Re: Backup Failing at Wizard - Error 80005008

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance

From: Steve Laws (SteveLaws_at_discussions.microsoft.com)
Date: 11/03/04 

Date: Tue, 2 Nov 2004 18:34:03 -0800

Marina,

I have followed your instructions including loading the latest drivers and
firmware. I am still experiencing the same errors. An RSM error appeared two
days ago however, I can not find any reference to it in the logs. I do
believe however that the RSM error message that appeared on screen contained
the error 80005008.

Best Regards
Steven Laws

"Marina Roos [SBS-MVP]" wrote:

> Hi Steve,
>
> Have you checked the HP site for the latest drivers?
> Delete the tapedrive from Devicemanagement. Delete the tapedrive from
> Removable Storage Manager. Scan for new hardware in Devicemanagement. It
> should show up automatically in RSM after a little while. Try again.
>
> --
> Regards,
>
> Marina
> Microsoft SBS-MVP
>
> "Steve Laws" <SteveLaws@discussions.microsoft.com> schreef in bericht
> news:DFEE0A6B-1905-45F4-B295-D76A11F46246@microsoft.com...
> > Marina,
> >
> > thanks for your quick reply.
> >
> > I have applied the patch as requested and rebooted even though it didn't
> > seem to be a requirement.
> >
> > I am still having the same problems.......Any ideas?
> >
> > Best Regards
> > Steve
> >
> > "Marina Roos [SBS-MVP]" wrote:
> >
> > > Hi Steve,
> > >
> > > Try hotfix 831664.
> > >
> > > --
> > > Regards,
> > >
> > > Marina
> > > Microsoft SBS-MVP
> > >
> > > "Steve Laws" <SteveLaws@discussions.microsoft.com> schreef in bericht
> > > news:8E2AE718-43B7-486E-9CFC-58E06ACC4D6A@microsoft.com...
> > > > I received a report that the backup had failed so I logged on to our
> > > > customers server and checked the logs. Here is the initial error
> message I
> > > > received. Backup "error finished with error code 0X80070458"
> > > >
> > > > I then tried running the backup wizard which failed at the processing
> end
> > > of
> > > > the interview and the following error was displayed.
> > > >
> > > > " An unexpected error occurred 80005008"
> > > >
> > > > I am using a HP DDS 40 tape drive for back up. Please find following
> the
> > > > last full log.
> > > >
> > > > Any help would be appreciated.
> > > >
> > > > Best Regards
> > > > Steve Laws
> > > >
> > > > 2/11/2004 11:00 PM
> > > > -------------------------------
> > > > Date: 2/11/2004
> > > > Time: 11:00 PM
> > > > User: SYSTEM
> > > > -------------------------------
> > > >
> > > > Backup Runner started.
> > > > NTMS session started successfully.
> > > > EnumerateNtmsObject(NTMS_LIBRARY) succeeded.
> > > > Will enumerate on 3 media libraries found.
> > > > GetNtmsObjectInformation(NtmsLibraryInfo) succeeded.
> > > > GetNtmsObjectInformation(NtmsLibraryInfo) succeeded.
> > > > Found an enabled library.
> > > > InventoryNtmsLibrary(NtmsInventoryOmid) succeeded.
> > > > Identify Media completed
> > > > EnumerateNtmsObject(NTMS_MEDIA_TYPE) succeeded.
> > > > Will enumerate on 0 media types found.
> > > > GetNtmsObjectInformation(NtmsLibraryInfo) succeeded.
> > > > Found an enabled library.
> > > > InventoryNtmsLibrary(NtmsInventoryOmid) succeeded.
> > > > Identify Media failed or was invalid.
> > > > EnumerateNtmsObject(NTMS_MEDIA_TYPE) succeeded.
> > > > Will enumerate on 0 media types found.
> > > > Unable to detect tape drive or tape media.
> > > > GetTapeMediaPoolName failed. (0x80070458)
> > > > GetBackupDestination failed. (0x80070458)
> > > > LaunchNTBackup failed. (0x80070458)
> > > > NTBackup finished the backup with errors.
> > > >
> > > > For more information about failed backups, see the article on
> > > > troubleshooting your backup at the following Web page:
> > > > http://go.microsoft.com/fwlink/?LinkId=18414
> > > >
> > > > Backup ended at Tuesday, 2 November 2004 11:00 PM
> > > > Backup error finished with error code 0X80070458.
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > >
> > >
> > >
>
>
>