RE: SBS2003 Standard VPN connection does not work

From: gurpreet sawhney (anonymous_at_discussions.microsoft.com)
Date: 02/18/04 

Date: Wed, 18 Feb 2004 08:42:04 -0800

Thanks for the reply.
I have the sbs2003 with 2 nic cards there are no routers.
One of the nic cards is connected to the external
interface and the other has a local ip.
I can connect to outlook exchange over the web.
When I try to VPN in the keeps on trying to authenticate
and give up after 40 or so tries.
I installed the sbs 2003 standard last week and ran
through the remote access wizards.
The user is in the power user and moble user group.
Regards

>-----Original Message-----
>Do you get an error message that the password is invalid
or does the
>connection time out while verifying username and
password?
>
>If the connection times out while verifying username and
password, the most
>likely cause of this is that the GRE protocol is not
getting through to the
>server. Do you happen to have a router device between
the server and the
>internet that could be blocking it?
>
>As a test, you can try to establish a VPN connection
from the server itself
>to the external IP address of the server and see if it
can authenticate you.
>
>Chris Puckett, MCSE
>Microsoft Small Business Server Support
>
>
>This posting is provided "AS IS" with no warranties, and
confers no rights.
>
>.
>

Relevant Pages

  • Re: Outgoing POP3 email missing/lost/not received
    ... Funny thing is that I have had this ISP for 8 years and it has always been ... It looks like when you last ran CEICW, you set the ISP's mail server to: ... Internet Connection Wizard. ... After the wizard completes, the following network connection ...
    (microsoft.public.windows.server.sbs)
  • Re: Cannot connect client to server 2003
    ... you need to reconfigure the IP schema of your SBS ... On the SBS 2003 Server open the Server Management console. ... On the Connection Type page, click Broadband, and then click Next. ... Alternate DNS server, type the IP addresses that are provided by your ISP ...
    (microsoft.public.windows.server.sbs)
  • Re: Outgoing POP3 email missing/lost/not received
    ... ISP's mail server instead of the domain name on the ... SUMMARY OF SETTINGS FOR CONFIGURE E-MAIL AND INTERNET ... Internet Connection Wizard. ... After the wizard completes, the following network connection ...
    (microsoft.public.windows.server.sbs)
  • Re: Networking Question - VLANs on SBS 2003 Premium SP1
    ... port on the old router so I now have a segregated WLAN. ... be sure you do not enable any DHCP server in internal network. ... On the Connection Type page, click Broadband, and then click Next. ... On the Network Connection, You must enable and configure the network ...
    (microsoft.public.windows.server.sbs)
  • Re: Still cant connect to RWW or OWA remotely
    ... it certainly appears to be something about the SBS configuration. ... Meridian.local Ethernet adapter Local Area Connection: ... Windows SMALL BUSINESS SERVER 2003 Windows IP Configuration ... 192.168.254.254) directly to a port on the router and then ...
    (microsoft.public.windows.server.sbs)
Quantcast