Re: VPN No Acess After Connection

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance

From: Marina Roos [SBS-MVP] (marina_at_roos.nodontwantspam.nl.com)
Date: 06/09/04 

Date: Wed, 9 Jun 2004 12:47:09 +0200

The local computer's IP range should be different from the remote server's. 

-- 
Regards,
Marina
Microsoft SBS-MVP
"Bernie Hunt" <bhunt@optonline.net> schreef in bericht
news:eISBnfdTEHA.1172@TK2MSFTNGP11.phx.gbl...
> I upgraded from SBS 2K to SBS 2K3. My remote client worked with the old
> server, so I'm suspecting its a problem with the configuration of my new
> server.
>
> I can make the VPN connection sucessfully. But once connected, I can't
> access anything. I have not name resolution and I can't ping the server.
> Here is my ipconfig info from the remote computer, when the VPN is active.
>
> Windows IP Configuration
>
>         Host Name . . . . . . . . . . . . : MARCO
>         Primary Dns Suffix  . . . . . . . :
>         Node Type . . . . . . . . . . . . : Hybrid
>         IP Routing Enabled. . . . . . . . : No
>         WINS Proxy Enabled. . . . . . . . : No
>
> Ethernet adapter Local Area Connection:
>
>         Connection-specific DNS Suffix  . :
>         Description . . . . . . . . . . . : Linksys LNE100TX(v5) Fast
> Ethernet A
> dapter
>         Physical Address. . . . . . . . . : 00-04-5A-86-50-95
>         Dhcp Enabled. . . . . . . . . . . : No
>         IP Address. . . . . . . . . . . . : 192.168.1.16
>         Subnet Mask . . . . . . . . . . . : 255.255.255.0
>         Default Gateway . . . . . . . . . : 192.168.1.1
>         DNS Servers . . . . . . . . . . . : 167.206.112.3
>                                             167.206.112.4
>
> PPP adapter TCO:
>
>         Connection-specific DNS Suffix  . :
>         Description . . . . . . . . . . . : WAN (PPP/SLIP) Interface
>         Physical Address. . . . . . . . . : 00-53-45-00-00-00
>         Dhcp Enabled. . . . . . . . . . . : No
>         IP Address. . . . . . . . . . . . : 192.168.1.14
>         Subnet Mask . . . . . . . . . . . : 255.255.255.255
>         Default Gateway . . . . . . . . . : 192.168.1.14
>         DNS Servers . . . . . . . . . . . : 192.168.1.11
>         Primary WINS Server . . . . . . . : 192.168.1.11
>
> My server's internal IP is 192.168.1.11, so the DNS and WINS looks
correct.
> The default gateway shouldn't be pointed back at my VPN IP. Any
suggestions
> on where to start troubleshooting this?
>
>
>

Relevant Pages

  • Re: Some Questions
    ... you may need to follow the steps below to configure VPN access ... And make sure you have typed the public FQDN of the SBS ... server on the Web Server Certificate page. ... log in and download Connection Manager. ...
    (microsoft.public.windows.server.sbs)
  • Re: Remote Access and ISA Server in SBS 2003?
    ... I am glad to hear the Remote Access Wizard is working fine now. ... there is no difference in VPN between SBS 4.5 and SBS ... Error Message: VPN Connection Error 800: Unable to Establish Connection ... the external NIC of the SBS Server. ...
    (microsoft.public.windows.server.sbs)
  • Re: Connecting a remote workstation to a domain
    ... If you have more than a couple of remote workstations connecting to the SBS ... server via VPN, you really need to consider a Terminal Server in the main ... "Log in using a dial up connection" checkbox, ... roaming profile then synchronizes with the server over the VPN); ...
    (microsoft.public.windows.server.sbs)
  • Re: RWW users disconnecting
    ... I have matched the screen resolutions on both the local PC and the remote ... have a temporary disconnection of the Internet for the local PC's. ... DSL connection for a VPN with our VoIP between locations and those are not ... going down during these "outages") that use the SBS server as a DNS server. ...
    (microsoft.public.windows.server.sbs)
  • Re: Another VPN Issue...Say it aint so...
    ... VPN as implemented by MS, is, or should be, a relatively simple beastie. ... The IP address of both nics in the SBS and the nic in the remote unit ... The add a network connection has been run on the remote. ...
    (microsoft.public.windows.server.sbs)