New ISA Installation

From: Michael Patrick (MichaelPatrick_at_discussions.microsoft.com)
Date: 11/15/04 

Date: Sun, 14 Nov 2004 22:18:02 -0800

Okay, finally did it, just like everyone said I should.

Now here is the deal, the server can access the internet, but only certain
sites for some odd reason. All computers are the network cannot access the
internet at all.

So, what gives? I set up the whole network per the "Two Nics, a static IP
address, ISA, router" @ smallserver.net And nothing is working....

Also, per the setup, can I only access the router config on the server? Or
is there a way to jump nics to see the router from a workstation on the
internal network?

Thanks!

Relevant Pages

  • Re: Urgent! New router and big disaster
    ... The SBS DNS server, running on ... its IP it means that your problem is now DNS. ... forward ports to it reliably in the router. ... I should have been more clear about internet connection.. ...
    (microsoft.public.windows.server.sbs)
  • Re: Remote Access and Setting up a VPN....need some expert advice....
    ... Since you have two NICs in the server, you can setup VPN follow this step by step how to. ... Assuming the router is VPN pass through, you need to forward port 1723 to the IP 10.10.10.5. ... Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net ... internal network and has an address of 10.0.0.254. ...
    (microsoft.public.windows.server.sbs)
  • Re: Outgoing POP3 email missing/lost/not received
    ... ISP's mail server instead of the domain name on the ... SUMMARY OF SETTINGS FOR CONFIGURE E-MAIL AND INTERNET ... Internet Connection Wizard. ... After the wizard completes, the following network connection ...
    (microsoft.public.windows.server.sbs)
  • Re: Urgent! New router and big disaster
    ... I checked the binding order and the Server Local area connection is at the top. ... I should have been more clear about internet connection.. ... I wonder if I may have missed a firewall setting on the router as well. ...
    (microsoft.public.windows.server.sbs)
  • Re: Connect the SBS to a remote IIS for Internet Printing
    ... the server can access the Internet with no problems at all. ... Checking network connection, and after a few seconds it says The ... the problem is cause by the configuration of ISA. ...
    (microsoft.public.windows.server.sbs)