Re: http://companyweb

From: Peter Schott (anonymous_at_discussions.microsoft.com)
Date: 08/15/04 

Date: Sun, 15 Aug 2004 11:02:01 -0700

Marina:

I am not using DHCP on my W98 clients. This is really a
legacy from the configuration of our old NT 4.0 server
based network.

On one W98 client I just made the change to DHCP to see
if that makes a difference. It logged into the network
no problem, but still cannot access companyweb. My W2000
and XP clients use DHCP; accessing companyweb is not a
problem for those clients.

I cleared the cached internet files also on the same W98
client, no improvement. None of the W98 clients have any
trouble acessing other server-based files, folders,
services or applications.

I do not think I'm using ISA. How can I tell? I am
using a 3com OfficeConnect firewall, that's 192.168.100.1.

Thanks again,

Peter S.

>-----Original Message-----
>Hi Peter,
>
>You are not using DHCP, right? Not a biggie, but it
would make things easier
>if you were to change things.
>Can't remember if you are using ISA or not, but check
the IE settings on the
>W98 again. If using ISA, the Firewall Client should be
installed and the
>LAN-settings in IE should point to the server and port
8080.
>Clear the internetcache on the W98.
>Do you have any other problems on the W98 besides
accessing the companyweb?
>
>--
>Regards,
>
>Marina
>Microsoft SBS-MVP
>
>"Peter Schott" <anonymous@discussions.microsoft.com>
schreef in bericht
>news:5ff101c48182$0cfac870$a601280a@phx.gbl...
>Marina:
>
>I learn new things everyday... I mis-typed, I apologize,
>the config for the SBS server is:
>
>
>
>Windows IP Configuration
>
>
>
> Host Name . . . . . . . . . . . . : xliserver
>
> Primary Dns Suffix . . . . . . . :
>XLICorporation.local
>
> Node Type . . . . . . . . . . . . : Hybrid
>
> IP Routing Enabled. . . . . . . . : No
>
> WINS Proxy Enabled. . . . . . . . : No
>
> DNS Suffix Search List. . . . . . :
>XLICorporation.local
>
>
>
>Ethernet adapter Team #0 - Adaptive Load Balancing Mode:
>
>
>
> Connection-specific DNS Suffix . :
>
> Description . . . . . . . . . . . : Intel(R) Advanced
>Network Services Virtual Adapter
>
> Physical Address. . . . . . . . . : 00-0C-F1-80-9D-4C
>
> DHCP Enabled. . . . . . . . . . . : No
>
> IP Address. . . . . . . . . . . . : 192.168.100.2
>
> Subnet Mask . . . . . . . . . . . : 255.255.0.0
>
> Default Gateway . . . . . . . . . : 192.168.100.1
>
> DNS Servers . . . . . . . . . . . : 192.168.100.2
>
>****************
>
>The config for the W98 client is:
>
>
>
>Windows 98 IP Configuration
>
>
>
>Host Name . . . . . . . . . :
>ADMIN_3.XLICorporation
>
>DNS Servers . . . . . . . . : 192.168.100.2
>
>Node Type . . . . . . . . . : Hybrid
>
>NetBIOS Scope ID. . . . . . :
>
>IP Routing Enabled. . . . . : No
>
>WINS Proxy Enabled. . . . . : No
>
>NetBIOS Resolution Uses DNS : Yes
>
>
>
>0 Ethernet adapter :
>
>
>
>Description . . . . . . . . : PPP Adapter.
>
>Physical Address. . . . . . : 44-45-53-54-00-00
>
>DHCP Enabled. . . . . . . . : Yes
>
>IP Address. . . . . . . . . : 0.0.0.0
>
>Subnet Mask . . . . . . . . : 0.0.0.0
>
>Default Gateway . . . . . . :
>
>DHCP Server . . . . . . . . : 255.255.255.255
>
>Primary WINS Server . . . . :
>
>Secondary WINS Server . . . :
>
>Lease Obtained. . . . . . . :
>
>Lease Expires . . . . . . . :
>
>
>
>1 Ethernet adapter :
>
>
>
>Description . . . . . . . . : Intel(R) PRO Adapter
>
>Physical Address. . . . . . : 00-03-47-A1-7D-44
>
>DHCP Enabled. . . . . . . . : No
>
>IP Address. . . . . . . . . : 192.168.100.11
>
>Subnet Mask . . . . . . . . : 255.255.0.0
>
>Default Gateway . . . . . . : 192.168.100.1
>
>Primary WINS Server . . . . : 192.168.100.2
>
>Secondary WINS Server . . . :
>
>Lease Obtained. . . . . . . :
>
>Lease Expires . . . . . . . :
>
>***********************
>
>Our domain is XLICorporation. On the W98 Network
>Configuration, yes, in the Client Properties, the
>checkbox for Log on to NT Networks is checked and the
>domain is XLICORPORATION; on the Network Identification
>tab the work group is also XLICORPORATION
>
>Peter S.
>
>>-----Original Message-----
>>Hi Peter,
>>
>>That winipcfg doesn't make much sense. Are there typo's
>in there? E.g. the
>>default gateway 192.268.100.1. Where does the
>192.168.10.2 refer to?
>>Can you please post the ipconfig/all from your server
>(from the
>>commandprompt: ipconfig/all>ip.txt, then copy and paste
>ip.txt)
>>
>>In Network Configuration of the W98, properties of
>Client for Microsoft
>>Networks, it should have the check mark for 'domain' and
>the domain name in
>>the field. On the tab Network Identification of Network
>Configuration it
>>should have the same domain name in the field workgroup.
>>
>>--
>>Regards,
>>
>>Marina
>>Microsoft SBS-MVP
>>
>>"Peter Schott" <anonymous@discussions.microsoft.com>
>schreef in bericht
>>news:5fa401c48179$fb680260$a601280a@phx.gbl...
>>For Q. 1, the IP config for the W98 client is:
>>
>>Host Information
>>Host Name = ADMIN_3.XLICorporation
>>DNS Servers = 192.168.100.2
>>Node Type = Hybrid
>>NetBIOS Scope ID = (no value)
>>IP Routing Enabled = (no value)
>>WINS Proxy Enabled = (no value)
>>NetBIOS Resolution Uses DNS = true
>>
>>Adapter Information
>>Adapter = Intel (R) Pro Adapter
>>Adapter Address = 00-03-47-A1-7D-44
>>IP Address = 192.168.100.11
>>Subnet Mask = 255.255.0.0
>>Default Gateway = 192.268.100.1
>>DHCP Server = (no value)
>>Primary WINS Server = 192.168.100.2
>>Secondary WINS Server = (no value)
>>Lease Obtained = (no value)
>>Lease Expires = (no value)
>>
>>Note that the correct internal IP address for companyweb
>>is 192.168.10.2.
>>
>>Q. 2, Please understand that I am a business owner and
>>not a trained NA so I don't know if I did this
>>correctly. On the SBS server I went to Server
>>Management, Hompage, Advanced Management, WINS, Active
>>Registrations. This lists all the clients on the
>>network. For each client the server address =
>>192.168.100.2 and the owner = 192.168.100.2.
>>
>>Q. 3, I also have XP and W2000 clients; no problem
>>finding companyweb with these clients.
>>
>>Q. 4, not sure I understand this question. The config
is
>>as above. Where should the domain name be listed in
>>W98?
>>
>>I was reading some later posts to this newsgroup.
>>There's one from Pieter w/ a Belgian e-mail address.
>>Following a lead there, on my W98 clients, when I type
>>http://companyweb.mydomain.local in IE, then I am
>>prompted to enter the u/n, p/w, and domain. When I
enter
>>this info companyweb opens.
>>
>>Peter S.
>>>-----Original Message-----
>>>Hi Peter,
>>>
>>>Can you please post the winipcfg from that W98? Is Wins
>>installed on the
>>>server? Do you have other client OS's and do they have
>>the same problem? Is
>>>the SBS domain name listed in 2 places in the Network
>>Configuration of the
>>>W98?
>>>
>>>--
>>>Regards,
>>>
>>>Marina
>>>Microsoft SBS-MVP
>>>
>>>"Peter Schott" <anonymous@discussions.microsoft.com>
>>schreef in bericht
>>>news:556a01c480b5$fdfda170$a601280a@phx.gbl...
>>>It says "The page cannont be displayed." At the bottom
>>>of the screen it says "cannot find server or DNS error"
>>>
>>>Earlier I thought it might be an authentication
problem,
>>>so I enabled anonymous access in IIS. That did not
>work.
>>>I just read the book more carefully, maybe I also have
>>>change the Anonymous Access Settings page at
companyweb?
>>>
>>>Peter S.
>>>>-----Original Message-----
>>>>Peter,
>>>>
>>>>I have a feeling that it is realted to authentication.
>>>Does it say page not
>>>>found or you are not authorized?
>>>>
>>>>Cheers,
>>>>Jeff Loucks
>>>> Available Technology ®
>>>> Solutions For Professionals ®
>>>> www.availabletechnology.com
>>>>
>>>>
>>>>"Peter Schott" <anonymous@discussions.microsoft.com>
>>>wrote in message
>>>>news:527501c4808b$a2aeca30$a601280a@phx.gbl...
>>>>> Yes, the only DNS server listed is the internal IP
>>>>> address. No secondary DNS is listed.
>>>>>
>>>>> Peter S.
>>>>> >-----Original Message-----
>>>>> >Peter,
>>>>> > Is the SBS system's internal IP address the
only
>>>>> value listed for DNS
>>>>> >servers by the Windows 98 client? I've seen
>>>situations
>>>>> where
>>>>> >http://companyweb/ could not resolve when the
>clients
>>>>> had both a primary and
>>>>> >secondary DNS servers and for some reason were
>>>>> forwarding the request to the
>>>>> >secondary DNS which had no translation matrix for
>>>>> internal names like
>>>>> >companyweb.
>>>>> >--
>>>>> >Matt Clapham
>>>>> >Microsoft Corporation
>>>>> >
>>>>> >This posting is provided "AS IS" with no
warranties,
>>>and
>>>>> confers no rights.
>>>>> >
>>>>> >"Peter Schott"
<anonymous@discussions.microsoft.com>
>>>>> wrote in message
>>>>> >news:4a9f01c4806d$1e4ba100$a301280a@phx.gbl...
>>>>> >> OK, my Windows 98 clients can't resolve
companyweb
>>>to
>>>>> the
>>>>> >> internal IP address. If I run ipconfig /all on
>the
>>>>> >> client it shows the DNS Server as the correct
>>>internal
>>>>> IP
>>>>> >> address. Is this a Windows 98 problem? Is there
>>>way
>>>>> to
>>>>> >> resolve it short of upgrading my old clients?
>>>>> >>
>>>>> >> Thx.
>>>>> >>
>>>>> >> Peter S.
>>>>> >>
>>>>> >>
>>>>> >>>-----Original Message-----
>>>>> >>>Hello Peter
>>>>> >>>
>>>>> >>>Make sure the clients are all pointing to the
>Small
>>>>> >> Business Server for
>>>>> >>>DNS. If they cannot resolve the name they will
>fail
>>>to
>>>>> >> connect. The best
>>>>> >>>way to determine this is with PING companyweb.
>Make
>>>>> sure
>>>>> >> it resolves to the
>>>>> >>>internal address of the Small Business Server
>>>computer.
>>>>> >>>
>>>>> >>>Doug Boyd
>>>>> >>>
>>>>> >>>dboyd@online.Microsoft.com
>>>>> >>>This posting is provided "AS IS" with no
>>warranties,
>>>>> and
>>>>> >> confers no rights.
>>>>> >>>
>>>>> >>>.
>>>>> >>>
>>>>> >
>>>>> >
>>>>> >.
>>>>> >
>>>>
>>>>
>>>>.
>>>>
>>>
>>>
>>>.
>>>
>>
>>
>>.
>>
>
>
>.
>

Relevant Pages

  • Re: how to access remote CUPS printer?
    ... Something on a distant network? ... and you must have port 631 tcp and udp open on the CUPS server. ... they are not automatically seen by the clients. ... I got jack of the lot of those half-arsed configuration ...
    (Fedora)
  • Re: http://companyweb
    ... In W98 Control Panel, Network, TCP/IP, Properties, On the ... The settings on the WINS Configuration tab do not seem to ... the Firewall Client. ...
    (microsoft.public.windows.server.sbs)
  • Re: Publish server on intenal net
    ... as snat or firewall clients to your ISA server. ... you use for DMZ network is private and non-routable to the whole Internet, ... entered those addresses into the ISA configuration. ...
    (microsoft.public.isaserver)
  • Re: Publish server on intenal net
    ... as snat or firewall clients to your ISA server. ... you use for DMZ network is private and non-routable to the whole Internet, ... entered those addresses into the ISA configuration. ...
    (microsoft.public.isa)
  • Re: Anonymous User
    ... Windows IP Configuration ... Ethernet adapter Wireless Network Connection: ... "Kevin Longley" wrote: ... >>> the other hand if they are configured as securnat clients I would verify ...
    (microsoft.public.isa)