ISA Server 2004 Set-Up Help

I know that I have posted about this question before, and I also know that I
have to wait for SBS 2003 Service Pack 1 to be installed before installing
ISA Server 2004. But I would like to know is there any special documentation
on how to set it up and can I set it up using the current configuration I
have. The configuration is as follows: Internet to Router to Switch then
the server has one NIC and it is plugged into the switch and ports opened on
the router to allow OWA, RWW, mail and ect. Please post any helpful
information that could help me new to ISA 2004. Thanks in advance.

Anthony
.

Relevant Pages

  • Re: SBS2000 to router IPSEC
    ... configuration is responsibility of it people in this office. ... Acording to the router log, they think that the problem is at isa server. ... Another big doubt is where to create the ipsec policies. ...
    (microsoft.public.windows.server.sbs)
  • Re: Out of Router Ports....add a new Router or Switch? (Home Network)
    ... >interested more in the best performance instead of price since the price of ... Don't use another router; that would be a waste of money and also ... Use a switch or even a hub. ... Hubs have no configuration. ...
    (comp.os.linux.networking)
  • Re: Image file question or Router fault
    ... all I want is an internet connection. ... and I did reboot the switch after switching the ... Could a corrupt image boot the router successfully? ... Most likely its a configuration issue. ...
    (comp.dcom.sys.cisco)
  • Re: POP3 Connector Working, E-Mail not delivered to Exchange Mailb
    ... I've changed our configuration around a bit. ... >> the ISA server. ... We need this setup because of some port forwarding that ... >> to be done on the router end, ...
    (microsoft.public.backoffice.smallbiz2000)
  • Re: POP3 Connector Working, E-Mail not delivered to Exchange Mailb
    ... NEW CONFIGURATION - ATTEMPT TO GET THIS WORKING ... >> the ISA server. ... >> to be done on the router end, ... > ISA will complain every time about the 2 nics on the same subnet. ...
    (microsoft.public.backoffice.smallbiz2000)