Forward to an Internal - SBS2003 STD

2 NIC setup

I have std version of SBS

I need to forward some ports to an internal machine - how??

I've looked at Routing and Remote Access > Basic NAT but there is NO WAN
showing





.

Relevant Pages

  • Eventid 20108 with Remote Access
    ... When I start Routing and remote access and look at Ports I cannot see the ... two PPTP ports I configured, but I can see the L2TP VPN ports. ...
    (microsoft.public.win2000.general)
  • Event error 20108 Remote Access
    ... When I start Routing and remote access and look at Ports I cannot see the ... two PPTP ports I configured, but I can see the L2TP VPN ports. ...
    (microsoft.public.windows.server.setup)
  • Re: Multiport Modem cards (Perle)...
    ... the Ports section of the Routing and Remote Access? ... not clear is whether you are seeing all the devices under Device Manager or ... > Windows Server 2003 running Routing and Remote access. ...
    (microsoft.public.win2000.ras_routing)
  • Re: PC Anywhere
    ... I went into Administrative Tools> Routing and Remote Access and, ... Routing & Remote Access ... > services and ports TAB ... > one for port 5631 point it to the IP address of the work station you want ...
    (microsoft.public.windows.server.sbs)
  • RE: PPTP remote access ports dissapear - HELP PLEASE!
    ... ports disappear from the RRAS console. ... Based on my research, SBS have wizard to configure the VPN, we do not need ... Please open Routing and Remote Access console on SBS thru run command ... You have to rerun the CEICW to make sure your SBS 2003 server have right ...
    (microsoft.public.windows.server.sbs)