Re: wireless router

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance

From: Tony R (truggeri_nospam_at_gte.net)
Date: 12/14/04 

Date: Tue, 14 Dec 2004 08:41:21 -0500

I am using SBS2K3 Standard with RRAS and it sounds like this will work.
I'll try it and let you know. Thanks

Tony

"SBS03 Rocks!!!" <SBS03@invalid.invalid> wrote in message
news:ecJDe4a4EHA.3596@TK2MSFTNGP12.phx.gbl...
> you only need to make sure the external nic of sbs doesn't have DHCP
> binded to it. This means you will have a static ip (192.168.0.2). The
> wireless router with DHCP enabled will be issuing 192.168.0.10-50 to the
> wireless clients. The internal clients will be using DHCP of the internal
> DHCP Nic of sbs (192.168.1.1). If you have laptops that are roaming thru
> the building they should be treated as external clients. This means that
> laptop one will be treated as an external client and need to vpn to access
> internal (sbs internal) files. Example would be that laptop1 gets a
> wireless ip from the router that is 192.168.0.11 and needs to access file
> server2 inside of sbs. The user would need to know they are treated as an
> outside client. They would then activate thier VPN account and vpn into
> the sbs network; this really means they will need to obtain a 192.168.1.x
> ip address. Once VPN is established the ipconfig should show that laptop1
> is now configured to have ip of 192.168.1.11 (notice it's 3rd octet is 1
> not 0).
>
> Now the laptop is part of the outside network of x.x.0.x and x.x.1.0 (1
> being internal).
>
> Is this helping?
>
> SBS03 Rocks!!!
>
> "Tony R" <truggeri_nospam@gte.net> wrote in message
> news:uqKbGZZ4EHA.3840@tk2msftngp13.phx.gbl...
>> Hello everyone,
>>
>> Hopefully someone can help figure this out. I have a DSL connection that
>> interfaces to a Wireless Router that interfaces to NIC 1 on an SBS2K3
>> server. The Wireless Router is a Belkin DSL/Cable Wireless G. The
>> SBS2K3 server is in a 2 NIC configuration and all domain workstations are
>> connected to NIC 2 on the SBS2K3 via a switch. The Router allows
>> wireless clients who come into the office to connect to the internet
>> through the DSL without having to connect to the SBS2K3 network. My
>> problem is that the DHCP service that is built into the Router must be
>> disabled in order for the DHCP service in the SBS2K3 to work. In doing
>> this, my wireless clients that are not part of the SBS2K3 domain are no
>> longer being issued an IP address. How do I get the Router to relay IP
>> requests to the SBS2K3 so that they can be issued by the SBS2K3 box even
>> though the clients are on the 'outside' network.
>>
>> thanks
>> TR
>>
>
>

Relevant Pages

  • Re: wireless router
    ... you only need to make sure the external nic of sbs doesn't have DHCP binded ... The internal clients will be using DHCP of the internal DHCP Nic ... of sbs. ... > DSL without having to connect to the SBS2K3 network. ...
    (microsoft.public.windows.server.sbs)
  • Re: wireless router
    ... David's suggestion to check the DHCP server bindings is where I'd be ... If I found that DHCP server was bound to the external NIC I'd probably run ... The internal clients will be using DHCP of the internal ... >> wireless clients who come into the office to connect to the internet ...
    (microsoft.public.windows.server.sbs)
  • Re: DHCP and Subnets
    ... I have a domain with DHCP running in my domain controller. ... wireless clients get an IP via DHCP but are placed into a workgroup and not ... Is it possible to set DHCP to give these clients IPs on a different subnet ... but are present within there own Workgroup. ...
    (microsoft.public.windows.server.general)
  • Re: Multiple PTR records wont go away in the reverse zone.
    ... Now please consider how disabling DDNS on DHCP clients ... networks and need to get an IP address and possibly register with DNS. ... remove it or update it when Secure only updates are enabled. ...
    (microsoft.public.windows.server.dns)
  • RE: DHCP for Simple Security
    ... > our clients to have a unique User-Defined Class in IPconfig. ... > Microsoft DHCP server would support IP assignment by User-Defined ... User Class option. ...
    (microsoft.public.windows.server.networking)