Re: First SBS server

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

From: Matt (anonymous_at_discussions.microsoft.com)
Date: 06/09/04


Date: Wed, 9 Jun 2004 13:37:35 -0700

No more than 10 at once. I chose the SATA drives because
the SCSI ones required an expensive RAID controller.

Matt
>How many clients will be connected to this server?

>-----Original Message-----
>Matt
>
>How many clients will be connected to this server? I
would probably opt for
>SCSI drives over SATA. But it depends on a lot of
factors. SATA is going
>to give you much more capacity for the $, but SCSI is
still a better
>performer in a server that gets hit alot by multiple
clients.
>
>Joe
>
>"Matt" <anonymous@discussions.microsoft.com> wrote in
message
>news:1a14801c44e52$fad5b1d0$a601280a@phx.gbl...
>> Hi, I am about to but my first SBS server (upgrading
peer
>> to peer network)and I was hoping to get some feedback
on
>> the system I am currently planning to buy.
>>
>> Here are the specs;
>> 2.8 Pentium
>> 1G RAM
>> SBS standard
>> 2 80 Gig SATA Hard Drives w/ Onboard SATA Controller
>> Onboard NIC
>> Intel Pro 1100s (2nd NIC)
>> 56K Data/fax modem
>> cd-rom
>>
>> I feel pretty good about this set up; I think the hard
>> drive configuration is the most confusing (many choices
>> IDE,SCSI, etc. Not to mention RAID configurations and
>> controllers. If any one has any input I would welcome
it.
>> TIA, Matt
>
>
>.
>



Relevant Pages

  • Re: separate hard drive for scratch disks for two different programs?
    ... measures out at a higher speed than the 750GB SATA ... much faster using the middle cylinders than the SCSI ... This is a function of the way the OS deals with the disk, ... of sharing the load between multiple drives, ...
    (rec.photo.digital.slr-systems)
  • Asus A7N8X-E w/SATA and SCSI, 4.10 sys install snafu
    ... Old buslogic SCSI controller with 2 drives, a cd, and a tape. ... and nt going off the sata drives. ... I configured the mobo to boot from cd first, ...
    (freebsd-questions)
  • Re: Hot Swapping a SATA drive in Windows 2000 and XP.
    ... Things showing up as SCSI is just odd. ... > put it in my SATA enclosure. ... > I even took my USB memory stick, and was able to format it as NTFS, ... > Do your SATA adapters and associated drives show up as SCSI devices? ...
    (microsoft.public.windowsxp.hardware)
  • Re: What do you use?
    ... I haven't used any SATA stuff yet. ... >>I can guarantee modern SCSI throughput is superior to any of the SATA ... you've got drives like the WD 'Raptor' ... so effectively need one channel per disk. ...
    (freebsd-questions)
  • Re: Hot Swapping a SATA drive in Windows 2000 and XP.
    ... knowledge) that designates add-on cards as SCSI but rather the system BIOS. ... this day if you choose to boot from a HD (IDE or SATA) which is attached to ... drives attached to the built-in promise controller will most probably ...
    (microsoft.public.windowsxp.hardware)