Re: SBS 2003 - FrontPage 2003 can not connect to site on Internet

From: Eriq Neale [MSFT] (a-eriqn_at_online.microsoft.com)
Date: 05/25/04 

Date: Tue, 25 May 2004 14:35:08 GMT

| From: "Scott Buerkley" <Scott_Buerkley@Yahoo.com>
|
| I pasted the config /all below and I do not know what you mean by
forwarding
| the ports, so maybe we did not do that. Where do I go to look at that?

Hello Scott. See my comments below...

| Ethernet adapter Server Local Area Connection:
|
| Connection-specific DNS Suffix . :
| Description . . . . . . . . . . . : Intel(R) PRO/1000 MT Network
| Connection
| Physical Address. . . . . . . . . : 00-C0-9F-20-18-A5
| DHCP Enabled. . . . . . . . . . . : No
| IP Address. . . . . . . . . . . . : 192.168.16.2
| Subnet Mask . . . . . . . . . . . : 255.255.255.0
| Default Gateway . . . . . . . . . :
| DNS Servers . . . . . . . . . . . : 192.168.16.2
| Primary WINS Server . . . . . . . : 192.168.16.2

This configuration is correct.

| Ethernet adapter Internet Connection:
|
| Connection-specific DNS Suffix . :
| Description . . . . . . . . . . . : Intel(R) PRO/1000 MT Desktop
Adapter
| Physical Address. . . . . . . . . : 00-07-E9-39-28-6C
| DHCP Enabled. . . . . . . . . . . : No
| IP Address. . . . . . . . . . . . : 208.38.79.99
| Subnet Mask . . . . . . . . . . . : 255.255.255.0
| Default Gateway . . . . . . . . . : 208.38.79.254
| DNS Servers . . . . . . . . . . . : 204.221.28.6
| 208.38.65.35
| Primary WINS Server . . . . . . . : 192.168.16.2
| NetBIOS over Tcpip. . . . . . . . : Disabled

This configuration is not. Both NICs in the server need to point to the
internal IP (in this case, 192.168.16.2) for DNS. Remove both IP addresses
from the Internet Connection DNS settings and replace them with
192.168.16.2. To make sure that DNS is resolving correctly, open the DNS
Management console from the Administrative Tools program folder (or type in
'dnsmgmt.msc" at a command prompt), right-click on the server name and
select Properties, click on the Forwarders tab, and make sure that your
ISPs DNS servers are listed in there. You can also click on the Monitoring
tab in DNS, check both the "simple query against this DNS server" and
"recursive query to other DNS servers" checkboxes and click Test Now. You
should get a line in the test results window that shows PASS under both
Simple Query and Recursive Query. Making this DNS change on your external
NIC will also significantly reduce the amount of time the server takes to
boot up.

As to the original problem, what exactly are you trying to accomplish? Are
you running FrontPage on a PC inside the SBS network and you are unable to
access web pages through FrontPage that are hosted on servers outside of
your network? If so, have you installed the Firewall Client on the
workstations? It sounds like the client is not installed and running on the
workstation, if this describes your scenario.

If not, please describe the situation in more detail so we can help bring
you to a resolution.

Eriq Neale, MCP
Microsoft Corporation

Get Secure! - www.microsoft.com/security

=====================================================
When responding to posts, please "Reply to Group" via
your newsreader so that others may learn and benefit
from your issue.
=====================================================
This posting is provided "AS IS" with no warranties, and confers no rights.

Relevant Pages

  • DNS vulnerabilities in shared host environments
    ... A potential vulnerability in the use of DNS exists in some shared ... Note that cPanel's default configuration does limit this ... however many shared hosting providers alter the ... for that domain is created on the shared hosts DNS server. ...
    (Bugtraq)
  • Re: 70-294 next week
    ... to another DNS ... server for at least ... client, which then ... configuration on the client. ...
    (microsoft.public.cert.exam.mcse)
  • Re: Still strange not fully working DNS server
    ... If nothing helps I guess the only optuin is to reinstall server, ... Ive removed that just a few hours ago and the GPO and DNS problem ... I also have disjoined and rejoined the client to the domain with ... Computer configuration, administrative templates, System, ...
    (microsoft.public.windows.server.dns)
  • Re: Not able to create user/ group accounts in Exchange server
    ... configuration in offline. ... Installed win2k on new hardware server along with ... DNS and executed dcpromo and then moved roles from ... The File Replication Service is having trouble enabling ...
    (microsoft.public.exchange2000.active.directory.integration)
  • Issues migrating SBS 2003 domain to Server 2008 Standard
    ... We are stuck migrating our SBS 2003 domain to Server 2008. ... Fatal Error:DsGetDcName (SRV-EXCH) call failed, ... Verify your Domain Name Sysytem (DNS) is ... network connectivity to a domain controller. ...
    (microsoft.public.windows.server.sbs)