Re: Installing SBS2k3 CEICW Network Error
From: David Jones [MSFT] (dajones_at_online.microsoft.com)
Date: 06/04/04
- Next message: FrankPV: "Re: Can't install client applications"
- Previous message: Jimbo: "Re: VPN with Linksys"
- In reply to: Malcolm Cheyne: "Re: Installing SBS2k3 CEICW Network Error"
- Next in thread: Malcolm Cheyne: "Re: Installing SBS2k3 CEICW Network Error"
- Reply: Malcolm Cheyne: "Re: Installing SBS2k3 CEICW Network Error"
- Messages sorted by: [ date ] [ thread ]
Date: Fri, 4 Jun 2004 08:49:01 -0700
Hi Malcom,
It looks like your ADSL modem is also acting as a NAT router device, since
it's giving you a 192.168.0.xxx IP address and not a public Internet
address.
Could you please try the same steps to re-run the CEICW, but instead of
choosing Direct Broadband, try choosing "A local router device with an IP
address" instead? When it asks what the local IP address of router is,
enter 192.168.0.1 .
Leave the box talking about a single network connection unchecked, and
complete the wizard.
If it still gives errors, could you paste the new icwlog.txt?
>From the log you posted, it looks like the wizard was trying to do a couple
things based on having an actual public IP address, not one from a router
device, so I think this should take care of it.
David Jones
SBS Product Team
--
This posting is provided "AS IS" with no warranties, and confers no rights.
"Malcolm Cheyne" <vvaatvl@**NOSPAM**bigpond.net.au> wrote in message
news:%23y6l2kdSEHA.644@tk2msftngp13.phx.gbl...
> David here are the results from your suggestion. I can see *NO* errors.
>
> Setup as follows:
>
> Direct Broadband
> Internet 192.168.0.2 (DHCP)
> Internal LAN 192.168.16.2
> Preferred DNS 61.9.208.14 (Bigpond Qld)
> Firewall enabled.
>
> After running wizard contents of "icwlog.txt" is:
>
>
> 4/06/2004 11:55 AM
> C:\Program Files\Microsoft Windows Small Business
> Server\Networking\ICW\wizinet.dll, version 5.2.2651.0
> calling CNetCommit::ValidatePropertyBag ().
> Call to Querying for the property bag () returned ok.
> Call to Reading hardware selection () returned ok.
> Hardware selection: 0
> Call to Validating hardware selection () returned ok.
> Call to Reading LAN NIC Guid () returned ok.
> LAN NIC Guid: {2A0B2815-7EBE-4DE3-B7FB-DA280EAF487B}
> Call to Validating LAN NIC Guid () returned ok.
> Call to Validating NIC properties () returned ok.
> Broadband selection: 0
> Call to Validating broadband selection () returned ok.
> calling CNetCommit::ValidateFulltimeConnectionProperties ().
> Call to Reading LAN NIC Guid () returned ok.
> LAN NIC Guid: {2A0B2815-7EBE-4DE3-B7FB-DA280EAF487B}
> Call to Validating LAN NIC Guid () returned ok.
> Call to Reading 2nd NIC Guid () returned ok.
> External NIC Guid: {EB74A25A-BAEF-45FF-83FA-90F82BD054B8}
> Call to Validating external NIC Guid () returned ok.
> Call to Validating NIC properties () returned ok.
> Call to Reading Default Gateway () returned ok.
> Default Gateway: 192.168.0.1
> Call to Validating Default Gateway IP () returned ok.
> Call to Reading preferred DNS server IP () returned ok.
> Preferred DNS server: 61.9.208.14
> Call to Validating prefferred DNS server IP () returned ok.
> Call to Reading alternate DNS server IP () returned ok.
> Call to Validating preferred & alternate DNS servers () returned ok.
>
> 4/06/2004 11:55 AM
> C:\Program Files\Microsoft Windows Small Business
> Server\Networking\ICW\wizrfire.dll, version 5.2.2651.0
> calling CRFireCommit::ValidatePropertyBag (0xfca9c8).
> Call to Reading web publishing selection () returned ok.
> Call to Reading OWA publishing selection () returned ok.
> Call to Reading RUP publishing selection () returned ok.
> Call to Reading Monitoring publishing selection () returned ok.
> Call to Reading OMA publishing selection () returned ok.
> Call to Reading RPC publishing selection () returned ok.
> Call to Reading Companyweb publishing selection () returned ok.
> Call to Reading ROOT publishing selection () returned ok.
> Web publishing selections:
> OWA publishing: 1
> RUP publishing: 1
> Monitoring publishing: 1
> OMA publishing: 1
> RPC publishing: 1
> Companyweb publishing: 1
> ROOT publishing: 1
> Call to CRFireCommit::ValidatePropertyBag () returned ok.
>
> 4/06/2004 11:55 AM
> C:\Program Files\Microsoft Windows Small Business
> Server\Networking\ICW\wizcert.dll, version 5.2.2651.0
> Calling CCertCommit::ValidatePropertyBag
> Nothing is published, will not touch SSL Settings
> *** CCertCommit::ValidatePropertyBag returned ERROR 1
>
> 4/06/2004 11:55 AM
> C:\Program Files\Microsoft Windows Small Business
> Server\Networking\ICW\wizemail.dll, version 5.2.2651.0
> calling CEmailCommit::ValidatePropertyBag ().
> calling pdispPPPBag->QueryInterface (IPropertyPagePropertyBag, 0x6f558).
> Call to pdispPPPBag->QueryInterface () returned ok.
> calling ReadInt4 (0xfca9c8, DB5E5E45-3598-4F1D-8FF7-0ED35B9EB6A4).
> Call to ReadInt4 () returned ok.
> The out param of ReadInt4() is 1.
> calling CValidatePropertyUtil.ValidatePropertyInteger ().
> Call to CValidatePropertyUtil.ValidatePropertyInteger () returned ok.
> calling ReadBool (0xfca9c8, F71526DD-9C19-4fe9-B7DB-FD4360909275).
> Call to ReadBool () returned ok.
> The out param of ReadBool() is 1.
> calling CValidatePropertyUtil.ValidatePropertyBool ().
> Call to CValidatePropertyUtil.ValidatePropertyBool () returned ok.
> calling ReadBool (0xfca9c8, DB5E5E46-3598-4F1D-8FF7-0ED35B9EB6A4).
> Call to ReadBool () returned ok.
> The out param of ReadBool() is 0.
> calling CValidatePropertyUtil.ValidatePropertyBool ().
> Call to CValidatePropertyUtil.ValidatePropertyBool () returned ok.
> calling ReadBool (0xfca9c8, 1DB7A50F-98F8-452f-868B-1AAC56585DD0).
> Call to ReadBool () returned ok.
> The out param of ReadBool() is 1.
> calling CValidatePropertyUtil.ValidatePropertyBool ().
> Call to CValidatePropertyUtil.ValidatePropertyBool () returned ok.
> calling ReadInt4 (0xfca9c8, C9D8697B-0D4C-4767-8F1F-4CE415098774).
> Call to ReadInt4 () returned ok.
> The out param of ReadInt4() is 0x2.
> calling CValidatePropertyUtil.ValidatePropertyLong ().
> Call to CValidatePropertyUtil.ValidatePropertyLong () returned ok.
> calling ReadString (0xfca9c8, 01637C90-B142-41C4-8520-6B2E0F891BE7).
> Call to ReadString () returned ok.
> The out param of ReadString() is vvaatvl.org.au.
> calling ReadBool (0xfca9c8, 1DB7A50F-98F8-452f-868B-1AAC56585DD0).
> Call to ReadBool () returned ok.
> The out param of ReadBool() is 1.
> calling ReadInt4 (0xfca9c8, C9D8697B-0D4C-4767-8F1F-4CE415098774).
> Call to ReadInt4 () returned ok.
> The out param of ReadInt4() is 0x2.
> calling CValidatePropertyUtil.ValidatePropertyHostName ().
> Call to CValidatePropertyUtil.ValidatePropertyHostName () returned ok.
> calling AttachCommiter.Validate(pPPPBag) (0xfca9c8,
> 01637C90-B142-41C4-8520-6B2E0F891BE7).
> calling CAttachCommiter::Validate (0xfca9c8).
> calling CAttachCommiter::Validate:ReadVariant (0x0).
> calling CAttachCommiter::Validate:m_spDoc.CoCreateInstance (0x0).
> calling CAttachCommiter::Validate:m_spDoc->loadXML (0x0).
> Call to CAttachCommiter::Validate () returned ok.
> Call to CEMailCommit::ValidatePropertyBag () returned ok.
> calling CNetCommit::Commit (16558536).
> calling CNetCommit::ValidatePropertyBag ().
> Call to Querying for the property bag () returned ok.
> Property bag is not dirty, skipping validation
> calling CNetCommit::Common ().
> calling CNetCommit::GetLanNicInfo ().
> LAN NIC Guid: {2A0B2815-7EBE-4DE3-B7FB-DA280EAF487B}
> Call to Converting LAN NIC Guid () returned ok.
> Call to Getting IP address for the LAN NIC () returned ok.
> Call to Reading in the LAN NIC info () returned ok.
> Call to Fixing the TCP/IP NIC Binding order () returned ok.
> Dhcp server is installed and not disabled
> Call to Set DHCP Server to start up automatically () returned ok.
> DNS server is installed and not disabled
> Call to Changing startup type for DNS () returned ok.
> Call to Clearing DNS server entries on the LAN NIC () returned ok.
> Call to Setting DNS server IP for the LAN NIC () returned ok.
> Call to Resetting DNS recursion timeout () returned ok.
> Call to Resetting client dns query timouts in config.dat () returned ok.
> Call to DsGetDcName for local domain name () returned ok.
> Call to Installing RRAS (LAN) () returned ok.
> Call to Installing NAT () returned ok.
> Call to Clearing all static routes () returned ok.
> calling CNetCommit::DoFulltime ().
> Call to Converting external NIC guid () returned ok.
> Call to Clearing default gateway on the LAN NIC () returned ok.
> External NIC has a dhcp assigned default gateway, will not touch it
> Call to Setting DNS forwarders () returned ok.
> Call to Preparing for DNS listener reset () returned ok.
> Call to Resetting DNS listeners () returned ok.
> Call to Clearing DNS server entries on the external NIC () returned ok.
> Call to Making sure the DNS entries on the external NIC points to the
local
> DNS server () returned ok.
> Call to GetLocalDomainName () returned ok.
> Error 0x80072581 returned from call to Deleting the DNS record for the
> external NIC().
> Error 0x80072581 returned from call to CNetCommit::DoFulltime().
> Error 0x80072581 returned from call to Configuring for fulltime
> connection().
> Error 0x80072581 returned from call to CNetCommit::Common().
> Error 0x80072581 returned from call to CNetCommit::Commit().
> calling GetBOConnector ().
> Call to GetBOConnector () returned ok.
> calling spADs->PutEx (ADS_PROPERTY_CLEAR,
> msExchSmtpOutboundSecurityPassword).
> Call to spADs->PutEx () returned ok.
> calling spADs->SetInfo ().
> Call to spADs->SetInfo () returned ok.
>
>
> HTH
>
> Malcolm
>
>
>
> "David Jones [MSFT]" <dajones@online.microsoft.com> wrote in message
> news:utmr%23RYSEHA.3224@TK2MSFTNGP10.phx.gbl...
> > Hi Malcom,
> >
> > On the SBS server, find the directory "Program Files\Microsoft Windows
> Small
> > Business Server\Support"
> > Inside that directory there should be a file called "icwlog.txt".
Rename
> it
> > to something else, then re-run the CEICW.
> > icwlog.txt should reappear...could you post the contents of that file,
> > especially any errors that were in there?
> >
> > David Jones
> > SBS Product Team
> >
> > --
> > This posting is provided "AS IS" with no warranties, and confers no
> rights.
> >
> >
> > "Malcolm (vvaatvl)" <not@thistime.fred> wrote in message
> > news:%23MST06RSEHA.1388@TK2MSFTNGP09.phx.gbl...
> > > My system has two NICs. The external (Internet) NIC is connected
> directly
> > > to an ADSL modem using PPPoE. Account logon and password details are
> > > entered as part of the wizard. The internal NIC (LAN) is connected to
a
> > > Belkin54g Wireless Access Point. All this seems to be working
> correctly.
> > > My workstation is actually connected to the Internet (right now) after
> > > manually configured OE to get to this NG and websites.
> > >
> > > My server IP Address is the standard 192.168.16.2. My workstation is
> > > manually configured to 192.168.16.21 and the Belkin54g to
> 192.168.16.254.
> > >
> > > I am trying to install as standard as possible allowing wizards to do
> all
> > > the work. When I run the CEICW wizard my Broadband connection is via
> > PPPoE
> > > and I progress to the stage where the wizard starts to configure the
> > server
> > > (Network). After about 30 seconds the wizrd stops with the message
"An
> > > error occurred while configuring a component". I then cancel the
> wizard.
> > >
> > > I have tried various configurations, e.g. having the ADSL modem
> connected
> > to
> > > a CNet Gateway but the wizard always stops at the same place.
> > >
> > > It is not a big deal for me to wipe the HDD and start again. I am
using
> > > this time for practice and experience. In a couple of weeks we will
> have
> > a
> > > static IP and I will then run the wizard again.
> > >
> > > In the meantime any suggestions would be helpful.
> > >
> > > TIA
> > >
> > > Malcolm
> > >
> > >
> >
> >
>
>
- Next message: FrankPV: "Re: Can't install client applications"
- Previous message: Jimbo: "Re: VPN with Linksys"
- In reply to: Malcolm Cheyne: "Re: Installing SBS2k3 CEICW Network Error"
- Next in thread: Malcolm Cheyne: "Re: Installing SBS2k3 CEICW Network Error"
- Reply: Malcolm Cheyne: "Re: Installing SBS2k3 CEICW Network Error"
- Messages sorted by: [ date ] [ thread ]
Relevant Pages
|
