Re: Verify problems on SBS2003

From: Jan Chlebek (johnson_at_atlas.cz)
Date: 02/18/04


Date: Wed, 18 Feb 2004 03:09:05 -0800

I use HP DAT 72 tape drive and two SCSI controllers: HP
SmartArray 641 for RAID and Compaq 64-bit/66MHz Wide
Ultra3 SCSI adapter for the tape (this one came with the
server). The whole box is a ProLiant ML330 server.

Thanks!

>-----Original Message-----
>what's the hardware you are using with the tape drive and
what not...
>
>Jan Chlebek wrote:
>
>> I have the following problem with backup: I used the
>> wizard to set up backup to a SCSI DAT tape. Everything
>> goes fine until verify. When verify proces starts,
after
>> few minutes the whole process stops saying "Backup
>> failed" and in the log-file there is a
>> message "Inconsistency Was Encountered on the Requested
>> Media". I don't think it is because of changed data
>> because in that case the process should go on until all
>> data is verified and than it shoud say how many files
>> were different. In my case the whole backup (20GB)
takes
>> two hours and verify quits with above error after few
>> minutes... Any ideas?
>
>--
>http://www.sbslinks.com/really.htm
>
>.
>



Relevant Pages

  • Re: Openserver 6 HP DAT72 Problems tar: tape read error TaA RESERVED
    ... This particular machine has Serial SCSI in addition to the builtin SCSI ... the tape drive is on the builtin SCSI. ... If it doesn't verify it's probably not backing up. ... I'd make changes, and also do data transfers, and then backup to ...
    (comp.unix.sco.misc)
  • Restoring a DAT backup on win2k?
    ... The backup is performed in a form of tar backup. ... How about buying a external SCSI case and having an internal DAT ... How would such a case+DAT be recognized from a Win2k system? ...
    (comp.os.linux.security)
  • SCSI Clearout
    ... Diamond Fireport 40 SCSI Card NOT XP ... HP 35470 SCSI DDS1 DAT Internal ... Iomega 100Mb Zip Drive SCSI Internal Beige ... Maxell/Sony/HP 90M DDS2 DAT Tapes ...
    (uk.adverts.computer)
  • Re: SCSI Tape Drives
    ... Does it matter what SCSI ID's are used? ... Try the AIT w/out the DAT and see if it's recognized by the Adaptect ... > Controller, ...
    (comp.periphs.scsi)
  • Re: SCSI Tape Drives
    ... Does it matter what SCSI ID's are used? ... Try the AIT w/out the DAT and see if it's recognized by the Adaptect ... > Controller, ...
    (comp.periphs.scsi)