Re: ICW won't run...

From: Henry Craven (IUnknown_at_Dot.Nyet)
Date: 11/10/04


Date: Wed, 10 Nov 2004 12:41:11 +1100

Came across this the other day. took ages to winkle it out.
The NAT in RRAS has a DHCP Server. ( hence the Server IP Address as the
Second DHCP Server )
....have a look under Admin Tools RRAS > NAT and disable it.

( Sorry I don't have a server I can walk you through or my notes at the
moment, but I'm sure you'll find it. - If not, I'll post later. )

Not sure what causes it, but It may be the SBS Box finding an ICS
(Server) on one of the XP Workstations.

-- 
Henry Craven {SBS-MVP}
    Melbourne Australia
"ChrisS" <ChrisR@nospam.com> wrote in message
news:eyc0L$qxEHA.3120@TK2MSFTNGP12.phx.gbl...
> Error - can't set DHCP scope
>
> There are NO other DHCP's on the Network
> Both Linksys Wireless Router & Linux Firewall are set to NOT use DHCP
>
> GUID points to Servers own DHCP as being another DHCP !!!
>
> Any ideas how to cure this ???
>
>


Relevant Pages

  • RE: VPN, RRAS & DHCP
    ... DHCP correctly bound to Internal NIC. ... ISA firewall client was not used by the VPN client computer ... Check the status of the local server. ... <only when RRAS is set to obtain IP address from DHCP server. ...
    (microsoft.public.windows.server.sbs)
  • Re: VPN Error 733, Event Log Error 20050 with SBS 2003 - revisited
    ... the RRAS servers network card is not configured as a DHCP ... this is the only DHCP server on the ... First please open Routing and Remote Access console. ...
    (microsoft.public.windows.server.sbs)
  • RE: VPN, RRAS & DHCP
    ... only when RRAS is set to obtain IP address from DHCP server. ... VPN connections subsequently fail again. ...
    (microsoft.public.windows.server.sbs)
  • Re: DHCP issues (solved!)
    ... Rerun the RRAS wizard and see if that fixes it. ... I had set up a new Firewall Policy on ISA called Block Forbidden ... have DHCP connectivity!! ... on the bottom it shows "Server Local Area Connection". ...
    (microsoft.public.windows.server.sbs)
  • Re: Adding a printer
    ... There are things I cannot answer in the NAT RRAS setup about DNS ... Since my last post I did enable the DHCP and I then rebooted the server. ... > and that you actually mean the Configure RRAS wizard in Win2k3.... ...
    (microsoft.public.windows.server.networking)