Re: 1 PC can't find domain controller

Even though it seems unlikely, there's the possibility that the duplex
setting is set to something that is causing the problem. For example if the
ports on the 3Com switches were set to Full Duplex and it was set to Half
Duplex on the PC's NIC, you would see the problem you're experiencing. You
could either check the setting on the 3Com switches, put a mini-switch in
there or... try a different NIC. Or.... like Newell said... leave work and
go get a stiff drink.




=======================================

John,

We have a stack of (3 total) 3com - 1100 switches in this closet
that feed that room.. I have tried different ports in each of them
with no luck. the most recent switch that I tried have 15 pc's
plugged in with no issues. It definietly seems to be a switching
issue, I just dont see any thing wrong with the config on the
switch. They have not had any issues in years plus that fact that
other pc's are connected. along with this pc working in our
shop... scratching my head on this one!


.

Relevant Pages

  • Re: about mirroring port
    ... number of them with the SPAN feature enabled and multiple spanned ports ... monitored by multiple instances of snort on a single Compaq box with very ... Subject: about mirroring port ... Higher end switches may work better. ...
    (Focus-IDS)
  • Re: Detecting multiple hosts behind a single managed switch port
    ... I'm looking for a tool that can query a list of managed switches (both ... would need to filter out ports that are connected to other managed ... EARN A MASTER OF SCIENCE IN INFORMATION ASSURANCE - ONLINE ... The NSA has designated Norwich University a center of Academic Excellence in Information Security. ...
    (Security-Basics)
  • Re: DHCP/Login Issue
    ... Make sure all of your ports are configured with "spanning-tree portfast" ... We are having an issue with DHCP and login to a Novell server whereby ... All of the access switches are connected to both core switches. ... on 10.x networks. ...
    (comp.dcom.sys.cisco)
  • Re: DHCP/Login Issue
    ... Make sure all of your ports are configured with "spanning-tree portfast" ... We are having an issue with DHCP and login to a Novell server whereby ... All of the access switches are connected to both core switches. ... on 10.x networks. ...
    (comp.dcom.sys.cisco)
  • Re: Duplex/Speed Hardcoding
    ... Have a colleague who insists every port on every switch be hardcoded to ... general app - that they now only hardcode the duplex settings? ... A long while ago we had a pair of non-Cisco switches and if you ...
    (comp.dcom.sys.cisco)
Loading