Re: Undoing the damage caused by the CEICW

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance

Hi Hollis,

Kill the PPPOE connection in the server. Kill the additional IP's on the
internal nic. Then rerun CEICW.

--
Regards,

Marina
Microsoft SBS-MVP
One of the Magical M&M's

"Hollis D. Paul" <Hollis@xxxxxxxxxxxxxxxxxxxxxx> schreef in bericht
news:VA.0000212e.01c41ecc@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
> In article <#qaT43TQFHA.3076@xxxxxxxxxxxxxxxxxxxx>, Marina Roos [SBS-MVP]
> wrote:
> > Hi Hollis,
> >
> > Use a router between your external nic and the DSL modem, that will
loose
> > the PPPOE connection.
> >
> Well, I do have a SMC700ABR between the box and the DSL modem. But the
> advantage of using the Win2003 connector is that you don't have to power
> down the router every time you disconnect for some reason.
>
> I also think that I have a PPPOE client built into the DSL modem itself.
> However, the service provider's support, Earthlink, was so technologically
> stupid that they barely knew that the box had been sent out with incorrect
> parameters. It took two months before they "discovered" how to give out
> the correct parameters and where to put them. However, they hadn't read
> the rest of the manual to figure out how to setup the PPPOE client in the
> DSL modem. Since that was unsupported, and this setup was working, I
> elected not to experiment. One of the few times I have been so cautious.
>
> That part doesn't seem to be broken. It's dns that seems to be the
> problem. Do you see anything not working there?
>
> Hollis D. Paul [MVP - Outlook]
> Hollis@xxxxxxxxxxxxxxxxxxxxxx
> Mukilteo, WA USA
>
>


.

Relevant Pages

  • Re: HELP: NAT/Masquerading broken with 2.6.11 + pppoe (long)
    ... I would try to use for the pppoe connection a dedicated ... IIRC NICs with an IP address assigned are supposed to ... such a setup successfully running a long time ago. ... LAN are not bridged by DSL modem towards your ISP. ...
    (comp.os.linux.networking)
  • Re: HELP: NAT/Masquerading broken with 2.6.11 + pppoe (long)
    ... > I would try to use for the pppoe connection a dedicated ... > such a setup successfully running a long time ago. ... > your private LAN are not bridged by DSL modem towards your ISP. ...
    (comp.os.linux.networking)
  • Unable to create a PPPoE connection in XP
    ... I'm unable to create a PPPoE connection using Windows so I can use my ... My DSL modem was working fine up to a week ago and then it ... My ISP told me I have a non-uft modem that has to have ...
    (microsoft.public.windowsxp.general)
  • Cant create a PPPoE connection
    ... I'm unable to create a PPPoE connection using Windows so I can use my DSL ... My DSL modem was working fine up to a week ago and then it quit, ... My ISP has no software to do this as Windows XP is ...
    (microsoft.public.windows.inetexplorer.ie6.browser)
  • Re: Undoing the damage caused by the CEICW
    ... > the PPPOE connection. ... I do have a SMC700ABR between the box and the DSL modem. ... down the router every time you disconnect for some reason. ... I also think that I have a PPPOE client built into the DSL modem itself. ...
    (microsoft.public.windows.server.sbs)