Re: Setting up Exchange
From: Henry Craven (IUnknown_at_d.com)
Date: 02/17/04
- Next message: Kenneth Conklin: "Microsoft fax routing"
- Previous message: root: "Re: Raid and SBS 2003"
- In reply to: Les Connor [SBS MVP]: "Re: Setting up Exchange"
- Next in thread: Todd: "Re: Setting up Exchange"
- Messages sorted by: [ date ] [ thread ]
Date: Tue, 17 Feb 2004 11:46:42 +1100
Personally, I uncheck it once I've confirmed that the settings are as
required to ensure it remains locked in.
YMMV but I used to find the system changed the settings incorrectly and
so have gotten into the habit of locking them in.
You're right about making SBS Exchange Authoritative for the Local
domain only, but I was leaving checking that and other settings for
further down the track.
--
Henry Craven. SBS-MVP
"Les Connor [SBS MVP]" <les.connor@DEL.cfive.ca> wrote in message
news:unje9mO9DHA.1596@TK2MSFTNGP10.phx.gbl...
> >Also ensure that the "Automatically Update...based on recipient
> >policies" is Unchecked or we'll be running round in circles.
>
> Perhaps I missed something, if so I apologize. But I would leave this
> checked, because all users need the .rr addy.
>
> The part you want unchecked is 'authoratative for this domain',
meaning that
> your sbs is *not* authoritative, then any non matching .rr addresses
will
> flow out. No?
>
> backing up to the top now ;-| (sorry),
>
> For sure though, the error must be addressed first - it's not clear
which
> component is failing but it should be possible to find it in the
logfile if
> the wizard doesn't actually tell you which component.
>
> Look for icw.log in C:\Program Files\Microsoft Windows Small Business
> Server\Support. There will be a hint in there.
>
> --
> Les Connor [SBS MVP]
> -------------------------------------
> SBS Rocks !
>
>
>
> "Henry Craven" <IUnknown@d.com> wrote in message
> news:#EKozTO9DHA.1504@TK2MSFTNGP12.phx.gbl...
> > That "Error configuring components has me concerned"
> > there obviously shouldn't be one, so we need to address that first.
> >
> > I take it that the SBS setup went well. without error.
> > Have you checked the event logs for errors, particularly those
relating
> > to exchange ?
> > Have you checked that the exchange services are started and running
(
> > Admin Tools Services ) ?
> > If there are problems we need to clean those up first.
> >
> > - Outward mail is always SMTP. PoP3 is Pickup only.
> >
> > - The Clients Outlook should be configured to access their account
on
> > the SBS Exchange Server, so there is no need to change any settings
> > there. We're only concerned with configuring Exchange to send mail
to
> > the ISPs SMTP server, or directly to the Local Mailboxes for local
users
> > and configuring the POP3 connector on the server to collect e'Mail
from
> > your ISP and route it to the local mailboxes. - so, providing the
> > outlook clients were configured to -only- connect to the sbs
Exchange
> > server all should be well on that end.
> >
> > One thing I can see from the Mail Header is that you have the local
> > domain set as the default return address xxxx@smallbusiness.local
When
> > the CEICS wiz asks for the e'Mail domain it should be your ISPs Mail
> > Domain, rr.com and not your local LAN Domain.
> >
> > You should check that the User Account has both a
smallbusiness.local
> > SMTP e'mail address, and the rr.com SMTP address - which should be
set
> > as the default -
> >
> > Also ensure that the "Automatically Update...based on recipient
> > policies" is Unchecked or we'll be running round in circles.
> >
> > Now, when you say you cannot receive email on client PCs, is that
Local
> > Mail, or Internet mail ?
> >
> > So let's see where this gets us.
> > as the saying goes " Slowly, slowly, catchee monkey."
> >
> > --
> > Henry Craven. SBS-MVP
> >
> >
> > "Todd" <anonymous@discussions.microsoft.com> wrote in message
> > news:113e901c3f4b9$c8151da0$a401280a@phx.gbl...
> > > I'm still unable to get Exchange working properly. I ran
> > > the CEICW again, and set it to connect to my ISP's
> > > (Roadrunner) mail server, and to use 'connectors'. I'm
> > > still getting the same error message ("An error occurred
> > > while configuring a component"), before the wizard
> > > completes, and am unable to RECEIVE (but can send) email
> > > on client PC's.
> > >
> > > * Stupid question: Should email be forwarded to the SMTP
> > > server or POP server?? As shown below, I currently have
> > > it set to go to Roadrunner's SMTP server.
> > >
> > > * Another stupid question: After re-running the CEICW
> > > (making configuration changes), is it necessary to re-run
> > > the client connection wizard on the client PC's?
> > >
> > > Here are the new settings, as configured in the CEICW:
> > >
> > > E-mail delivery:
> > > Route email to the internet via the following email server
> > > at your ISP: smtp-server.houston.rr.com
> > >
> > > E-mail retrieval:
> > > Use the Microsoft Connector for POP3 Mailboxes to retrieve
> > > email from POP3 mailboxes.
> > >
> > > Retrieve email using the MS Connector for POP3
> > > Mailboxes from the following POP3 accounts:
> > >
> > > User Mailbox ... xxx
> > > User Mailbox ... xxx
> > > User Mailbox ... xxx
> > > User Mailbox ... xxx
> > > User Mailbox ... xxx
> > >
> > > (All mailboxes were configured using the MS connector,
> > > and all of the properties appear to be correct.)
> > >
> > > Also, if it helps, here is the header info on a test email
> > > that I sent from one of the client PC's:
> > >
> > > X-Apparently-To: altxxx@yahoo.com via 216.136.xxx.xxx;
> > > Mon, 16 Feb 2004 10:09:27 -0800
> > > Return-Path: <michael@smallbusiness.local>
> > > Received: from 24.174.xx.xx (EHLO
> > > cartwright.smallbusiness.local) (24.174.xx.xx) by
> > > mta238.mail.scd.yahoo.com with SMTP; Mon, 16 Feb 2004
> > > 10:09:25 -0800
> > > Subject: Test
> > > Date: Mon, 16 Feb 2004 12:10:23 -0600
> > > Message-ID:
> > > <50C7A33979B6A94CA8666F1B33D364E66F11@cartwright>
> > > X-MS-Has-Attach:
> > > MIME-Version: 1.0
> > > Content-Type: multipart/alternative; boundary="----
> > > _=_NextPart_001_01C3F4B7.FDFF41A4"
> > > X-MS-TNEF-Correlator:
> > > Thread-Topic: Test
> > > thread-index: AcP0uCWi9s0Z4gjcSWe4TXK/xNzA2w==
> > > Content-class: urn:content-classes:message
> > > From: "Michael" <Michael@smallbusiness.local> Add to
> > > Address Book
> > > X-MimeOLE: Produced By Microsoft Exchange V6.5.6944.0
> > > To: altxxx@yahoo.com
> > > Content-Length: 912
> > >
> > > Thanks,
> > > Todd
> >
> >
> >
>
>
- Next message: Kenneth Conklin: "Microsoft fax routing"
- Previous message: root: "Re: Raid and SBS 2003"
- In reply to: Les Connor [SBS MVP]: "Re: Setting up Exchange"
- Next in thread: Todd: "Re: Setting up Exchange"
- Messages sorted by: [ date ] [ thread ]
Relevant Pages
|
