Re: Added router, lost web site

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance

From: davidcbrown (dcbrown1_at_removethis.frontiernet.net)
Date: 01/14/05 

Date: Fri, 14 Jan 2005 12:59:24 -0500

> Don't choose the router with local IP, choose the direct broadband
> connection.

OK. Still same message box/icwlog error. (But with the router I don't
really have a direct connection. Is this for diagnosis or this is the
recommend setup for a router?)

> Don't use the server.local for web certificate, fill in your public IP.

Sorry again. It was/is someserver.somedomain.biz not .local.

> Change the email settings as well, and make sure your emaildomain is
listed
> right.

Yes, somedomain.biz

So still same error. Baffling. Below is a record of my last CEICW run.
Yes, I have unchecked wwwroot.

Thanks, David
------
Connection type: direct broadband connection
Internet connection information:
 Connection name: Network Connection
 IP address: 192.168.2.2
 Subnet mask: 255.255.255.0
 Default gateway: 192.168.2.1
 Preferred DNS server: someisp DNS server address
 Alternate DNS server: someisp alternate DNS server address

Firewall: Enable
Additional services available through the firewall from users on the
Internet:
 E-mail
 Virtual Private Networking (VPN)
 SBS NTP 123 Out CustomFilter
 IRC TCP 6667 Out CustomFilter
 HTTPS 443 Out CustomFilter
Web services on your server's default Web site to be available through the
firewall to users on the Internet:
 Outlook Web Access
 Remote Web Workplace
 Server performance and usage reports
 Outlook Mobile Access
 Outlook via the Internet
 Windows SharePoint Services intranet site

Do not change current Web server certificate
Email: Enable Exchange for Internet e-mail with the following settings:
E-mail delivery:
Route e-mail to the Internet via the following e-mail server at your ISP:
smtp.someisp.net.
E-mail retrieval:
Use the Microsoft Connector for POP3 Mailboxes to retrieve e-mail from POP3
mailboxes.
Use Exchange to retrieve SMTP e-mail.
Email retrieval method:
Route e-mail from the Internet directly to Exchange.
Registered Internet e-mail domain name: somedomain.biz.
Mail delivery schedule: Deliver mail for Exchange mailboxes and POP3
mailboxes by using the defined schedule.
E-mail attachments: Remove e-mail attachments from Internet e-mail as
specified in the wizard.

"Marina Roos [SBS-MVP]" <marina@roos.nodontwantspam.nl.com> wrote in message
news:O4XhX2l#EHA.1936@TK2MSFTNGP10.phx.gbl...
> Hi David,
>
> Don't choose the router with local IP, choose the direct broadband
> connection.
> Don't use the server.local for web certificate, fill in your public IP.
> Change the email settings as well, and make sure your emaildomain is
listed
> right.
>
> --
> Regards,
>
> Marina
> Microsoft SBS-MVP
> One of the Magical M&M's
>
> "davidcbrown" <dcbrown1@removethis.frontiernet.net> schreef in bericht
> news:uTgjBrl%23EHA.3596@TK2MSFTNGP12.phx.gbl...
> > > Choose Full Broadband in the Network screen during CEICW.
> >
> > Yes and then "A local router device with an IP address".
> >
> > > Check that the LAT in ISA only displays your internal IP range.
> >
> > Yes, LAT is 192.168.16.0 to 192.168.16.255.
> >
> > > Do not check all services in the Firewall section. Certainly not the
> > business root, only the services that you need.
> >
> > OK. I just tried this again. Went through Full Broadband, change the
> > Firewall settings, no change to E-mail settings. I still get a message
> box
> > in the Firewall Configuration stage that says: An error occured while
> > configuring a component. To continue with the wizard and configure
> > remaining components, click, OK. To end the wizard without configuring
> the
> > remaining components, click Cancel. Same error in the (new) icwlog.txt
> file
> > as in my original post.
> >
> > > What did you choose for the web certificate?
> >
> > Created a local certificate for someserver.somedomain.local as part of
the
> > original install. No change has been made since.
> >
> > Thanks,
> >
> > David
> >
> > "Marina Roos [SBS-MVP]" <marina@roos.nodontwantspam.nl.com> wrote in
> message
> > news:edRPNOl#EHA.608@TK2MSFTNGP15.phx.gbl...
> > > Hi David,
> > >
> > > Choose Full Broadband in the Network screen during CEICW. Check that
the
> > LAT
> > > in ISA only displays your internal IP range. Do not check all services
> in
> > > the Firewall section. Certainly not the business root, only the
services
> > > that you need.
> > > Rename the current icwlog.txt and rerun CEICW after checking the LAT.
> What
> > > did you choose for the web certificate?
> > >
> > > --
> > > Regards,
> > >
> > > Marina
> > > Microsoft SBS-MVP
> > > One of the Magical M&M's
> > >
> > > "davidcbrown" <dcbrown1@removethis.frontiernet.net> schreef in bericht
> > > news:OoTX2Cl%23EHA.2016@TK2MSFTNGP15.phx.gbl...
> > > > Hello Marina,
> > > >
> > > > My original post said that I had an error on running CEICW and
> choosing
> > to
> > > > disable the firewall. That was incorrect. The only time I do not
get
> > the
> > > > error is when I disable the firewall. Everytime I attempt to change
> the
> > > > firewall configuration, the CEICW errors on "Firewall Configuration"
> > (and
> > > > not "Secure Website Configuration").
> > > >
> > > > In brief. All was fine before I added a router and reran CEICW to
> > change
> > > > the network settings to a router configuration. But a couple of
days
> > > later,
> > > > I noticed that I could not browse my own web site (internally). The
> > CEICW
> > > > firewall error showed up when I attempted to correct the browsing
> > problem
> > > by
> > > > re-running CEICW. Now that CEICW error will not go away. But there
> > never
> > > > have been any events in the application/system logs indicating a
> > problem.
> > > > It does appear that ISA is running fine. IIS is running but I still
> > > cannot
> > > > browse my own web site.
> > > >
> > > > It seems like this would be a simple problem. But the icwlog error
is
> > > > baffling. If I were under pressure, I would probably just call
> > Microsoft.
> > > > But I would like to understand why this has happened.
> > > >
> > > > ipconfig/all follows. (I also greatly appreciate your web site.)
> > > >
> > > > Thanks,
> > > >
> > > > David
> > > >
> > > > Windows IP Configuration
> > > > Host Name . . . . . . . . . . . . : someserver
> > > > Primary Dns Suffix . . . . . . . : somedomain.local
> > > > Node Type . . . . . . . . . . . . : Unknown
> > > > IP Routing Enabled. . . . . . . . : Yes
> > > > WINS Proxy Enabled. . . . . . . . : Yes
> > > > DNS Suffix Search List. . . . . . : somedomain.local
> > > >
> > > > Ethernet adapter Server Local Area Connection:
> > > > Connection-specific DNS Suffix . :
> > > > Description . . . . . . . . . . . : Intel(R) PRO/1000 MTW Network
> > > > Connection
> > > > Physical Address. . . . . . . . . : 00-0D-56-0E-62-E2
> > > > DHCP Enabled. . . . . . . . . . . : No
> > > > IP Address. . . . . . . . . . . . : 192.168.16.2
> > > > Subnet Mask . . . . . . . . . . . : 255.255.255.0
> > > > Default Gateway . . . . . . . . . :
> > > > DNS Servers . . . . . . . . . . . : 192.168.16.2
> > > > Primary WINS Server . . . . . . . : 192.168.16.2
> > > >
> > > > Ethernet adapter Network Connection:
> > > > Connection-specific DNS Suffix . :
> > > > Description . . . . . . . . . . . : 3Com 3C905TX-based Ethernet
> > Adapter
> > > > (Generic)
> > > > Physical Address. . . . . . . . . : 00-60-08-B0-F7-41
> > > > DHCP Enabled. . . . . . . . . . . : No
> > > > IP Address. . . . . . . . . . . . : 192.168.2.2
> > > > Subnet Mask . . . . . . . . . . . : 255.255.255.0
> > > > Default Gateway . . . . . . . . . : 192.168.2.1
> > > > DNS Servers . . . . . . . . . . . : 192.168.16.2
> > > > NetBIOS over Tcpip. . . . . . . . : Disabled
> > > >
> > > > "Marina Roos [SBS-MVP]" <marina@roos.nodontwantspam.nl.com> wrote in
> > > message
> > > > news:#qhEe7Y#EHA.3236@TK2MSFTNGP15.phx.gbl...
> > > > > Hi David,
> > > > >
> > > > > Rerun CEICW and do enable the firewall.
> > > > > Can you post the ipconfig/all from the server?
> > > > >
> > > > > --
> > > > > Regards,
> > > > >
> > > > > Marina
> > > > > Microsoft SBS-MVP
> > > > > One of the Magical M&M's
> > > > >
> > > > > "davidcbrown" <dcbrown1@removethis.frontiernet.net> schreef in
> bericht
> > > > > news:%2370Jm7O%23EHA.3700@tk2msftngp13.phx.gbl...
> > > > > > First, yes it is true that I have a web site published on a SBS
> 2003
> > > > > Premium
> > > > > > system, but this is an isolated test server and not a production
> > > server.
> > > > > >
> > > > > > SBS 2003 was running fine with a direct connection to a DSL
modem.
> > > > CEICW
> > > > > > Web Services Configuration had "allow access to only the
following
> > Web
> > > > > site
> > > > > > services" and all services checked.
> > > > > > I could browse all web sites; default, companyweb, sharepoint
and
> my
> > > own
> > > > > web
> > > > > > site (locally and externally).
> > > > > >
> > > > > > Added a router and reran CEICW for "a local router with an IP
> > > address".
> > > > > Did
> > > > > > not change the firewall settings. (Was that a mistake?) While
I
> > can
> > > > > browse
> > > > > > all SBS supplied web sites; default, companyweb, and sharepoint,
> now
> > > > > cannot
> > > > > > browse my web site (locally). I get a 10060 - Connection
timeout.
> > > > > >
> > > > > > So I went back to the CEICW (right?) and attempted to change the
> > > > firewall
> > > > > > configuration by excluding wwwroot from the Web Services
> > > Configuration.
> > > > > > Everytime I attempt to change the firewall configuration, the
> CEICW
> > > > errors
> > > > > > on "Firewall Configuration" (and not "Secure Website
> > Configuration").
> > > > The
> > > > > > log always shows:
> > > > > > ...
> > > > > > Call to Creating A record for publishing () returned ok.
> > > > > > RUP is published
> > > > > > Error 0x80005006 returned from call to Fixing the inheritance
for
> > root
> > > > > > dir().
> > > > > > Error 0x80005006 returned from call to Committing Web publishing
> > > > rules().
> > > > > > Error 0x80005006 returned from call to CCometCommit::Commit().
> > > > > > ...
> > > > > > No application or system events.
> > > > > >
> > > > > > So I tried disabling the firewall in CEICW. That worked with
> error.
> > > > Then
> > > > > I
> > > > > > tried to re-enable it and it says that ISA is installed but not
> > > > running...
> > > > > > do I want to use it? Yes, but I still get the firewall
> > configuration
> > > > > error.
> > > > > > I can manually start the ISA services. Still, no application or
> > > system
> > > > > > events.
> > > > > >
> > > > > > I have made no changed "under the hood". I did try using "all
> > > > > unassigned"
> > > > > > for the web site IP address, just to see if it made any
> difference.
> > > It
> > > > > did
> > > > > > not, so I changed it back the internal IP address
(192.168.16.2).
> > > > > >
> > > > > > So which "root dir" is this? wwwroot? If my default site can
see
> > > > > wwwroot,
> > > > > > what's wrong with it? My web site is directly under wwwroot and
I
> > can
> > > > > > "Explore" both. Or is there something else wrong?
> > > > > >
> > > > > > I don't want to start over just because I've added a router.
> > > > > >
> > > > > > David
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>

Relevant Pages

  • Re: Added router, lost web site
    ... Did your ISP create a DNS record for your FQDN? ... > really have a direct connection. ... > Internet connection information: ... > Preferred DNS server: someisp DNS server address ...
    (microsoft.public.windows.server.sbs)
  • Re: Cannot find server or DNS Error
    ... Did you have configured a forwarder on your DNS server to the ISP's DNS server? ... If your internal DNS has no connection to internet or does not know where to forward the request the name resolution stops here. ... you may need to adjust your browser settings. ...
    (microsoft.public.windows.server.dns)
  • Re: CEICW & software updates...
    ... I would suggest using Direct Broadband Connection. ... The DSL router does connect directly to the internet. ... >>> DNS returned ok. ... >>> Call to Clearing DNS server entries on the LAN NIC returned ok. ...
    (microsoft.public.windows.server.sbs)
  • Re: unable to set up connectcomputer between VISTA and SBS
    ... You need to disable any other NIC that shows up under the network connection ... I have trouble setting up internet connection in between Vista Tablet ... He set up DNS server on IPv4 by: ...
    (microsoft.public.windows.server.sbs)
  • DNS Error Help!
    ... DHCP you should mention the ISP DNS server address in the ... the connection is being shared has static IP address. ... >dialup internet connection. ... >Also I couldnt retrive or send any emails from my Windows ...
    (microsoft.public.win2000.networking)