Re: Accessin local computers using RDP while connected to VPN

Hello,

Although I'm not the OP, that was a good explanation. Helped me too.

If I wanted to change that on my own system, I take it the setting is as
follows ?

Right-click VPN icon and choose Properties.

Choose 'Networking' tab.

Choose 'Internet Protocol Version 4'

Choose Properties

Choose Advanced

Uncheck 'Use default gateway on remote network'.


Regards,

Nrth.




On Fri, 6 Mar 2009 22:42:05 -0000, "Anthony [MVP]" <anthony@xxxxxxxxxxxx>
wrote:

It is called "Split Tunneling When you create the VPN connection, it
replaces the normal network connection. It has a new network address and
gateway, and by default all traffic goes over the VPN. The VPN remote
gateway has no idea where your local resources are and is unable to find
them.
When you allow split tunneling you define, for example, that 10.* traffic
should go down the tunnel but anything else e.g. an internet address) should
use the normal network connection with the normal gateway e.g. your local
network router. This is able to find your local resources.
Hope that helps,
Anthony,
http://www.airdesk.com


"Tmack" <Tmack@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:9CD58C47-3077-46C1-8964-5D792FEB2C24@xxxxxxxxxxxxxxxx
Hi guys,

I work from home and have to be connected to my companies VPN to work. I
want to access some other computers in my house using remote desktop. I am
able to access other computers until I sign-on to the VPN then I'm no
longer
able to access the other computers.

Any ideas?

Routing Table:

xx = the same value for every instance in the table, eg, 21
xxx = a different vaule than xx

IPv4 Route Table
===========================================================================
Active Routes:
Network Destination Netmask Gateway Interface
Metric
0.0.0.0 0.0.0.0 192.168.1.1
192.168.1.2 4235
0.0.0.0 0.0.0.0 On-link
16.213.74.xx 11
15.195.201.xx 255.255.255.255 192.168.1.1 192.168.1.2
4236
16.213.74.xx 255.255.255.255 On-link
16.213.74.xx 266
127.0.0.0 255.0.0.0 On-link
127.0.0.1 4531
127.0.0.1 255.255.255.255 On-link
127.0.0.1 4531
127.255.255.255 255.255.255.255 On-link 127.0.0.1
4531
192.168.1.0 255.255.255.0 On-link
16.213.74.xx 30
192.168.1.2 255.255.255.255 On-link
192.168.1.2 4491
192.168.1.255 255.255.255.255 On-link
16.213.74.xx 266
224.0.0.0 240.0.0.0 On-link
127.0.0.1 4531
224.0.0.0 240.0.0.0 On-link
192.168.1.2 4492
224.0.0.0 240.0.0.0 On-link
16.213.74.xx 11
255.255.255.255 255.255.255.255 On-link 127.0.0.1
4531
255.255.255.255 255.255.255.255 On-link
192.168.1.2
4491
255.255.255.255 255.255.255.255 On-link
16.213.74.xx
266
===========================================================================
Persistent Routes:
None

IPv6 Route Table
===========================================================================
Active Routes:
If Metric Network Destination Gateway
1 306 ::1/128 On-link
1 306 ff00::/8 On-link
===========================================================================
Persistent Routes:
None

Thanks,

.

Relevant Pages

  • Re: MSN Messenger while on VPN
    ... The property "Use default gateway on the remote network" makes use of the ... VPN server as the default gateway and routes all the traffic. ... MSN ...
    (microsoft.public.isa.vpn)
  • Re: VPN routing from NAT to NAT
    ... You have two routes to the 192.168.1.0 network using different ... think you are connecting to the 192.168.1.125 gateway is that it is ... VPN connections are finicky depending on your exact network ... >it is a remote machine and not on my 100BaseTX LAN. ...
    (microsoft.public.windowsxp.work_remotely)
  • Re: RASd in : why traffic sent through VPN router ?
    ... inet gateway to 10+ secs when routed through remote VPN inet gateway. ... Exchange Server on the local network, ...
    (microsoft.public.windowsxp.network_web)
  • Re: Win2K3 end point routers on separate Win2K3 networks
    ... to the Win2K3 VPN router (if and only if that traffic is ... the VPN server as thier default gateway - but I do NOT ... that article were based upon a peer to peer network, ...
    (microsoft.public.windows.server.networking)
  • Re: Default Gateway on VPN subnets
    ... Now I understand that you are using the TZ170 VPN routers to establish the ... Once the default gateway of the remote 2003 server was automatically ... to access the internet or the SBS network? ...
    (microsoft.public.windows.server.sbs)