RE: Remote Web Workplace to client with 2 NiC's

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance

Hi Bryce,

Thanks for your post.

Theoretically speaking, if you can access the Toshiba phone system from the
client PC, you will be able to connect it via the RWW.

Note: We must set the IP addresses of the two NICs that are installed on
the client PC in the different subnet. (In other words, the IP address of
the second NIC in the client PC should in the different subnet with the IP
address of the SBS internal NIC)

Also, make sure that you join the client PC to the SBS domain using
connectcomputer wizard.

If you have any questions please do not hesitate to let me know. I'm glad
to be of service.

Best regards,

Jerry Zhao (MSFT)

Microsoft CSS Online Newsgroup Support

Get Secure! - www.microsoft.com/security

=====================================================
When responding to posts, please "Reply to Group" via your newsreader so
that others may learn and benefit from your issue.
=====================================================
This posting is provided "AS IS" with no warranties, and confers no rights.


.

Relevant Pages

  • Re: Urgent! New router and big disaster
    ... it's quite possible you misconnected the nics when you put the server ... just File and Printer Sharing and the Microsoft Client ... running the internet connection wizard, ... I wonder if I may have missed a firewall setting on the router as well. ...
    (microsoft.public.windows.server.sbs)
  • Re: inside, outside, who am I?
    ... it runs on the 10 subnet. ... > both the pdc and the bcd have 2 nics, ... > the inside cards are configured static on the 10 subnet. ... and should be the only NIC that has Client for MS ...
    (microsoft.public.win2000.dns)
  • Re: Lan setup 2 nic
    ... It seems like I still have to create new clients for all the client ... What 2 available TCP/IP ... > Attached a screenshots of my 2 nics. ... Above that is the Clients for Networks ...
    (microsoft.public.windows.server.sbs)
  • Wireless laptop roaming through various access points
    ... Most client software seem to wait until the signal is *totally* lost ... What I would like to do sounds simple: if the laptop wifi software ... triggers a rescan of the nearest AP. ... Would it then be possible to bridge these two nics ...
    (alt.internet.wireless)
  • Re: 2 NICs different IPs in same network?
    ... My take on this is if you have two IPs with the same name, ... be a conflict with NetBIOS names ... enterprise) you need to disable NetBIOS, MS CLient Service and the F&P ... gives both NICs the same IP and they work in conjunction. ...
    (microsoft.public.win2000.networking)