RE: Starting RRAS service returned ERROR 80070057?

From: Keith P. Rutledge [MSFT] (keithrut_at_online.microsoft.com)
Date: 07/30/04


Date: Fri, 30 Jul 2004 19:38:38 GMT

Hello,

the error 80070057 means: E_INVALIDARG

which means an invalid parameter. This could be caused by a broken part of
the tcp/ip stack.

You could reset the ip stack by running the following command:

netsh int ip reset c:\reset.txt

keep in mind that if you perform this command, that you will need to
re-enter the static ip addresses and other configuration's for your NIC's.

Regards,

Best Regards,

Keith Rutledge, MCSE NT4/2000
Microsoft Online Support Engineer
Get Secure! - www.microsoft.com/security

=====================================================
When responding to posts, please "Reply to Group" via
your newsreader so that others may learn and benefit
from your issue.
=====================================================
This posting is provided "AS IS" with no warranties, and confers no rights.



Relevant Pages

  • RE: Starting RRAS service returned ERROR 80070057?
    ... > the tcp/ip stack. ... > You could reset the ip stack by running the following command: ... > keep in mind that if you perform this command, ... > Best Regards, ...
    (microsoft.public.windows.server.sbs)
  • Re: tcp/ip stack problem?
    ... can you ping www.yahoo.com from a command ... to reset your tcp/ip stack. ...
    (borland.public.delphi.non-technical)
  • Re: SmallC
    ... to the host in the form of a 3-byte movement data packet (as described ... the counter is not incremented/decremented until it is reset. ... after the mouse receives any command from the host other than the ...
    (alt.lang.asm)
  • Re: uart testbench help
    ... startC, preset, reset); ... output reg resetC; ... //read an 8bit command from the reciever buffer, ... commands to start and reset signals ...
    (comp.lang.verilog)
  • Re: uart testbench help
    ... startC, preset, reset); ... output reg resetC; ... //read an 8bit command from the reciever buffer, ... commands to start and reset signals ...
    (comp.lang.verilog)

Quantcast