Re: Marina Roos,Re: since the 2nd NIC I can not access remotely anymore

Tech-Archive recommends: Fix windows errors by optimizing your registry

Hi Gabriel,

We are missing some vital DNS information here.
Indeed, your router should forward to the external nic IP, 192.168.1.2 for
all ports that you need to be forwarded. Your router has the LAN IP of
192.168.1.1. I don't understand your question about it?
Did you rerun CEICW and RRAS wizard? Which ports are you forwarding?

--
Regards,

Marina Roos
Microsoft SBS-MVP
One of the Magical M&M's
www.smallbizserver.net
Take part in SBS forum:
http://www.smallbizserver.net/Default.aspx?tabid=53

"Gabriel Viljoen" <gabriel@xxxxxxxxxxxxxxxxxxxxx> schreef in bericht
news:eiqArWAXFHA.2924@xxxxxxxxxxxxxxxxxxxxxxx
> Hi
>
> Here is my ipconfig
>
> Internal
>
> DHCP Enabled...........NO
> IP...............................192.168.200.2
> Subnet........................255.255.255.0
> Default Gateway.........
> DNS..........................192.168.200.2
> Primary Wins.............192.168.200.2
> NetBios over TcpIP...Disabled
>
> External
>
> DHCP Enabled...........NO
> IP...............................192.168.1.2
> Subnet........................255.255.255.0
> Default Gateway.........192.168.1.1
> DNS..........................192.168.200.2
> NetBios over TcpIP...Disabled
>
> Then my router forwards the Ports for remote access etc. to 192.168.1.2, I
> only have the option to change the .2 as the router has 192.168.1.? and I
> have to fill in the ?
>
> Thanks
> Gabriel
>
>


.

Relevant Pages

  • Re: 2 nics and ips
    ... Matt, thanks for getting back to me. ... That is going through a router which is ... forwarding port 80 to a 192 address. ... We were having both come in through the first nic card and the ports being ...
    (microsoft.public.windows.server.networking)
  • Re: 2 pc network - cant see host files from pc 2 on pc 1
    ... Assuming that you have firewall protection via your internet router try ... workgroup because it will be needed for the network to work correctly. ... see if you can access TCP ports 139 and 445 on computer one of which at ... permissions. ...
    (microsoft.public.windowsxp.security_admin)
  • ipf problems
    ... the router is randomly refusing the connections. ... This issue seems to be restricted only to ports I am forwarding. ... pass out quick on mxfe0 proto tcp from any to any keep state keep frags ...
    (comp.unix.solaris)
  • Re: Remote Access - without domain name
    ... We have been trying to set up forwarding the ports for some time now, and have lengthy phone calls and e-mails to Speedtouch support without success. ... This is why I am thinking of buying a modem, is your only criticism of this losing the connection when we restart the server? ... Perhaps you can recommend a different router? ...
    (microsoft.public.windows.server.sbs)
  • Re: Do I need these services listening?
    ... > first computer that has the modem & router, so I call the second one ... Your Netgear router should connect to the internet. ... Your Netgear router should have the public IP address. ... that if the ports look closed even ...
    (comp.security.firewalls)