Re: Help -- MS Exchange Services have stopped

From: Merv Porter [SBS-MVP] (mwport_at_hotmail.com_no_spam)
Date: 04/11/04


Date: Sun, 11 Apr 2004 08:41:42 -0500

Just a thought... re-run CEICW and then reboot. And I would recommend that
you configure your network to use that second NIC, especially if you don't
have have a high end firewall router.

-- 
Merv  Porter  [SBS MVP]
===================================
"Susan" <anonymous@discussions.microsoft.com> wrote in message
news:182f301c41f95$a96986f0$a601280a@phx.gbl...
> Sorry to keep bothering you.
>
> Yes, the messages continue.  And I don't believe that
> Exchange server is running anymore, bu I can't figure out
> how to restart it.
>
> As far as added software, I added a faxmodem tonight and
> configured fax services.  I also have a secon nic card
> that is not being used (and kept disabled)
>
>
> >-----Original Message-----
> >A single error like that is okay... do you continue to
> get that error?
> >
> >Keep scrolling down... look for other errors?
> >What did you install on this box?
> >Are the exchange serivces running?
> >
> >Is Remote procedure services in the "starting" mode but
> isn't started?
> >
> >Susan Tylie wrote:
> >
> >> Rebooting didn't work.  Here's a message that I've
> been
> >> getting for a while now ...
> >>
> >> The DHCP service has detected that it is running on a
> DC
> >> and has  no credentials configured for use with
> Dynamic
> >> DNS registrations  initiated by the DHCP service.
> This
> >> is not a recommended security configuration.
> >> Credentials for Dynamic DNS registrations may be
> >> configured using the command line "netsh dhcp server
> set
> >> dnscredentials" or via the  DHCP Administrative tool.
> >>
> >>
> >>
> >>
> >>
> >>>-----Original Message-----
> >>>That's okay.  Is your DHCP server not running?
> >>>
> >>>Have you tried just rebooting your server?
> >>>
> >>>Susan Tylie wrote:
> >>>
> >>>>When I look at status, I see a critical warning
> >>
> >> showing
> >>
> >>>>that my default MS Exchange services have stopped.
> >>
> >> When
> >>
> >>>>I drill down, it shows that the MS Exchange MTA
> stacks
> >>
> >> is
> >>
> >>>>the only default item that is "stopped".
> >>>>
> >>>>In addition, The DHCP server is not connecting ...
> and
> >>>>when users pull up MS Outlook, they are not
> connecting
> >>>>due to the "exchange" issues.
> >>>>
> >>>>As I said, I'm at a real loss.
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>>-----Original Message-----
> >>>>>Are you running low on disk space on the disk where
> >>>>
> >>>>Exchange is installed?
> >>>>
> >>>>
> >>>>>This may be the cause.
> >>>>>
> >>>>>Can you post the exact error message?
> >>>>>
> >>>>>-- 
> >>>>>Merv  Porter  [SBS MVP]
> >>>>>===================================
> >>>>>"Susan Tylie" <anonymous@discussions.microsoft.com>
> >>>>
> >>>>wrote in message
> >>>>
> >>>>
> >>>>>news:1af3501c41f79$0e861a70$a401280a@phx.gbl...
> >>>>>
> >>>>>
> >>>>>>I received a critical error saying that the MTA
> stacks
> >>>>>>had stopped running, which shut down exchange.  I
> >>
> >> don't
> >>
> >>>>>>have a clue about what to do.  I just know that it's
> >>>>>>obviously screwing up the rest of the server and
> >>
> >> client
> >>
> >>>>>>logins.  Help a newbie, please.  Thanks.
> >>>>>
> >>>>>
> >>>>>.
> >>>>>
> >>>
> >>>-- 
> >>>http://www.sbslinks.com/really.htm
> >>>
> >>>.
> >>>
> >
> >-- 
> >http://www.sbslinks.com/really.htm
> >
> >.
> >


Relevant Pages

  • Re: Network stops after time
    ... The DHCP server is a part of the DSL modem I believe. ... > the IP configuration UI or IPCONFIG /ALL after some time? ... > able to update your profile and access the the partner newsgroups. ...
    (microsoft.public.windowsxp.network_web)
  • Re: Time Capsule configuration problem
    ... It's a NetGear DM111P if that makes any difference. ... The Netgear modem's DHCP server should be turned off. ... Utility manual configuration.) ... The Time Capsule must be set to "Share a public IP address" (setting ...
    (uk.comp.sys.mac)
  • DHCP server not found: autoconfiguration IP addr.
    ... laptop connected directly to cable modem, ... the error DHCP server not found results. ... I installed a wireless router, ... Windows 2000 IP Configuration ...
    (microsoft.public.win2000.networking)
  • Re: Time Capsule configuration problem
    ... It's a NetGear DM111P if that makes any difference. ... a summary of the configuration you will need to set up is as ... The Netgear modem's DHCP server should be turned off. ... The Time Capsule must be set to "Share a public IP address" (setting ...
    (uk.comp.sys.mac)
  • Re: Need to you IFUP each time I restart!!!!!
    ... >>My Linux guest network configuration is set using DHCP since I run my ... When my Linux guest first boots and loads ... >>up it is able to automatically configured by the DHCP server, however, ... >>it was before I did the IFDOWN and IFUP. ...
    (comp.os.linux.networking)