How to allow port 514?
- From: "Nick Hill" <please@xxxxxxxx>
- Date: Thu, 5 May 2005 18:17:16 +0100
Hi
SBS2003 Premium, Vigor 2600V router, internet access via 2nd nic. Internal
nic 192.168.16.2, External nic 192.168.1.10, Router 192.168.1.1
Internet access working fine with no problems.
I need to setup a syslog facility with my router. The router syslog config
asks for the pc ip address & an editable port of 514. I can't seem to open
this port to allow my workstation to receive syslog info from the router. I
assume that ISA is blocking this. Can someone help me with the settings to
open this port please?
Setting the server to receive syslog info would be ok if I can't do it on a
workstation.
I am able to set up a syslog with no problem if I connect a pc directly to
the router & configure the pc to the router's ip range.
Regards
Nick
.
- Follow-Ups:
- Re: How to allow port 514?
- From: SuperGumby [SBS MVP]
- Re: How to allow port 514?
- Prev by Date: Re: SBS custom install
- Next by Date: Re: Server hangs then locks!
- Previous by thread: Format SBS 2003
- Next by thread: Re: How to allow port 514?
- Index(es):
Relevant Pages
|