RE: tsweb, RWW, OWA not working

I did as you suggested for steps 1-4. Step 2 was already set correctly. I
took your advice and skipped step 4. I still don't understand why I get
promted so many times for a username and password after I've logged in
initially.

In making the changes in step 3, I'm able to get a little further but now I
get "The page cannot be displayed" error.

Also, it looks like we're digressing with OWA. I can logon successfully,
but now I can't read the body of the emails.

On the left side the panel of folders displays fine. The middle shows the
from, subject, date info correctly, but the left hand side gives me the
following: "The page cannot be displayed. There is a problem with the page
you are trying to reach and it cannot be displayed. Please try the
following...HTTP 500 Internal server error. This occurs internally on the
lan as well "HTTP/1.1 500 Internal Server Error". I'm pretty sure this was
working earlier today. The only changes I have made other than those you
suggested was to install Symantec Antivirus Corporate Edition on the Server.

We're almost there. Just a few more niggly things. I appreciate all the
followup.

Regards. Shawn

"Chris Puckett [MSFT]" wrote:

> That's great!
>
> 1. You need to install this update to resolve the OWA logon issue.
>
> 843539 You cannot use Outlook Web Access with forms-based authentication and
> http://support.microsoft.com/?id=843539
>
> 2. Check the properties of the Default Web Site in IIS. (Directory Security
> tab - click Edit under Authentication).
> Anonymous Access and Integrated Windows Authentication should be checked.
> Uncheck Digest, Basic, and .NET.
>
> 3. The link for 'My Company's Internal Website' sends you to
> http://companyweb, not http://companyweb.domain.com. Since you have a
> local SBS 2003 server that hosts http://companyweb, you get the local web
> page. Otherwise, you would get 'the page cannot be displayed'. To get
> that link to work over the internet you have to edit the HTML code. See KB
> 838429.
>
> 838429 The "My Company's Internal Web Site" link on the default Web site
> http://support.microsoft.com/?id=838429
>
> 4. The "Network Configuration Wizard" link is intended to be used only on
> the LAN to join client computers to the SBS 2003 domain. As a result, only
> IP's within the subnet of the SBS 2003 server are allowed to access it by
> default. You are correct that you did not configure IP addresses for
> rejection. You can change this in the IIS Manager, but I wouldn't
> recommend it. I'll show you were this setting is configured because this
> will almost always resolve a 403.6 error for any website hosted in IIS. In
> the IIS Manager, expand the Default Web Site and view the properties of
> ConnectComputer (or the site that you receive the 403.6 on). Click the
> Directory Security tab and click Edit under IP Address and domain name
> restrictions. You can add additional IP ranges or change the default
> setting to 'granted access'.
>
> Chris Puckett, MCSE
> Microsoft Small Business Server Support
>
>
> This posting is provided "AS IS" with no warranties, and confers no rights.
>
>
.

Relevant Pages

  • RE: tsweb, RWW, OWA not working
    ... lan as well "HTTP/1.1 500 Internal Server Error". ... Check the properties of the Default Web Site in IIS. ... > that link to work over the internet you have to edit the HTML code. ... You can change this in the IIS Manager, ...
    (microsoft.public.windows.server.sbs)
  • RE: HELP! Strange Problem with Internet Access after Migration
    ... Server, you cannot access your web site www.tapeandmedia.com, but other ... If you are using ISA 2000, there is a known issue when the internal client ... Since the internet computers can access the published web sites, ...
    (microsoft.public.windows.server.sbs)
  • Re: Joining workstations across VLAN
    ... This issue may occur if you connect to the ConnectComputer server by ... runs under the Internet security zone. ... entire Web site from the Internet" is selected. ...
    (microsoft.public.windows.server.sbs)
  • Re: problems publishing owa on sbs2003 with isa2000
    ... On the SBS 2003 Server open the Server Management console. ... Click the "Connect to the Internet" link. ... entire Web site from the Internet" is selected. ... This newsgroup only focuses on SBS technical issues. ...
    (microsoft.public.windows.server.sbs)
  • Re: Cannot connect to RWW from home PC
    ... Open the Web site home page, and then look for links to the ... Internet Security and Acceleration Server ... You can still view subscribed feeds and some recently viewed ...
    (microsoft.public.windows.server.sbs)
Loading