Re: Cisco 760

Tech-Archive recommends: Speed Up your PC by fixing your registry

From: WK (wkent_at_netsandbytesdotcom)
Date: 10/23/04 

Date: Sat, 23 Oct 2004 10:36:27 -0800

Hi Stuart,
I am using telnet from the LAN, can also use HyperTerminal via the console
cable.. I was not aware of a web interface. Cisco newbie :(
I am using the commands
show ip pat
set ip pat port <port number> <ipaddress of server>
The Cisco command manual says to issue this;
set ip pat port HT <server ip address> which allows 80 and 443. This works
and all is good.
This doesn't work.
set ip port pat HT <serveripaddress> OFF disabling HTTP & SSL
set ip pat port 443 <serveripaddress> Which should turn on 443 and does
according to show ip pat.
The server doesn't respond to any calls via ssl externally.

Thanks for your help.
Wayne

"Stuart Mackie [MCP, MSP]" <newsgroups@--REMOVE_THIS-NO_SPAM--stu.uk.com>
wrote in message news:%236wySySuEHA.2128@TK2MSFTNGP11.phx.gbl...
> Hi Wk. How are you configuring the router, via the web interface or the
> CLI (command line interface) ?
>
> --
> Hth,
> Stuart Mackie [MCP, MSP]
> www.stu.uk.com
>
>
> "WK" <wkent@netsandbytesdotcom> wrote in message
> news:%23jSkBKSuEHA.2804@TK2MSFTNGP14.phx.gbl...
>> Hi,
>> SBS2003 dual NICS & ISA2000 SP2 FP1. Opened SMTP, OWA, RDP & RWW.
>> My client has a Cisco 760 aDSL router. I was able to program it, Cisco
>> newbie, to forward the common ports for SBS2003 and all is working fine.
>> My dilemma is that in order to forward 443 this router must forward 80
>> which I don't like. I have read the manual for this router but cannot
>> find a solution. Does anyone have experience with this, all suggestions
>> gratefully received.
>>
>> WK
>>
>
>

Relevant Pages