OT: Need help accessing DSL router

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

From: Ascnet (gage_at_keepyourspamknightinsurancethankyou.com)
Date: 11/01/04 

Date: Mon, 1 Nov 2004 10:29:01 -0500

At some point in my SBS 03 install I am going to need to disable the part of
my DSL router that assigns IP address to my workstations. The router is a
Speed Stream 3681 from Effecient Networks. I believe I can telnet into it
but would appreciate any help anyone has.

John Gage

Relevant Pages

  • ddclient is definitely not updating my dynamic IP address
    ... After 5 days with the ddclient installed and configured, ... that my internet IP address has changed, ... I also tried yum install ddclient from freshrpms. ... DSL/10 DSL Router ...
    (Fedora)
  • RE: [Full-Disclosure] [OFFTOPIC] Zone Alarm
    ... install a DSL router and just forget about it was what I was trying to ... On the flip side, let's compare apples to apples, shall we? ... DSL Router also has Gnome and OpenOffice and 693 other .rpms installed, ... the RedHat is getting patched more because there's more stuff. ...
    (Full-Disclosure)
  • Re: Bypass SBS server and Connect directly to workstation ??
    ... On the subject of ISA 2004, Does this need to be installed separate from SBS 2004 Premium or Is this the firewall that is not install due to the SBS ... currently have the SBS server connected directly to the DSL Router(which handles DHCP). ...
    (microsoft.public.windows.server.sbs)
  • Re: Need help accessing DSL router
    ... > At some point in my SBS 03 install I am going to need to disable the ... > part of my DSL router that assigns IP address to my workstations. ... this for you - ask them to turn off DHCP and NAT if you are going to use ...
    (microsoft.public.windows.server.sbs)
  • Re: PCanywhere and ISA 2000
    ... The DSL Router should forward to 0.2 as you have it. ... would be 192.168.0.1 the LAN address of the router which is what the SBS ... Frank McCallister SBS MVP ... > workstation I want to connect to, ...
    (microsoft.public.windows.server.sbs)