Re: Single NIC configuration with cable modem/router

From: JCerrone (JCerrone_at_discussions.microsoft.com)
Date: 09/08/04


Date: Tue, 7 Sep 2004 19:19:07 -0700

I have seen the recommendation to go with 2 NICs. On the other hand, the
boss says 1 NIC is supposed to be a supported configurationand "I shouldn't
need to spend more money!".

"Frank McCallister" wrote:

> Hi
>
> You would be well served to put a second NIC in the server and set it up as
> shown in http://www.smallbizserver.net/Default.aspx?tabid=52 (ignore the ISA
> parts if Standard) This will be a more secure and easier to setup network.
>
> Frank McCallister
> COMPUMAC
> "JCerrone" <JCerrone@discussions.microsoft.com> wrote in message
> news:7E9FB987-8416-4A26-80D6-9DF4AD2B3CE1@microsoft.com...
> >I have just installed a new SBS2003...previously, our small network was
> >just
> > peer-to-peer with a workgroup. There is a single NIC in the server. The
> > connection to the WAN is through a router which acts as the firewall.
> > Connection is provided by cable modem.
> >
> > Usually, I can see the internal LAN and get to the WAN. Frequently,
> > though,
> > I seem to time out as IE will think it's working offline. My internet
> > provide says their DNS servers are running fine. If if ping an external
> > web
> > page, sometimes I get replies and sometimes I time out. I'm not sure
> > where
> > to troubleshoot for this problem.
> >
> > The clients are configured to point to SBS2003 server as the DNS server.
>
>
>



Relevant Pages

  • Re: CEICW failure
    ... Right now, your PPPoE connection is acting as a NIC, another network ... >> Moose has two pysical nics in his server, ... it fails during the Network Configuration ... >> Call to Changing startup type for DNS returned ok. ...
    (microsoft.public.windows.server.sbs)
  • Re: Client Internet Access
    ... Broadband Connection" and on the "Router Connection" screen, ... check the binding order of your NICs: ... Connection-specific DNS Suffix. ... internet from any of the computers on the internal network. ...
    (microsoft.public.windows.server.sbs)
  • Re: 45 days STUCK LIKE CHUCK. DNS / Mx record cant recieve emails
    ... Is this SBS Premium, and if so, in ISA, is the "SBS SMTP Server Access Rule" ... like Exchange not listening on the Internet NIC. ... Nics Cards internal / externally.. ... You can test the connection from within the LAN, ...
    (microsoft.public.windows.server.sbs)
  • Re: SBS 2003 + TS. HELP needed URGENTLY please!
    ... no matter about the routing table the ISA client will be intercepting calls. ... This has the added advantages that should one of the services be down the router may be able to redirect traffic through the other connection. ... SBS remote support services. ... > The SBS server has 2 nics configured with ISA and a public IP I shall> call ...
    (microsoft.public.windows.server.sbs)
  • Re: Connection to ASDL modem fails on R2
    ... my NICs. ... "Joel Finkel" wrote: ... Connections | Connection Properties | General) ... I use the Connection Properties window to set the NIC's IP ...
    (microsoft.public.win32.programmer.networks)