Re: Remote access
From: Chris Jones (cka691_at_alltel.net)
Date: 03/31/04
- Next message: Tony Brough: "Default Administrator settings"
- Previous message: Javier Gomez [SBS MVP]: "Re: sbs2003 and Zone Alarm"
- In reply to: Greg: "RE: Remote access"
- Messages sorted by: [ date ] [ thread ]
Date: Wed, 31 Mar 2004 15:51:15 -0500
RDP should be enabled by default, it was on my machines. You may also check
your TCP settings, I had a problem when I changed my gateway address from
the Server to a new gateway, not sure if its related but I remember
something about it.
"Greg" <anonymous@discussions.microsoft.com> wrote in message
news:166e101c4175a$d6ec4380$a301280a@phx.gbl...
>
> >-----Original Message-----
> >Greg,
> >
> >In order to use RWW for your internal machines, you will
> need to set up
> >remote access to work internally first. This requires
> you to enable it on
> >the workstation in the system applet in the control
> panel (use the remote
> >tab). You will also wnat to be certain to have an
> administrator password
> >on your workstation. Be sure to add the users that are
> allowed to remote
> >in to the workstation from the domain.
> >
> >With that out of the way, test your configuration from
> the server. If you
> >can RDP to an XP machine from the server, you should be
> able to use it over
> >RWW, unless you don't have port 4125 enabled on your
> firewall.
> >
> >The remote configuration disk that you made for your
> home PC is for VPN.
> >If you have enabled VPN on your server, you would
> probably not get that
> >error.
> >
> >A good site to check out for finding out information is
> >http://www.microsoft.com/technet
> >
> >Robert King
> >Microsoft Product Support Specialist
> >This posting is provided "AS IS" with no warranties, and
> confers no rights.
> >
> >--------------------
> >|
> >| When I connect to my SBS 2K3 remotely...I can only see
> >| the server and none of my desktops.
> >|
> >| https://servername.mydomain.com/remote
> >|
> >| When I try to connect thru the shortcut on my desktop
> at
> >| home (created w/ a Remote Configuration disk)...I
> receive
> >| an 800 error.
> >|
> >| Thank you.
> >|
> >| greg
> >|
> >
> >.
> >Thanks Robert...will this not work with 2K Professional
> workstations?
>
> Greg
--- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.622 / Virus Database: 400 - Release Date: 3/13/2004
- Next message: Tony Brough: "Default Administrator settings"
- Previous message: Javier Gomez [SBS MVP]: "Re: sbs2003 and Zone Alarm"
- In reply to: Greg: "RE: Remote access"
- Messages sorted by: [ date ] [ thread ]
Relevant Pages
|
