Re: Credentials and net use problem after IPSec VPN is build
- From: Juha <Juha@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Date: Thu, 30 Oct 2008 22:48:00 -0700
Thanks
Yes they do logon to domain allways. It is funny that the other domain
having this issue has also a win-radius server. When giving credentials to
VPN FW they give domain credentials to FW. In the FW there aren't any user
names or passwords it checks them from win-Radius server. But still they need
to give them again when trying to open a share.
In radius scenario the RRAS is not enabled.
Rgs,
Juha
"Robert L. (MS-MVP)" wrote:
Are they logon domain (even they don't connect to domain the domain.
physically) using domain credentials? If you logon local computer using
their local username. They may have this issue. Or this post may have more
details.
Can't map network drives over VPN
http://www.chicagotech.net/netforums/viewtopic.php?p=8355#8355
--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
"Juha" <Juha@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:0F9B5348-BE5E-4624-9516-B5B326C51256@xxxxxxxxxxxxxxxx
Hi
I have this problem in two separate systems.
-2003 R2 server domain
-VPN FireWall where IPSec VPN is terminated
-Third Party IPSec VPN Client SW where usernames and pws are same as in
the
server
-Net use /persistent:no
After the VPN tunnel is build I try to run "VPNLoginScript.bat" which maps
the drives to shares. For some reason I get this output very often:
net use y: /d
y: was deleted successfully.
net use y: \\192.168.1.10\Share
The password is invalid for \\192.168.1.10\Share.
Enter the user name for '192.168.1.10': MyLoginName@DomainName
Enter the password for 192.168.1.10:
The command completed successfully. <--- I can now open the share but why
it
asks credentials?
********************************
If I place user name in the shorter way, I get this:
net use y: \\192.168.1.10\Share
The password is invalid for \\192.168.1.10\Share.
Enter the user name for '192.168.1.10': MyLoginName
To connect DomainName\MyLoginName to 192.168.1.10, press ENTER, or type a
new user name <--- This appears until i give the user name in syntax
MyLoginName@DomainName
**************************
This might be DNS problem but I wonder if there is a way to get rid of
these
credentials questions. After all, when I login to a "VPNLaptop" I do give
domain credentials. Why they are asked again?
At least, is there a way to get a graphical Window asking for credentials?
Thanks,
Juha
P.S. The second place where I have this problem has a Radius Win Server
and
the FW is a Radius Client for that. The behavoiur is same.
I have tested scripts having some ping, static DNS server settings and
flushdns/registerdns commands but not really happy with them.
- References:
- Credentials and net use problem after IPSec VPN is build
- From: Juha
- Re: Credentials and net use problem after IPSec VPN is build
- From: Robert L. \(MS-MVP\)
- Credentials and net use problem after IPSec VPN is build
- Prev by Date: Wireless-Slow file transfer from Windows XP to Windows 2003 DC
- Next by Date: Re: Credentials and net use problem after IPSec VPN is build
- Previous by thread: Re: Credentials and net use problem after IPSec VPN is build
- Next by thread: Re: Credentials and net use problem after IPSec VPN is build
- Index(es):
Relevant Pages
|
