Network VPN to connect to Domain

Tech-Archive recommends: Fix windows errors by optimizing your registry

From: Robb Pierce (RobbPierce_at_discussions.microsoft.com)
Date: 12/28/04 

Date: Mon, 27 Dec 2004 16:51:03 -0800

I have a SBS2k3 premium with single nic, only because of the situation. Like
Linksys rv042 VPN routers. They are configured, the VPN is working. Server
addy is 192.168.16.2. That router is .1 and the other router offsite is
17.1. I can't configure the routers in the same subnet, it wont connect,
even if out of range of DHCP. I cannot add any offsite computers to the
domain, manually, or using \\servername\connectcomputer. Denied access here,
403 error ip address message, typical and if i try to use sys properties to
do it manually, gives generic dns error. i assume this error is because it
only looks at its own subnet. How can I allow access to another subnet to
get these clients connected. Thanx for your help.

Relevant Pages

  • Re: Network VPN to connect to Domain
    ... Can you ping across your VPN, ... I can't configure the routers in the same subnet, it wont connect, ... Denied access ...
    (microsoft.public.windows.server.sbs)
  • Domain Logon via VPN
    ... Linksys rv042 VPN routers. ... Clients have server as their primary DNS. ...
    (microsoft.public.windows.server.sbs)
  • Re: HSRP and Policy Route
    ... routers think they are the local owner of the 5.1 subnet, ... now I am taking only default route from the ISP's but I guess if I ... So I'm assuming you have a switch in the 10.X network that goes to the ... of the subnet as you are saying that when Core 2 owns the 5.X network, ...
    (comp.dcom.sys.cisco)
  • Re: another vpn wins site to site to site problem*
    ... you effectively have three segments/subnets linked by routers. ... The current advice is to delete the DisableNetbiosOverTcpip ... subnet for the RAS/VPN interfaces to solve the browsing problem. ... I have a central server ...
    (microsoft.public.windows.server.networking)
  • Re: I want to link 2 lans at home
    ... > have to change the least significant bit of the sub net mask. ... So that for the original poster to add the two networks ... Anyway, if the two linksys' were just routers, just changing the subnet ... puttin everything on a /22 subnet as discussed previously in the thread. ...
    (comp.os.linux.networking)