Re: ISA Help Needed

From: Marina Roos [SBS-MVP] (marina_at_roos.nodontwantspam.nl.com)
Date: 10/10/04 

Date: Mon, 11 Oct 2004 00:46:26 +0200

Hi Adam,

Have a look here for the CEICW (almost the same for Premium): 

-- 
Regards,
Marina
Microsoft SBS-MVP
"Adam Selene" <as@freeluna.org> schreef in bericht
news:175801c4af18$9ef68b10$a501280a@phx.gbl...
> Hi Marina,
>
> I DO have 2 NICs.
>
> Yes to the Firewall.
>
> I don't know where to look for "Web Services". What you're
> saying rings a bell but I can't recall where the question
> is.  I don't want to offer ANY web services to the outside
> world.
>
> I have a Linksys BEFSR41 on the WAN-side NIC. It blocks
> the NETBIOS ports plus 445 and 113.  I'd hoped to do
> without it after getting ISA configured properly.
>
> Thanks for your patience,
>
> Adam
>
> >-----Original Message-----
> >Hi Adam,
> >
> >Do you have 2 nics? Did you run CEICW and enabled the
> Firewall? Did you in
> >Web Services made sure you didn't check 'access to entire
> web site from the
> >internet' or 'business web site'? Do you have a router
> connected to your
> >second nic?
> >
> >-- 
> >Regards,
> >
> >Marina
> >Microsoft SBS-MVP
> >
> >"Adam Selene" <as@freeluna.org> schreef in bericht
> >news:335c01c4af14$40fe2260$a401280a@phx.gbl...
> >> Thanks to all who replied. I've done as Susan suggested
> >> and I can now do what I need.
> >>
> >> However, I went to Steve Gibson's site and he tells me
> >> that Ports 25 and 80 are open.
> >>
> >> Since I'm not hosting mail acquired/sent via SMTP, I'd
> >> like this one closed.  Same for Port 80: since I have no
> >> web server to make available to the outside world, the
> >> only inbound Port 80 traffic I'd like is that which is
> >> responsive to a previous outbound message.  I.E., I'd
> like
> >> to close Port 80 to unsolicited traffic.
> >>
> >> I will be using OWA and I will be using RWW but that's
> the
> >> only inbound stuff I'll be doing apart from POP3 mail.
> >>
> >> I'd appreciate some guidance here.
> >>
> >> Thanks,
> >>
> >> Adam
> >>
> >>
> >>
> >>
> >> >-----Original Message-----
> >> >Hi
> >> >
> >> >I have two non-domain computers connecting thru ISA as
> >> Susan suggests and it
> >> >works fine.
> >> >
> >> >-- 
> >> >Frank McCallister SBS MVP
> >> >COMPUMAC
> >> >"Susan Bradley, CPA aka Ebitz - SBS Rocks [MVP]"
> >> <sbradcpa@pacbell.net>
> >> >wrote in message
> >> news:eX2mgVurEHA.2008@TK2MSFTNGP12.phx.gbl...
> >> >> If I do all/all/all and don't ask for
> authentication...
> >> I "think" they all
> >> >> go through even my laptop that isn't on the domain
> but
> >> just hooked in and
> >> >> getting an IP.
> >> >>
> >> >>
> >> >>
> >> >> Marina Roos [SBS-MVP] wrote:
> >> >>> Hi Adam,
> >> >>>
> >> >>> You can install the Firewall client by browsing to
> >> \\servername\mspclnt
> >> >>> and
> >> >>> run setup.exe.
> >> >>>
> >> >>> For workstations that are not on your domain you
> will
> >> just have to point
> >> >>> the
> >> >>> LAN settings in IE to your servername and port 8080.
> >> It will ask for
> >> >>> credentials though. You might consider putting those
> >> guest clients
> >> >>> straight
> >> >>> into the router.
> >> >>>
> >> >>
> >> >> -- 
> >> >> http://www.sbslinks.com/really.htm
> >> >> http://www.msmvps.com/bradley
> >> >> https://www.ecora.com/ecora/jump/pm99.asp
> >> >
> >> >
> >> >.
> >> >
> >
> >
> >.
> >

Relevant Pages

  • Re: ISA Help Needed
    ... "Adam Selene" schreef in bericht ... > I DO have 2 NICs. ... I don't want to offer ANY web services to the outside ... Same for Port 80: since I have no ...
    (microsoft.public.windows.server.sbs)
  • Re: ISA Help Needed
    ... Do you have 2 nics? ... Did you run CEICW and enabled the Firewall? ... "Adam Selene" schreef in bericht ... Same for Port 80: since I have no ...
    (microsoft.public.windows.server.sbs)
  • Re: About Adam Replication Traffic
    ... in a multihomed server" question that the poster asked in another thread. ... to be between just a given pair of nics. ... ADAM instance and see what happens! ... > Sites are used to control the frequency of replication. ...
    (microsoft.public.windows.server.active_directory)
  • Re: ADAM and Windows Address Book
    ... Which port is your WAB configured to talk to: LDAP or SSL? ... I've tried from a local admin account on the ADAM server. ...
    (microsoft.public.windows.server.active_directory)
  • Re: Does linux-sun-jdk_1.4.2 work?
    ... because you have the Linux proc file system mounted ... Perhaps you should try writing a port yourself before ... Adam Migus - Research Scientist ...
    (freebsd-current)