Re: Publishing SBS 2003 Remote Web Workplace behine ISA Server

Tech-Archive recommends: Fix windows errors by optimizing your registry

From: Marina Roos [SBS-MVP] (marina_at_roos.nodontwantspam.nl.com)
Date: 08/20/04 

Date: Fri, 20 Aug 2004 16:15:37 +0200

Hi Brandon,

Did you forward the ports from your router to your external nic IP? Did you
run CEICW? 

-- 
Regards,
Marina
Microsoft SBS-MVP
"Brandon" <Brandon@discussions.microsoft.com> schreef in bericht
news:94E254CA-1365-46F7-ACFC-E5F27EBA54D0@microsoft.com...
> Hello,
>
> I have a SBS 2003 server behind a windows 2000 server with ISA server 2000
> SP1.  I have all of the remote web workplace working with SSL, but when I
> try to connect to the server desktop or a client desktop I receive an
error
> that the may not be open.
>
> I have a port 4125 protocol definition for incoming tcp traffic.  I also
> have a server publishing rule redirecting the external ip address of the
isa
> server to the address of the internal sbs server using the protocol
> definition 4125.
>
> The error that I am getting is:
> The client could not establish a connection to the remote computer. The
most
> likely causes for this error are:
>   a.. Remote connections might not be enabled at the remote computer.
>   b.. The maximum number of connections might be exceeded at the remote
> computer.
>   c.. A network error might have occurred while establishing the
connection.
>   d.. The Remote Web Workplace designated port might be blocked by a
> firewall
> The ISA Server logs show that it is accepting the connection on port 4125.
>
> Thanks,
> Brandon
>
> My other rules are
>     a web publishing rule for owa redirecting SSL to the sbs server for
the
> owa virtual directories.
>     a web publishing rule for other web access redirecting SSL to the sbs
> server for other web sites.
>     a server publishing rule for port 444 for sharepoint portal to the sbs
> server.
>     a server publishing rule for port 25 for smtp to the sbs server.
>
>

Relevant Pages

  • Re: Cannot telnet some ports
    ... Some with remote administration feature I believe. ... >> From a Windows 2003 Server SP2 ... >> fromn the 2k3 serrver but can telnet into any other port. ... kerberos 750/udp kdc # Kerberos udp ...
    (microsoft.public.windows.server.general)
  • RE: Remote Web Workplace not completely working.
    ... In order to allow a remote desktop connection to a client computer through ... TS requests through a firewall on TCP port 4125, ... To open the port 4125 on ISA, we can re-run CEICW to confirm it. ... server certificate) and then click Next. ...
    (microsoft.public.windows.server.sbs)
  • Re: ISA Rule for Remote Desktop?
    ... My server has a private IP address on the WAN NIC. ... I've just had an opportunity to try testing Remote Desktop through RWW from ... attempts being made from the logging interface in ISA to port 4125 when I ... There are three connection ...
    (microsoft.public.windows.server.sbs)
  • Re: Unable to Connect to Server/Client Desktop using RWW
    ... Please post the results of an ipconfig /all for the sbs server. ... I did another test after turning off the firewall on the remote. ... If port 4125 was not forwarded on the sbs machine, ...
    (microsoft.public.backoffice.smallbiz)
  • Re: Kazzaa- spyware
    ... > server, then file retrievals from your machine must be done with the ... >>- Allow all UDP for both direction, for local port 123 and remote port ... > But unfortunately RR is changing the DNS addresses all the time. ...
    (comp.security.firewalls)