Re: No incoming mail from outside -- FIXED

From: Axel Larson (Axel_at_office.reliasense.com)
Date: 12/01/04


Date: Wed, 1 Dec 2004 12:17:41 -0800

Reading another post here gave me the clue I needed. I drilled down In
Exchange System Manager to Default Virtual SMTP Server properties and
discovered it was listening on 192.168.2.2. I changed this to (All
Unassigned) and the mail began to flow.

My thanks to those who responded to my post.
- Axel Larson

"Axel Larson" <Axel@office.reliasense.com> wrote in message
news:#uRWc891EHA.3388@TK2MSFTNGP10.phx.gbl...
> I reinstalled ISA2000 on SBS 2003 Premium server.
> The setup is:
>
DSL=>router192.168.12.1=>192.168.12.2Server192.168.2.2=>Switch=>192.168.2.xC
> lients.
>
> Mail works fine between machines on the local subnet. I can send mail out
to
> other internet sites but none comes in
>
> The router has port 25 open from any to any and TCP port 25 is forwarded
to
> 192.168.2.2.
> I reran CEICW and ISA has rules allowing TCP port 25 in and out to/from
> "default address on the enternal interface(s)" to/from any address.
>
> .
> Portqry and Telnet from local addresses show Exchange is listening on TCP
> port 25.
> Portqry and Telnet from another internet site indicate nobody is listening
> on TCP port 25.
>
> How can I find out what is blocking the incoming mail?
> --
> - Axel Larson
>
>



Relevant Pages

  • Re: Telnet to Localhost but not Server IP
    ... If there is nothing listening on TCP port 25 on IP address 192.168.0.1 make ... > The error when trying to telnet to IP is: Could not open connection to the ... >>> but cannot telnet to the mail server using the servers IP: ...
    (microsoft.public.windows.server.networking)
  • RE: Error deploying database to SQL Server Analysis Server
    ... Now we noticed that you could not telnet to the TCP port 2383 on which you thought that your SSAS ... Generally you can find what the TCP port that your SSAS instance is listening on from ...
    (microsoft.public.sqlserver.olap)
  • No incoming mail from outside
    ... Mail works fine between machines on the local subnet. ... The router has port 25 open from any to any and TCP port 25 is forwarded to ... Portqry and Telnet from local addresses show Exchange is listening on TCP ...
    (microsoft.public.windows.server.sbs)
  • Re: Cant telnet ...
    ... >> once it gets up and running, probably won't even use telnet but ssh) ... > If you are sure the telnet daemon is running then its probably a ... *listening* on TCP port 23. ... listening, check the logs and figure out why xinet died. ...
    (linux.redhat)
  • Re: Cant telnet ...
    ... >> once it gets up and running, probably won't even use telnet but ssh) ... > If you are sure the telnet daemon is running then its probably a ... *listening* on TCP port 23. ... listening, check the logs and figure out why xinet died. ...
    (linux.redhat.install)