SBS cannot browse internet

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

anonymous_at_discussions.microsoft.com
Date: 02/25/04 

Date: Tue, 24 Feb 2004 23:29:38 -0800

If the SBS 2000 uses ISA server, you should check
that the client computers are configured correctly
with the server name or internal IP address of the server
(in a 2 nic case) and port 8080 in the LAN settings of the
Internet explorer.

You should also check how ISA is configured.

You can also do "Telnet ipaddress 80" from a client
to see if a connection could be made to a remote or
internal web server at all.

I suggest you first try to connect via the browser to
an internal web site and see if it works.
You got to give mode details regarding the network
configuration for others to help.

Liran Zamir
Getronics Israel
>-----Original Message-----
>Hi All,
>Im having troubles with a clients W2K SBS. Initially when
>it was built, it could browse the net fine. Now it can't
>load a page. The client PC's are fine, as they can surf
>the net no worries. This problem seems to have arisen
>aftr I installed SP3. When a request from the browser is
>made, the page will resolve to the correct address, but
>will not display. It comes back with a DNS error. I can
>ping any Internet address - no problems there. I have
>asked this question on many forums, but everyone seems
>stumped. I have rebuilt this system twice - and each time
>after approx 1 month, this error will occur.
>
>Any help on this problem would be greatly appreciated.
>
>Cheers,
>
>Paul
>.
>

Relevant Pages

  • Re: RWW Disconnecting
    ... I have been connected from a remote site for about 3 ... DHCP server and even a wireless access ... the key codes to for Internet access. ... Client Workstations} ...
    (microsoft.public.windows.server.sbs)
  • Re: RWW Disconnecting
    ... Server to test the issue. ... I understand that remote client encounts following error message when RWW ... I strongly suggest that we rerun the Configure E-mail and Internet ...
    (microsoft.public.windows.server.sbs)
  • RE: Error.htm when using connectcomputer
    ... On the SBS server, run Set Up Computer Wizard to create all the remote ... Under Client Applications, uncheck everything except ... Start Internet Explorer. ...
    (microsoft.public.windows.server.sbs)
  • Re: RWW Disconnecting
    ... I understand that remote client encounts following error message when RWW ... I strongly suggest that we rerun the Configure E-mail and Internet ... 825763 How to configure Internet access in Windows Small Business Server ...
    (microsoft.public.windows.server.sbs)
  • RE: ISA blocking some client internet access?
    ... and installed ISA Server 2004, the internal clients cannot browse the ... address and external IP address of the SBS Server are in the same subnet ... Open the Server management console, navigate to "Internet and E-mail", ... On the client side, type NSLOOKUP from the command prompt, then input ...
    (microsoft.public.windows.server.sbs)