Re: How to allow port 514?

Thanks for your reply.

Is publishing the port the same as setting a packet filter? If so, how
should I configure the packet filter?

Regards
Nick


"SuperGumby [SBS MVP]" <not@xxxxxxxxxxx> wrote in message
news:uBvka4ZUFHA.1432@xxxxxxxxxxxxxxxxxxxxxxx
>I haven't tried syslog service but would expect ISA server publishing the
>port to work.
>
> "Nick Hill" <please@xxxxxxxx> wrote in message
> news:d5dket$9n1$1$8302bc10@xxxxxxxxxxxxxxxxxxx
>> Hi
>>
>> SBS2003 Premium, Vigor 2600V router, internet access via 2nd nic.
>> Internal nic 192.168.16.2, External nic 192.168.1.10, Router 192.168.1.1
>>
>> Internet access working fine with no problems.
>>
>> I need to setup a syslog facility with my router. The router syslog
>> config asks for the pc ip address & an editable port of 514. I can't seem
>> to open this port to allow my workstation to receive syslog info from the
>> router. I assume that ISA is blocking this. Can someone help me with the
>> settings to open this port please?
>>
>> Setting the server to receive syslog info would be ok if I can't do it on
>> a workstation.
>>
>> I am able to set up a syslog with no problem if I connect a pc directly
>> to the router & configure the pc to the router's ip range.
>>
>> Regards
>> Nick
>>
>
>


.

Relevant Pages

  • Re: Probably silly Q
    ... My router has the ability to send access logs to an ip address, ... comes into that port off to a logfile, ... don't bother with all that nonsense...your syslog has the ability ... Or is the linksys BEFSR41 routers logging to ...
    (Fedora)
  • Re: Dlink and syslog
    ... I read on one forum that Dlinks wanted to store logs in user.*, ... Your router's syslog is supported by Wallwatcher. ... Based on my knowledge of using a router and now a FW appliance, ... is broadcasted on a port the router uses. ...
    (alt.internet.wireless)
  • How to allow port 514?
    ... SBS2003 Premium, Vigor 2600V router, internet access via 2nd nic. ... I need to setup a syslog facility with my router. ... this port to allow my workstation to receive syslog info from the router. ...
    (microsoft.public.windows.server.sbs)
  • Re: D-Link 604 and WallWatcher
    ... have been unable to configure the Log settings to be viewed by WallWatcher. ... > how I know that the DI-604 can send log records to Syslog port 514. ...
    (comp.security.firewalls)
  • Re: Probably silly Q
    ... And added the -r option to OPTIONS in the syslog file in /etc/sysconfig, SIGHUPed syslogd, and turned the routers ... Firewall on Linux system blocking port 514 protocol UDP? ... Linksys sends snmptraps to the snmptrap port this is a standard service that will listen to this ... Then the answer to the OP would be any snmp monitoring program, ...
    (Fedora)