ...
    (microsoft.public.windows.server.sbs)