Re: IBM x206 sever SBS 2003
- From: Rao <Rao@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Date: Thu, 5 May 2005 11:13:14 -0700
I still cannot install the SBS 2993. I have the new driver for SCSI form IBM
website ultra 320. SBS comes up with the first screen welcome to setup . I
Press the enter key and it goes to setup cannot find any hard drives
installed on the computers.
"Rao" wrote:
> I changed it to raid 1. 39 Gig Mirrored . I am in the serverraid manager and
> it shows the logical drive .
>
> "wedor" wrote:
>
> > RAID 0? No interest in data safety? Are you going for speed over all else?
> >
> >
> > "Rao" <Rao@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
> > news:B522956D-202B-4CB5-9C08-D75183BA19A9@xxxxxxxxxxxxxxxx
> > > Raid 0 Striped 64k stripe size( Bootable) . Adaptec AIC-7901 .
> > >
> > > "Frank Castle" wrote:
> > >
> > >> What type of configuration? RAID 5, mirror?
> > >>
> > >> "Rao" <Rao@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
> > >> news:238032D4-92B0-45FB-B1E2-7731FFA68593@xxxxxxxxxxxxxxxx
> > >> > I am rying to install Wndows 2003 SBS on IBM x206 sever . I downloaded
> > >> > new
> > >> > drivers from IBM but after i press f6 to install specific drivers it
> > >> > stll
> > >> > comes up and says setup could not find any hard disk drives . I
> > >> > formated
> > >> the
> > >> > scsi drives thay show in the initial boot process . what am i doing
> > >> > wrong.
> > >> >
> > >> > Rao K
> > >> >
> > >>
> > >>
> > >>
> >
> >
> >
.
- Follow-Ups:
- Re: IBM x206 sever SBS 2003
- From: wedor
- Re: IBM x206 sever SBS 2003
- References:
- IBM x206 sever SBS 2003
- From: Rao
- Re: IBM x206 sever SBS 2003
- From: Frank Castle
- Re: IBM x206 sever SBS 2003
- From: Rao
- Re: IBM x206 sever SBS 2003
- From: wedor
- Re: IBM x206 sever SBS 2003
- From: Rao
- IBM x206 sever SBS 2003
- Prev by Date: Re: How to allow port 514?
- Next by Date: Re: Format SBS 2003
- Previous by thread: Re: IBM x206 sever SBS 2003
- Next by thread: Re: IBM x206 sever SBS 2003
- Index(es):
Relevant Pages
|