Re: Can't connect to server or client

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

From: bob (bob4sold_at_yahoonospammail.com)
Date: 10/31/04 

Date: Sun, 31 Oct 2004 15:44:13 -0600

Yes, it always has been.

Hi Bob,

Did you also forward port 4125 from the router to your external nic IP? 

-- 
Regards,
Marina
Microsoft SBS-MVP
"bob" <bob4sold@yahoonospammail.com> schreef in bericht
news:ebK8mH3vEHA.1292@TK2MSFTNGP10.phx.gbl...
> This is what I get for an error window.
>
>
>
> Bob:
>
> Are you talking about connecting via RWW?   So are you saying you can do
OWA
> but not RDP or Connect to Desktop?
>
> Also for Trend installation, you didn't have to touch the firewall.  That
> port just points you locally to Trend's web interface.  In other words you
> would point to http://SBSServer:4343 or to access Trend's web interface.
>
> "bob" <bob4sold@yahoonospammail.com> wrote in message
> news:ei5%23yk2vEHA.1292@TK2MSFTNGP10.phx.gbl...
> >I have run CEICW and configure remote access, rebooted a number of times.
> >I
> > can log on with the exchange switch and check email but when I try to
> > connect to the server or a desktop, I get an error window stating
> > connections my not be configured properly, or, the system is not
> > configured
> > for remote access.  I can connect remotely internally.  Have I missed a
> > port
> > on the firewall to forward.  This all started when I forwarded port 4343
> > to
> > attempt a Trend remote install on a client.  That doesn't work either.
> >
> >
>
>
>
>

Relevant Pages

  • Re: Cant connect to server or client
    ... Did you also forward port 4125 from the router to your external nic IP? ... "bob" schreef in bericht ... > would point to http://SBSServer:4343 or to access Trend's web interface. ... >>I have run CEICW and configure remote access, ...
    (microsoft.public.windows.server.sbs)
  • Re: fc3, sendmail, and dovecot problems revisited
    ... > Alexander and Bob, please accept my appology, I was so wrong! ... > port ..private port tcp or udp and private address you want it to point ... ifconfig with IP address aliasing for redundant MRTG machines. ... if you are looking for redundancy and not load sharing. ...
    (Fedora)
  • Re: COM1 not behaving...
    ... "Bob I" wrote: ... connected to COM1 clicks as it has done for all the years that I've ... serial port, a fifo was detected. ... search for this error message; ...
    (microsoft.public.windowsxp.hardware)
  • Re: Pinheads in Port St. Lousy, Fl. ?
    ... Actually Port St. Lucie, Bob ... but there are a couple of dozen pins to play. ...
    (rec.games.pinball)
  • Re: Pinheads in Port St. Lousy, Fl. ?
    ... Actually Port St. Lucie, Bob ... but there are a couple of dozen pins to play. ...
    (rec.games.pinball)